Best Sabaj in 2026

Sabaj A4 supports USB coaxial analog bluetooth and optical inputs

A4 is a small full digital class d bluetooth amplifier built-in headphone amplifier,80w*2 output power,supports subwoofer output.

BT4.2 Bluetooth Module,supports APT-X, press "mute" button to connect with last bluetooth device when BT input mode is working

Full balanced design and Using two SABRE9018Q2C decoding chips from ESS company in USA.Support high bit rate digital processing;Ultra High Dynamic Range;built-in big-power amp circuit, ultra-low distortion can restore a better sound;Dual DAC&circuit for better channel separation.

Using the second generation XMOS USB Audio solution — XCore200XU208.PCM sampling rate support up to 32bit/768kHz, and up to DSD512 supported.Exclusive customized driver supported native DSD which is very advanced in audio range.

Using two pieces of ultra-low phase noise crystal as an asynchronous clock system, make the sound is more accurate, resolution is higher

All-in-one personal headphone amplifier with onboard DSP

12 amp models from Mustang GTX for a wide range of clean and dirty tones

13 effect models with parameter modify control

Dual ES9219 HiFi DAC 2.5mm Balanced (4V RMS) 3.5mm Unbalanced (2V RMS)

Qualcomm QCC5124 Bluetooth Chipset HFP / HSP / A2DP / AVRCP LDAC / aptX Adaptive / aptX HD / AAC

Bluetooth and USB DAC 96KHz/24bit with embedded double-precision equalizer

2-channel Acoustic Guitar/Vocal Amplifier with Bluetooth Connectivity

Feedback Suppression

Built-in Effects

AK4493 DAC chips for the ultimate in decoding performance, supporting up to 768kHz/32bit and native DSD

Equipped with XMOS XUF208 USB receiver chip+AKM AK4493 DAC+ Op-amps OPA1642 + flagship TI TPA6120

Extremely powerful headphone amplification for a total power output of up to 1.5 W under a 32Ω load, and up to 20Vpp at 300Ω

CSR8675 Bluetooth 5.0 receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers.

For greater power independent Dual AK4377A DAC and detail resolution,the BTR3K features both balanced 2.5mm and single-ended 3.5mm outpts.

Can be remotely controlled via FiiO Music app to switch channel balance,8 different DAC lowpass filter and 10-band EQ

4-channel stereo headphone amplifier for use with all types of headphones

4 high-power stereo amplifiers

Highest sonic quality even at maximum volume

Easy to Operate Design: The refined E10K-TC is tiny enough to carry with you wherever you go but is also right at home on your desk to make your music sound great anywhere, the small yet easy-to-operate design makes it a perfect companion for listening

Impeccable XMOS Decoding: The E10K-TC comes with the flagship XMOS XUF208 for better USB decoding. Compared to the original E10K, the USB Audio class has been upgraded to 2.0, and PCM is now supported up to 32 bit/384kHz sampling rates to better capture the details in your music

Quality Chips to Delight your Ears: The DAC is the PCM5102, with improvements to the flatness and delays of the internal digital filter meaning better sound quality and less audio delay. A high current amp circuit ensures good output power with great transient response

Input Sensitivity: 125mV–5V (Low Level) / 1V–40V (High Level)

Signal-to-Noise Ratio: 95dB

Frequency Response (Hz): 10Hz-20kHz

2.1CH Bluetooth 5.0 Power Amplifier: Exquisite design, improved operation, great sound performance.

BT30D supporting Bluetooth and RCA input can drive most home passive speakers, passive/powered subwoofer. SUB volume/Frequency, Bass/Treble control ensure Hi-Fi music quality.

BT30D wireless stereo amplifier adopts 2 pcs Texas Instruments TPA3116D2 chip. The TPA3116D2 are stereo efficient and digital amplifier power stage for driving speakers, with advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences. High-performance effectively improve output power and audio quality. Max power output up to 200Watt.

Mighty Plug is a handy silent-play gear for Guitar and Bass.

13 Amplifier Models,19 Variety of Effects. Adjust the setting by Mobile APP.

Rechargeable Li Battery,3 hours playing time.

UPGRADED CHIP WITH 80W+80W : NEW F900S bluetooth receiver amplifier provides 80W+80W dual channel stereo output with the Upgraded chip MA12070, which is more powerful! Impedance: 4~8 Ohm.

