Best Shitong in 2026

Brass M3 Treaded Standoff

Nut and Screw assortment kit.

Male end thread length: 4mm

ASsorted Non-Insulated Terminals(Ring Fork U-Type Spade Non-insulated terminal )

Material of Body : metal

Surface : Tin-Plated

Robust plastic case with carrying handle: 16 different screw sizes with a practical SPAX bit-Check with 6 different bit-sizes, Rapidaptor bit-Holder clear and neatly sorted. SPAX exclusive WIROX surface: 20 times higher corrosion resistant compared to conventional bare galvanizing than standard requirements

MULTI head countersunk head for flush sinking and comfortable processing, mills in wood, stops on metal. Optimal power transmission and clean fit even when processing overhead with SPAX Bit T-STAR plus with guide pins

For getting the job done: No pre-drilling (wood-dependent). Easy penetration, reduction of the gap effect by 4CUT: Four edges in the screw tip. Easier cutting of the wood fibers due to SPAX-profile

"QUICKLY IDENTIFY BOLTS AND NUTS - The SST Identibolt is your One-stop Shop for Verifying the Size and Thread Pitch of All Your Standard Hardware! Never Again Wonder What Size Fastener You Have! Easily Distinguish Between Metric and Inch Thread Sizes, and Quickly Measure Bolt Lengths and Nut Diameters (Unless You'll Miss Making Multiple Trips to the Hardware Store)"

ULTIMATE NUT AND BOLT IDENTIFICATION TOOL - The Identibolt Measures Common Imperial SAE and Metric Thread Sizes, Identifying Hardware from #6 to ½" & 4mm to 14mm. Each Size is Accompanied By a Male Thread (for Nuts and Washers), and a Female Thread (for Bolts and Screws).

DURABLE AND BUILT TO LAST - SST's 4"x20" Solid Metal Plate Construction is Hard Anodized for Maximum Thread Strength, With Laser Etched Markings that Will Never Fade or Get Scratched off. Multiple Mounting Holes Give You the Option to Wall Mount it, Secure it in Your Toolbox, or Keep it on Your Workbench!

🔦Feature - 【Upgraded Double-sided Printing Size】The Inch & Metric Thread Checker is an accurate and easy-to-use thread identifier for both nuts and bolts. Each individual gauge features a male threaded stud on one end and a female threaded hole on the other. The Thread Checker is especially well suited for distinguishing between similar inch and metric threads. Conveniently assembled onto a wire loop, it's the perfect portable solution!

🔦Nut & Bolt Thread Checker - Each size has a nut and bolt checker on the same gauge 26 male/female gauges - 14 inch & 12 metric.

🔦Zinc Plated for Inch Size - Includes 14 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20

🔦【CKE Patent Design Detachable Nut & Bolt Thread Checker】The Inch & Metric Thread Checker design with detachable wire loop in both ends, you can open or off to use anywhere, provides more possibilities for using space. Also you can select individuals or parts to use or take out frequently used parts and use them in a single wie loop. This is a great design based on thousands of of CKE Nut & Bolt Thread Checker customers. Conveniently assembled onto a wire loop, it's perfect portable solution!

🔦【Upgraded Double-sided Printing Size】This Nut and Bolt Thread Checker with upgraded double-sided sizes by laser printing, it solve the problem that may need to be rotated to see the size during use, more convenient and faster to use. The laser print marking ensure that the color and mark will not fade after, even will be more obvious a long period of use.

🔦【Zinc Plated for Inch Size - Includes 23 Inch Size part numbers】 6-32, 6-40, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 9/16-18, 5/8-11, 5/8-18, 3/4-10, 3/4-16,1-8, 1/12

Top Quality Nut, Bolt & Screw Gauge; For Use With Standard or Metric, Coarse & Fine Diameters, Lengths & Thread Pitches

Material: Plastic

This gauge has 'MarineBoltSupply' printed on the back

1. Product type: High precision hex socket head cap screws with nuts assortment kit

2. Material: Made of superior 304 stainless steel, hard and durable, can prevent rust and corrosion

3. Package Include: Nuts and screws of different sizes of M3 M5 M5 510pcs total in a transparent box that are commonly used size, easy to use and install

☛1. Product Type: High precision black socket cap bolts screws.

☛2. Product Material: Made of 12.9 grade alloy steel, strong and durable, can resist rust and corrosion.

☛3. Package Include: Different size of m3 m4 m5 screws and nuts total 510Pcs in a clear box, which are commonly used size, easy to use and install.

