Best Ict Billet Power Pulleys in 2026

POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles; Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines

WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps; Pulls pulleys on GM belt-driven vacuum pumps

HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability; Power steering pump pulley installer designed to tackle any small pulley job

High Quality: Made of high quality cast iron with electrophoresis, durable, corrosive resistant.

Single Groove&A Belt: Features A cross section and one groove, it can only use for the single belt.

Size: The outer diameter is 3 inches. The bore is 5/8".

Direct replacement of original pulley.

Simple installation with correct tools

Tested to meet same performance as O.E.

Provides power to the engine accessory drive system for proper engine performance

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.

✅ COMPLETE SET: Shankly’s alternator pulley puller set or pulley puller and installer kit feature a combination of components including TRX-Star-T50-33T*113mm, Spline-M10-33T*113mm,3/8"Sq Drive. Includes special installer adapters with a carrying case

✅ EFFECTIVE DESIGN: Used for removing and installing pressed-on alternator, power steering pump, and other pulleys. Allows alternator shaft to be held while the pulley retainer is removed, helping the mechanic complete the job quickly and safely

✅ EASY REMOVAL: Shankly’s alternator pulley removal tool kit or puller pulley permits easy removal of freewheel alternator, either on or off the vehicle, making simple work of alternator removal and installation jobs. Use on most power steering pulley

Power-steering pump pulley kit for most domestic vehicles

Use for installation and removal

Includes adapters for several different vehicle models

IDEAL USE: For holding camshaft gears stationary on OHC engines

ADAPTABLE: Also works on injection pump and other hears and pulleys

COMPATIBILITY: Works on many Toyota, Nissan, Mazda, and other makes

Shaft Sleeve inside diameter 3/4'' , outside diameter 1''

Shaft Sleeve length about 3'' , Keyway slot 1/4'' , Step Key Length about 2''

The sleeve and step key are designed to exact fit on your 3/4” diameter crankshaft with 3/16” keyway and enlarge it to 1” diameter with 1/4” keyway

Direct replacement - this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications

Restores functionality - reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Compatible With SBC Engines With Double Hump Heads Or Standard Heads

Compatible With A V Belt System

Compatible With A Long Style Water Pump

ITEM SPECIFICATIONS: Our Power Steering Pump Pulley Remover and Installer Tool Kit is a disconnect toolset that releases the power steering pulleys from the pump and installs new ones on most American domestic vehicles. The kit fits pulley hubs with diameters of 1 1/8 inches, 1 1/4 inches, 1 5/16 inches, and 1 3/8 inches. This kit is a must-have for the new plastic pulleys found on newer vehicles!

PROPER USE: Use lubrication on the tools prior to use. Place the threaded screw in the center of your pulley with the half-moon clamp shells and lip retaining ring surrounding it, then place the grabber nut center piece with a die on top. Tightly screw the threaded stud onto the center of the end of your puller nut, and then use your tool of choice to loosen and remove. When you're finished, store the tools safely in the included high quality storage case.

APPLICATIONS: This Power Steering Pump Pulley Remover and Installer Set is compatible with Saginaw, compatible with Thompson, and compatible with Ford C111 C2 power steering pumps (Compatible with Ford, compatible with GM, and compatible with Chrysler vehicles). The two included screws are suitable for use with Ford, for use with Chrysler, for use with GM, and for use with Volkswagen power steering pulleys. The kit even includes a quick disconnect for use with GM power steering lines.

This steel shaft sleeve adapts a crankshaft from 3/4 inch to 1 inch diameter, it comes with step key that offsets from 3/16 inch to 1/4 inch.

Alters motors with a different diameter shaft and alters pulleys for a different speed or belt.

Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements.

【Application】The flat idler pulley is used in conjunction with the belt to transfer power from the engine to the tractor.

【Compatible Models】The idler pulley is compatible with ①Craftsman YS4500, 917203780, 917250220, 917272233, etc. ②HU YTH1542, YTH1848, YTH2148, GTH2248, ③Poulan Pro PB195H42LT, PB20H42YT, ④Weed Eater W14538, WELRVBA30, etc. lawn tractors.

【Replaces OEM Part Numbers】177968, 193197, 532177968, 532193197, Ariens 21546308, Murray 708000, Murray 705061. Please check the original part number and make sure this part fit your model before ordering.

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank.

Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3"

The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat

Specs: ID: 3/4". OD: 4". Keyway Width: 3/16". Belt Width: 1/2".

