Best Shinico in 2026

2 Bearings : 2 bearings inside the pulley, which made the roller work smooth and silent. To avoid damage to the rope due to excessive friction.

Maximum Loading Capacity: 551 pounds(250kg); Fit for 0.39 inch (10 mm)wire ropes and hemp ropes.

High Quality: Made of durable hard 304 stainless steel, high hardness, anti-rust. Suitable for indoor.

2 Bearings : 2 bearings inside the pulley, which made the roller work smooth and silent. To avoid damage to the rope due to excessive friction.

Fit for 0.39 inch (10 mm)wire ropes and hemp ropes.

High Quality: Made of durable hard 304 stainless steel, high hardness, anti-rust. Suitable for indoor.

Easy installation: Pulley Wheel has 4 mounting holes with a diameter of 7 mm(0.27 inch).It can be mounted on wood, wall.

The pulley can carry a weight of 850 pounds. Fit for: 3-12 mm wire ropes.

Super Mute: There are two bearings inside the pulley, which can reduce the friction of the wheel and turns more flexibly and has no noise.

For Synthetic Rope Diameters 5/16 to 1/2 inch (8-12mm)

Billet machined 6000 series aluminum

Mil-A-8625 F Hard Anodized Surface

These Single/Double Rescue Pulleys are great choices for anyone who need a quality-manufactured pulley for mountain rescue, tower work, ski patrol or whatever requires block and tackle system.

For hauling big load, large pulley is much more better and easier.

Mounted with ball bearing for higher efficiency and smoothness. Swing side for easy and rapid rope installation and remove

3" Sheave Size

3/8" Wire Rope

Working Load Limit: 2 Tons

RESTORE SHOULDER HEALTH- Shoulder pulleys use the force of gravity to gently increase range of motion and blood flow to the shoulder joint. This passive exercise helps the healing process and gets you to a pain-free range of motion.

SHOULDER PAIN RELIEF- The shoulder is a self-lubricating joint, but if there is little to no movement there is no lubrication. Smooth movements with a shoulder pulley help the shoulder lubricate itself. “Oil” for the shoulder is stored in a sub-surface tissue sack called the bursa. The only way this “synovial fluid” can be pumped from the bursa through the shoulder is with movement.

METAL BRACKET – Included metal bracket attachment makes it easy to attach the pulley system to the top of the door. Both sides of the bracket are padded with foam or a plastic sleeve. Fits most 2 inch doors and does not cause damage.

Package Included 1 Spindle Assembly

Replaces 618-04636, 618-04636A, 756-04356, 918-04636, 918-04636A, 918-04865, 918-04865A

Replaces 13029 82-128 285-847

DIY Attachment for home gym LAT pulley system,lifting blocks,hoists,ladder lift,gym Equipment, DIY Home Projects, clothesline, shop lifts

90 mm 3.54 in. diameter; Maximum working load: 160 kg / 350 lbs.

For cord and wire with a diameter up to 7 mm / 0.28 in.

🚕【LOADING CAPACITY】Made of durable heavy duty steel provide up to 10 T/22000 LB Max Load, suitable for most off-road recovery situations.

🚕【WORKING PRINCIPLE】The pulley is used to distribute the force, thus reducing the load of the winch, preventing the winch from overheating, increases winch pulling power and extending the service life of the winch. The use of pulleys can be used to achieve an angular pull, thus helping vehicles in difficult situations to get out of trouble.

🚕【UNIVERSAL FIT】Accepts cable/rope 1/2" to 3/4".Perfect for navigating around trees and other obstacles to get your ATV, UTV, or 4x4 back on the trail, easily drag truck tractor ATV or UTV out of snow or anywhere that needs recovery.

【UPGRADED PULLEY】Sumpley pulley is made of aluminum with a red coating on the surface,so the pulley is very quiet and smooth.Smooth sliding,double-sided silent bearing,no noise.

【Premium Material】Made of aluminium alloy with great sturdy, anti-rust, wear-resistance and corrosion-resistant with highly strong structure.The best choice for fitness equipment and tools

【DIY Accessory】The package includes Heavy Duty Hanging Straps and Locking Carabiner.DIY Attachment for home gym LAT pulley system,home gym, lifting blocks, hoists, ladder lift, gym equipment, clothesline

2 Bearings : 2 bearings inside the pulley, which made the roller work smooth and silent. To avoid damage to the rope due to excessive friction.

Maximum Loading Capacity: 551 pounds(250kg); Fit for 0.39 inch (10 mm)wire ropes and hemp ropes.

High Quality: Made of durable hard 304 stainless steel, high hardness, anti-rust. Suitable for indoor.

2 Bearings : 2 bearings inside the pulley, which made the roller work smooth and silent. To avoid damage to the rope due to excessive friction.

Fit for 0.39 inch (10 mm)wire ropes and hemp ropes.