Measures diameter, thread pitch & length of nuts, bolts & screws

Measures fractional bolts from size #4 to 1" up to 7" long

Measures metric bolts & screws from size 3mm to 22mm

Top Quality Nut, Bolt & Screw Gauge; For Use With Standard or Metric, Coarse & Fine Diameters, Lengths & Thread Pitches

This gauge has 'MarineBoltSupply' printed on the back

Package Dimensions: 8.75 inch L x 3.25 inch W x 0.25 inch H

This 128-piece bolt, nut and washer assortment includes a variety of long machine bolts, hex nuts, and split washers in popular sizes to handle a wide variety of projects.

Assortments are often used for maintenance, repairs, projects and manufacturing. They are great for home, office or business use.

The set comes in storage case for easy portability so you'll always have the right nut or bolt for the job. 

Kit Includes Hex Bolts, Hex nuts, Flat Washers and Lock Washers

Use for fastening metal, wood and plastic materials together, Includes sizes 1/4” 5/16” and 3/8”

A variety of sizes to suit your needs

80 pieces 1/4"-20 furniture screws threaded inserts for wood furniture. Comes with 9.0 mm white steel twist drill and 6mm hex spanner.

Internal thread insert type: 1/4"-20, it is not a metric nut, the thread inside the nut is different, match this type when selecting accessories

Material: High hardness and high quality carbon steel

🔩【Wide Application】 XOOL M3 Hex Socket Head Cap Screws Nuts are great for professionals, amateurs, landlords, handymen, repair men, women, woodworking, construction, plumbing, HVAC and so on. They also worked well for 3D printed projects. The kit is perfect to replace broken lost. Use on sheet metal and wood. XOOL M3 Kit is an ideal tool for home and workplace, too. A variety of sizes can meet the maximum of requirement for you.

🔩【High Quality】 XOOL M3 Hex Socket Head Cap Screws Nuts are made of high quality 304 stainless steel(Raw material). The 304 stainless steel material features strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using.

🔩【Safety and Sweet】 Our M3 cap head screw adopts high quality material, which is environmental protection and non-poisonous. In the process of using, there are no toxic substances releasing to ensure your safety. And we add an Allen Wrench on package to make working convenience for you.

STURDY, RELIABLE: Parts made of strong and durable stainless steel material

BEST-IN-CLASS CORROSION PROTECTION: Stainless steel provides superior protection against rust and corrosion; perfect for marine area applications

WHAT’S INSIDE: Each package contains 25 (1/4" x 1-1/2") hurricane bolts for applying panels to storefronts and sliding glass doors

【Nut & Bolt Thread Checker】 These thread gauges includes 26 male/female gauges - 14 inch & 12 metric.Thread sizes are permanently carved on each gauge with distinct mark, which makes the mark easy for you to tell.

【Efficiency Improving】Big Time Saver No more bent over the container looking for a nut/bolt to finish your project，especially the nut or bolt that cannot be removed，Each size has a nut and bolt checker on the same gauge， Excellent item for the mechanic Every workshop should have one.

【High Quality Material】 These nut & bolt thread checkers are made of strong material. Inch gauges are clear zinc plated, metric gauges are black oxide.

Inch and Metric & Coarse and Fine Threading

Measures fractional bolts from size #4 to 1" up to 7" long

Measures metric bolts & screws from size 3mm to 22mm

🔩 [Upgraded Thread Checking Set] Every thread checker is inserted into well cut foam that holds them firmly in place to prevent them from bouncing around in the box, but not so tight that you can easily remove them. Easier to use than connected nut/thread checkers, because you no longer have to carry a whole bunch of gauges to measure individual screws or nuts and can reach any tight spot.

🔩 [Lifesaver Before Heading to Hardware Store] Just screw the nut or bolt into the screw thread gauge, it takes you a few seconds to check the size. You do not need to drive forth and back to and from the hardware and auto parts stores for check any more. Also, this nut and bolt gauge is especially well suitable for the distinguish between similar inch and metric threads.

🔩 [Zinc Plated for Inch Size] Includes 14 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20.

Kit contains: 100 #2 Phillips, #10 x 1-Inch Screws, and 100 conical anchors

1/4-Inch masonry drill bit also included

Light-weight anchor holds screw securely in place

Nut & Bolt Thread Checker---with 44 male/female gauges,included 23 inch & 21 metric sizes,our product is the ideal solution to all your nut and bolt checking needs. the thread sizes are permanently stamped onto each gauge, making it easy to identify the right size for your project

Strong Stainless Steel Build---our thread detector set is made from high-quality stainless steel that can withstand heavy use and last for years. the strong build ensures that each gauge is sturdy and reliable, making it an essential tool for any workshop or diy enthusiast

21 Metric Sizes part number ---M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M14x2.0, M16x1.5, M16x2.0, M20x1.5, M20x2.5, M24x2.0, M24x3.0

♛【Package Includes】: Our 510pcs bolts and nuts assortment kit includes 120pcs hex bolts in 6 sizes: M4 x 16 x 20pcs, M4 x 20 x 20pcs, M4 x 25 x 20pcs, M5 x 20 x 20pcs, M5 x 25 x 20pcs, M6 x 20 x 20pcs; 130pcs hex nuts, 130pcs flat washers and 130pcs lock washers. This kit covers most common used sizes of M4 M5 M6 nuts, bolts and washers, very suitable for your different daily use. And they are sorted packed in a clear plastic box for easy storage and carry.