Preferred by experienced mechanics for maintaining outdoor power equipment

Stens one-year warranty ensures reliability and performance for every part

3 1/2” FLAT IDLER PULLEYS - Each pack includes 2 pieces of black flat idler pulleys with an overall outer diameter of 3 1/2 inches, an inner diameter of 3/8 inch, and a height of 1 1/2 inches

OEM-QUALITY EXACT REPLACEMENT FLAT IDLER PULLEY - Manufactured according to OEM specifications with special consideration for quality and durability. Exact replacement for part numbers 280-6630, 194327, and 532-194327

COMPATIBLE WITH ARIENS, CRAFTSMAN, HUSQVARNA, AND POULAN - These flat idler pulleys are interchangeable with select yard tractors and riding mower models, including Poulan C20H42YT, Poulan PB19H42LT, and Poulan PB19H42YT. Consult your model’s user manual for the required pulley part number

Single Groove Short Water Pump Pulley

Fits SB Chevy 1955-1968 SBC 283 305 327 350 383 400 using a Short Water Pump

Pulley Diameter Is 6 5/8", Pulley Is 3" Tall,Bolt Pattern Is 1 3/4"

Idea for removes and installs steering pump pulley other press-fit pulleys

Fits pulley hubs with diameters of 1-1/8 inch, 1-1/4 inch, 1-5/16 inch and 1-3/8 inch

Includes adapters for several different vehicle models: GM 2.3L Quad 4 four-cylinder engines; GM 3.1L, 3100, 3400, and 3800 V6 engines

Cost-effective solution - this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed

Durable components - this bypass pulley uses quality components for a long service life

Easy to install - uses the same mounting points as the A/C compressor

Kit includes: (1) New Chrome Saginaw "Key-Way" Power Steering Pump, (1) Chrome Steel Pump Bracket Kit, (1) Chrome Groove Pump Pulley(5-3/4" diameter), (1) Chrome Power Steering Pump Cap

1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare

A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head.

Chevy Small Block Pulley Kit - V-belt (350, 283, 302, 327, 305, and 400)

Made in the USA from 6061-T6 Billet Aluminum

Designed for engines with Long Water Pump

Includes (1) Mtd 756-05024 Lawn Tractor Ground Drive Idler Pulley Genuine Original Equipment Manufacturer (OEM) Part

Compatible models include Craftsman 247202420, 247204430, 247270480, 247270440, 247204420, 247204440, 247270420, 247204380, 247270380, 247270490, 247270550, 247204390, 247204450, 247270390, 247270470, 247204400, 247204470, 247273340, 247270421, 247270481, 247270441, 247270460, 247270491, 247270551, 247270560, 247270400, MTD CYT4220SE (13APA1KS897)(2015), CYT4622SE (13APA1KT897)(2015), CSLT5424 (13AQA2KW897)(2015), CYT4220 (13AXA1KS897)(2015), CYT5023SE (13AQA1KQ897)(2015), CGT5426 (14A7A3KW897)

MTD Genuine Parts are made for MTD's family of brands including Troy-Bilt, Yard Man, Arnold, Remington, Yard Machines, Columbia, Murray, Robomow, and more.

Replacement Belt Tensioner & Pulley Assembly - Transports power to the alternator, power steering pump, air conditioning and keeps it running smoothly and effectively. It is designed for vehicles that needs an automatic belt tensioner. The torsional round spring design provides consistent tension for maximum durability.

Compatible Replacement for Ford Vehicles - 2003 E-350 Club Wagon 7.3L V8 Diesel | 1997-1998 E-350 Econoline 7.3L V8 Diesel | 1997, 1998, 1999, 2000, 2001, 2002 E-350 Econoline Club Wagon 7.3L V8 Diesel | 2000-2003 Excursion 7.3L V8 Diesel | 1999, 2000, 2001, 2002, 2003 F-250 Super Duty 7.3L V8 Diesel | 1999-2003 F-350 Super Duty 7.3L V8 Diesel |.

Replaces Part# BT50, BT-50 - If you are experiencing grinding or squeaking noise from the front of your vehicle then you may have a problem with your serpentine belt tensioner. Power steering and AC may stop working and if it completely fails then you may experience overheating in the engine and your car may break down. Cracks and wear on the accessory belt may also be visible.

Brand New Black Steel Pulley kit

This kit will work on all Small Block Chevy Motors With a "SHORT" water pump

This Water pump pulley is 6.40" diameter and is 2-3/4" Deep Measuring From Front To Back

Ford Small Block V-Belt Crankshaft Pulley - 4 Bolt Crank with 2 Grooves

Made in the USA from 6061-T6 Billet Aluminum

Underdrive Ratio Increases Horsepower by 10 - 20 HP

Chevy Big Block Pulley Kit, LWP, V-belt (396-427-454)

Made in the USA from 6061-T6 Billet Aluminum

Designed for engines with Long Water Pump

Double-Groove Aluminum Long Water Pump Pulley

Compatible with Small Block Chevrolet 262 302 400

Precisely Machined for a perfect fit and unbeatable reliability. Water Pump Shaft: 5/8" and 6.600" Outside Diameter

V-Belt Pulley kit (4 Bolt Crank) for Ford Small Block 302, 351W and 351C engines

Made in the USA from 6061-T6 Billet Aluminum

Underdrive Ratio Increases Horsepower by 10 - 20 HP

Fits all Imprezas 93-11

Fits all Legacy 1994-2009

Fits all Forester 1998-2009

Package Dimensions: 7.0 L x 4.0 H x 6.0 W (inches)

Package Weight : 1.5 pounds

Country of Origin : United States