THREE INPUT OPTIONAL: Supporting AUX/ USB/ Bluetooth input. But the amp module can be searched and connected via Bluetooth when unplugging audio input line. Insert audio input line, then it will auto switch to wired input mode, Bluetooth function will be lost.

SUPER COMPATIBILITY: Our Bluetooth audio transmitter can be widely applied to various tablet PC, TV, smartphone, Laptop with Bluetooth and etc, versatile and simple to use. But it does not apply to a range of products launched by Amazon such as Echo, Alexa ect. and Bose Speakers.

【Stereo sound source】Amplifier 4 channels, with independent volume knob, can be used for up to four outputs: no sound burst, minimum distortion at maximum volume. When all four headphones are connected, the signal is not lost. The 4-channel headphone amplifier will be excellent, allowing up to four people to monitor the mix simultaneously for tracking.

【Stereo independent control】 Independent MONO/STEREO control buttons is easy to control mono and stereo audio source, when your audio source is mono input, you can press the stereo button to simulate the stereo effect.

【Stereo quality】Mini stereo amplifier with 4X 1/4 "stereo headphones TRS output connector jack, 1/4" TRS source input connector jack. ◆ Stereo ◆: You must use 1/4 ”TRS stereo audio cable for male-to-male connector for input and output connection. ◆ Mono ◆: 1/4” TS for male-to-male connector for input and output connection Device. ■■ TRS / TS cable is not included in the packaging

Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N. 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.

RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.

ORIGINAL Tripath TA2020-020 amplifier chip provides efficient, powerful sound

LIMITED SUPPLY will impact pricing

Compact size makes this amplifier great for projects and DIY audio applications

TDA7498E 320W power amplifier for home theater speaker systems with aluminum enclosed, small size but powerful, good-looking, simple functionality, and easy to operate, achieving excellent sound quality.

Fosi Audio TDA7498E 2.0CH audio integrated amplifier adopts STMicroelectronics TDA7498E chip. The TDA7498E is a dual BTL class-D audio amplifier with a single power supply designed for home speaker systems applications. Special features: smart protection, thermal overload protection, the small offset of less than 20 mV, standby and mute features, differential inputs minimize common-mode noise.

2x160W ultra power amplifier, fully integrated audio amplifier architecture with RCA input, unparalleled power efficiency, optimized for music playback with very low power losses and cool operation.HD audio quality, best-in-class audio performance - high dynamic range, low distortion, low noise.

✅ PORTABLE DESIGN - Your music will never stop with up to 6 hrs of battery life and a slim, lightweight design perfect for carrying in your pocket wherever life takes you

✅ HIGH RESOLUTION AUDIO - From Spotify to Tidal MQA to MP3 and beyond, play any high res audio format with native digital to analog conversion so you can listen to any song the way the original recording was intended

✅ POWERFUL AMPLIFIER - Suited to your style, listen to in ear monitors or drive over the ear headphones with 400 mW max power output from the on-board amplifier

Phono Preamplifier with Stereo RCA Inputs

1 x Stereo 1/4" Output

Stereo RCA Outputs

TB10A is a highly efficient, fully integrated, digital audio power amplifier based on NEW class D amplifier technology. It supports a 12-24V supply voltage range, allowing it to be used in many different home audio applications.

TB10A 2.0CH home audio amplifier adopts 2 pcs Texas Instruments TPA3116D2 chip. The TPA3116D2 are stereo efficient and digital amplifier power stage for driving speakers, with advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences. High-performance effectively improve output power and audio quality.

Ultra-compact and high power output in a small aluminum enclosure. MAX Power Output up to 100W X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD). TB10A can drive 200watts(8 ohm), 300watts(4 ohm) passive speakers.

UPGRADED CHIP WITH 80W+80W : NEW F900S bluetooth receiver amplifier provides 80W+80W dual channel stereo output with the Upgraded chip MA12070, which is more powerful! Impedance: 4~8 Ohm.

THREE INPUT OPTIONAL: Supporting AUX/ USB/ Bluetooth input. But the amp module can be searched and connected via Bluetooth when unplugging audio input line. Insert audio input line, then it will auto switch to wired input mode, Bluetooth function will be lost.