High Quality: Made of durable hard 304 stainless steel, high hardness, anti-rust. Suitable for indoor.

Fit for Cub Cad LT1050 LT1045 LTX1040 LTX1046 LTX1045 LTX1050 RZT50 LT1550 SLT1554 RZT54 GTX1054 GTX2154LE LGT1050 LGT1054 LGTX1050 LGTX1054 CC760 CC760ES i1042 i1050 GT1054 GT2544 GT2550 GT2554 RZT-L50 RZT-L54 RZT-S42 RZT-S46 RZT-S50 RZT-S54 SLTX1550 SLTX1054 LT1040 LTX1042 RZT42 RZT54 RZT-L42 RZT-L46 etc.

Also Fit for Troy-Bilt GT50 GT54 RZT42 RZT50 TB42 TB2142 TB2246 TB2450 Pony Bronco Super Bronco Horse Big Red Horse Range Rider Mustang Mustang XP Colt XP etc.

Work with 42" 46" 48" 50" 54" Deck, Replaces 756-04129 753-08171 756-04129B 756-04129C 956-04129 956-04129C.

Made of high quality steel, this gy22172 idler pulley is solid built and durable to use. Please check the size and replacement part number before buying.

Work with John Deere 42 inch and 48 inch mower deck, Replaces part# GY20067, GY22172

Easy to install and runs smooth and quiet, Measures 3-5/8 inch OD, 11/16 inch ID, 1-3/16 inch Height

Dimension:OD of pulley: 6-1/2" (142mm);Height: 6-7/8" (174mm);Spacing of the holes for the mounting bolts:5" (127mm).Please check your dimension.

Replace Cub Cadet 918 04865, 918 04865A, 918 04636, 618 04636,MTD: 618 04636, 618 04636A, 618 04865A, 918 04636, 918 04636A, 918 04865A,Rover: 618 04636, 618 04636A, 618 04865A, 918 04636, 918 04865A,Troy-Bilt: 618 04636, 618 04636A, 618 04865A, 918 04636, 918 04865A, 918 0865A tractor.

Replace Rotary 13029, NHC 251-6665, Sunbelt B1CC113, 80-12-083, CP 30-9184636, PP824636,Stens 285-847,C-SPN-0009,Fit 2009-up LTX1045 LTX1042 LTX1046 & Z-Force 46" decks with 2 blades.

GM CLIMBING Micro Prusik Minding Pulley (PMP), rated at 20kN/4500lbs MBS, both CE and UIAA certified, compatible with ropes up to 1/2 in / 13mm. Function pulley installed on ropes and clipped to tend hitch slacks in Ddrt climbing or work-positioning. A day-to-day use pulley in riggings, integrated with prusik hitches to build progress capture on haul system, making efficient redirects in bear rigging, home pulling exercise devices, and more to explore.

Quality-made climbing pulley, with 20kN breaking strength [5kN higher than required 15kN by CE and UIAA], to build up efficient pulley mechanical advantage systems: haul your partner out of the crevasse - personal rescue, rig gears or heavy loads when mountaineering, pull out a stranded car/ boat, haul food and stuffs out of reach when camping - bear rigging.

Palm-size pulley in lightweight of 3.7 oz. The micro pulley is easy to use with only one hand. Mobile side plates rotate freely around the axle and it's convenient to install the pulley anywhere on the rope. The pulley accommodates carabiners of most shapes since side plates are curved to stay fully close against each other on the top.

Type: Single pulley block, heavy duty rigging hardware.

Specification: Size: M50; Wheel Diameter: 50mm; Groove Width: 13.5mm; Eye Diameter: 20mm; Total Height: 95mm; Weight: 368g; Max Load: 400kg

High Quality: Made of stainless steel, high hardness, damp-proof, anti-corrosion, rust resistance.

Fit for MTD / Cub Cadet / Troy Bilt 38" 42" 46" 54" Decks

Dimensions: 3/8" ID; 4 7/8" OD; 1-1/8" Height

Replaces OEM Part Numbers: Cub Cadet / MTD 753-08171, 756-04129B, 756-04129C, 956-04129, 956-04129C; OREGON 34-204, STENS 280-646

Secure Bite: accompanied with dual camming plates, our rope grab provides a secure pressure on the rope without damaging the rope itself

Extra friction: the dual camming plates come with two rows of teeth on each plate set to ensure that there is no chance of that rope slipping through with each bite without fail each time.

Construction: Our rope grab is constructed of American Alloy Steel weighing just 16 ounces, even at the feel of our rope grab you obtain peace of mind knowing you are on a solid and trust worthy piece of gear no matter the job you are doing

Material: This Fusion Climb Strux Pulley FP-8152-BLU is made from a lightweight and durable Aero Space Aluminum Alloy. This pulley is perfect for various activities due to its high strength and lightweight.