SUPER COMPATIBILITY: Our Bluetooth audio transmitter can be widely applied to various tablet PC, TV, smartphone, Laptop with Bluetooth and etc, versatile and simple to use. But it does not apply to a range of products launched by Amazon such as Echo, Alexa ect. and Bose Speakers.

[High-performance DAC&USB decoding chip]: The K5Pro ESS headphone amps achieves new heights in sound quality and comes with a high level of resolution sound. ES9038PRO with 32-bit processing, along with the XUF208 USB decoding chip with 768kHz and DSD256 inputs, and it also upportes mobile phone connectivity.

[Variety of inputs]: Supports coaxial/optical/RCA line-in inputs, with optical and coaxial inputs supporting up to 192kHz inputs, K5Pro ESS amplifier is convenient for connecting various music players and digital interfaces.

[Variety of outputs]: Supports 6.35mm (1/4 in.) headphone out/RCA line-out outputs, the RCA line-out line signal is adjustable up to a maximum of 2Vrms, so the K5Pro ESS portable DAC can be used with a variety of active speakers and external amplifiers.

[High-performance DAC ES9219C*2]: For extremely detailed reproduction of sound, stronger, better performance.

[Support full hi-res wireless Bluetooth format]: CSR8675 Bluetooth 5.0 receiver designed to deliver studio-quality sound through your ears WIRELESS - the bluetooth amplifier BTR5 2021's Bluetooth version 5.0 supporting high-resolution formats such as AAC/SBC/aptX/aptX Low Latency/aptX HD/LDAC up to 96kHz, you can get a totally portable yet excellent sounding setup with your device!

[Support MQA ]: A new addition to the updated BTR5 2021 bluetooth headphone amps is support for MQA Renderer, allowing for high-resolution, master-level sound quality in reasonably sized files well-suited for your mobile device. PS: Supports up to MQA 16x decoding with applicable music apps.

✅ EASY BLUETOOTH CONNECTIVITY - The latest Qualcomm 5100 series Bluetooth (only input) DAC supports Bluetooth 5.0TM in all current and future formats such as AAC, aptX, aptX HD, LDAC, HWA Codec. Easily stream your favorite music in CD quality to your system from your smart phone, laptop, DAP, or any device that transmits Bluetooth. Control your music with your favorite music app, sit back and relax

✅ HIGH RESOLUTION AUDIO - With CD quality aptX HD AAC Bluetooth up to 24 bits / 192 kbps you will experience higher quality audio than standard Bluetooth Without the drop in quality your music will have better definition and clarity

✅ ANALOG OUTPUT - For an easy upgrade connect via single-ended RCA to an amp or active speakers or via 4.4mm output to amp / speakers with a balanced output

Small Super Powerful Voice Amplifier/Speaker Mp3 player & FM Radio. Size is 3.7in diameter x 5.8in length

Rechargeable lithium batteries that last 10-15 hours of continuous use before needing a charge. Battery life will last 2-3 years. Very loud, excellent clarity, low feedback. Sound covers over 7,000 square feet.

USB port and MicroSD Port with controls for playing Mp3 music. Can also be used as a speaker for external Mp3 players. The amp has a microphone input and a MP3 input . The amp will accept signals from both input ports and out through the speaker at the same time. FM Radio with automatic tuning.

Stereo/Parallel/Bridge-Mono Mode

User Selectable Input Sensitivity - 0.775V And 1.4V

Electronically Balanced Rca & Xlr Inputs; Binding Post And Speak On Outputs

【High power】 High power of headphone amplifier suited for high impedance professional headphone, make sure there is enough volume in noisy surroundings. (Don't support microphone)

【Professional in-ear monitor】Outstanding technical, sonic characteristics, high audio reproduction and no audio rendering for professional personal in-ear monitor.

【Practical interface】XLR and TRS input connector with locking mechanism, Stereo/mono source switch depending on cable connection

👍 Up to DSD256 and PCM384 ▶️ TOPPING D10s USB DAC is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) If you need a DSD configuration guide, please contact the seller HIFI COLLEGE.

👍 XMOS XU208 and Customized Driver ▶️ TOPPPING D10s DAC use XMOS XU208 for USB interface and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz

👍 Automatic Power On/Off ▶️ Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC

Stereo/parallel/bridge-mono mode

User selectable input sensitivity - 0. 775V and 1. 4V

Electronically balanced RCA & XLR inputs; binding post and Speak on outputs