Feature: The Strux Pulley featured side swing cheeks, which allow for the dual pressed aluminum frames. Giving a more secure use and easier rope installation and removal.

Feature: Efficient and smooth rotating sheaves held together by two aluminum rivet pins which provides the best user experience, reducing wear and tear on your rope to ensure the best product lifetime.

Idler Pulley

3-1/2 Inch OD, 3/8 Inch ID, 2-1/8 Inch Height

Also replaces Flymo 532-179114

Genuine Oregon Part

Double Pulley Assembly w/Bearings

Used on 42" Decks with 2 Belt System, 5" OD

[Material] Anodized light alloy Swing side plates and pulleys for easy and rapid rope installation and removal! Net Weight:1 Ib(480g); Dimensions:3.23"(W) * 6"(L)

[Double Pulley] 2" aluminum, 2 independent wheels for multiple pulley setups, side swing aluminum side plates with smooth rounded edges.

[Applicable Rope] Suitable for most of ropes with max diameter up to 16mm/0.6 inch, which can be used for emergency rescue, hauling, downhilling, ect. Breaking Strength: 30kN / 6746 lb for high durability to satisfied your requirements.

Replacement MTD original equipment part

Replaces Part Number 7560627, 756-0627, 756-0627B and GW-7560627

Diameter: 3.50 inch

Material: This Z-Max pulley is stable and amazingly fast! Thoughtfully made from an industrial grade carbon steel, for the best user experience and product retention.

Feature: Quick and easy clip in installation at any point is possible with the Z-Max! To install rope or wire simply grab each handle and pull away from each other, two spring sets on each roller will allow for the plates to open but also close completely.

Feature: These chrome steel wheels with sealed chrome steel ball bearings secured with a ½ inch bolt on each wheel to ensure a smooth and secure ride. These wheels will accommodate up to a 13 mm rope, making this the perfect zipline glider.

GM CLIMBING Micro Prusik Minding Pulley (PMP), rated at 20kN/4500lbs MBS, both CE and UIAA certified, compatible with ropes up to 1/2 in / 13mm. Function pulley installed on ropes and clipped to tend hitch slacks in Ddrt climbing or work-positioning. A day-to-day use pulley in riggings, integrated with prusik hitches to build progress capture on haul system, making efficient redirects in bear rigging, home pulling exercise devices, and more to explore.

Quality-made climbing pulley, with 20kN breaking strength [5kN higher than required 15kN by CE and UIAA], to build up efficient pulley mechanical advantage systems: haul your partner out of the crevasse - personal rescue, rig gears or heavy loads when mountaineering, pull out a stranded car/ boat, haul food and stuffs out of reach when camping - bear rigging.

Palm-size pulley in lightweight of 3.7 oz. The micro pulley is easy to use with only one hand. Mobile side plates rotate freely around the axle and it's convenient to install the pulley anywhere on the rope. The pulley accommodates carabiners of most shapes since side plates are curved to stay fully close against each other on the top.

▶Material◀: The pulley is made of 304 stainless steel with strong structure, anti-rust, wear-resistant, high temperature-resistant, moisture-proof. It can be used continuously without fear of damage.

▶Easy to Use◀: Rotation cylinder head is solid, 360 degrees rotation to prevent rope from knotting, smooth turning wheel. You can quickly combine single pulley block and spring snap hook.

▶Dimension◀: M15 Single Pulley Size: Length: 2.44in(62mm), Width: 0.83in(21mm), Max Load: 80 lbs(36kg). Spring Snap Hook: Max Load: 119 lbs(54kg).

✅ COMPLETE SET: Shankly’s alternator pulley puller set or pulley puller and installer kit feature a combination of components including TRX-Star-T50-33T*113mm, Spline-M10-33T*113mm,3/8"Sq Drive. Includes special installer adapters with a carrying case

✅ EFFECTIVE DESIGN: Used for removing and installing pressed-on alternator, power steering pump, and other pulleys. Allows alternator shaft to be held while the pulley retainer is removed, helping the mechanic complete the job quickly and safely

✅ EASY REMOVAL: Shankly’s alternator pulley removal tool kit or puller pulley permits easy removal of freewheel alternator, either on or off the vehicle, making simple work of alternator removal and installation jobs. Use on most power steering pulley

【Premium Material】 Made of 304 Stainless Steel, anti-rust and wear resistance with strong structure, manufactured in strict process, reliable and durable.

【360 Degree Flexible Swivel】 360 degree swivel top ring for ease rope handling, Prevent rope from knotting, convenient to use, smooth roller provides great rope traverse.

【Small Size Big Capacity】 Size: M15; Runner Diameter: 15mm/0.59inch; Wheel Width: 6mm/0.23″; Rotating Ring Width: 11mm/0.43″; Total Length: 60mm/2.36inch; Max Load: 35kg/77lbs. What a Simple but strong roller.