♛【Quality Material】: Our hex bolts, nuts and washers are made of high quality 304 stainless steel, which has good performance of rust-resistance, corrosion-resistance, anti-moisture, anti-oxidation and cold-resistance, can perform well even in bad environment, suitable for long-term using.

♛【2 Kinds of Washers】: Lock washers and flat washers are highly compatible with screws, nuts and bolts in multiple sizes and features a solid bearing surface to reduce pressure and friction, prevent leakage, isolate, loosening or disperse pressure.

Creative Hobbies ELYPACK - 28 Piece Lamp Repair Hardware Assortment Pack, Includes Pipe Nipples, Washers, Lock Nuts.

Great variety of 1/8IP parts to fit standard lamp pipe measuring 3/8 inch outside diameter.

Perfect for replacing, repairing or creating lamps and lighting products.

【 Perfect Inserts Nut Assortment Kit 】------ Threaded inserts for wood are used for pre-embedded connectors for wood furniture. Standard hex socket head, smooth & flat, features flanged thread texture, stable structure and easy installation.

【 Wide Application】------ Suitable for soft woods of pine, plywood, fiberboard, etc, work ferfectly on the furniture combination. Pieces Pack of Furniture Screws Threaded Inserts for Wood Furniture.

【 High Quality Material】 ------ High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design. Yellow zinc plated surface, anti-corrosion and anti-oxidation, with no burr and flanged anti-slip design, wear-resistant and very practical.

🚩HIGH QUALITY TO BE TRUSTWORTHY. 8.8 Grade Alloy Steel, corrosion resistance property, features good wear resistance, high hardness and high strength, can be used in extreme environments.

🚩MANY SPECIFICATION TO BE CHOSEN: M4*10mm,M4*16mm,M4*20mm,M4*25mm,M4*30mm,M5*16mm,M5*20mm,M5*25mm,M5*30mm,M6*16mm,M6*20mm,M6*30mm,M6*40mm,total 163 Set, Includes 13 Most Common Sizes.

🚩 STANDARD SIZE(Tolerance:±0.005mm): Uniform force, located in the center of the head with no offset, not easy to slip; Uniform pitch, obvious screw thread, no residual burrs, the set screw threads will be able to get a good grip. (Pitch Size: M4*0.7mm、M5*0.8mm、M6*1.0mm)

Nice Bundle: These thread gauges includes 26 male/female gauges - 14 inch & 12 metric. Each size has a nut and bolt checker on the same gauge. The individual gauges rotate freely on the wire cable for fast thread verification.

Efficiency Improving: No more bent over the container looking for a nut/bolt to finish your project. Identifying the size and thread of nuts and bolts before making trips to the hardware store to match them, especially the nut or bolt that cannot be removed.

Handy Tool Which You Should Have One: Excellent item for the mechanic; Applicable to mechanical repairs, or common threads in plumbing, air and gas connections, etc. Organize your garage and sort your nut & bolt with this nice tool, save your valuable time.

【✔】 High Quality Rivet Phillip Head Screws Dowel Barrel Nuts Assortment Set

【✔】 Head Type : Phillips Head, Material: Metal.

【✔】 Set Includes 7 Most Used Sizes, Size Include: M6 x 20mm / 30mm / 40mm / 50mm / 60mm / 70mm / 80mm, 【Please See Picture 2 for Specific Dimensional Size】

【Upgraded Bundle】This nut and bolt thread checker set includes 26 individual thread gauges - 14 inch size & 12 metric size. All gauges is inserted in a EVA holder and encased into a portable PVC case, which is water-proof and rust-proof. Provide better protection and never lose each single gauges. It also comes with a string which 26 gauges can be stung on if you like.

【More Flexibility】Just take a single gauge from the case to check the screw size simply. Easily to reach confined areas as you wish. No more cutting the awkward wire by yourself. No more twist the entire wire painfully to check a fixed bolt or a threaded hole, especially in a narrow corner or some tight spots.

【Easy to Read】Strong laser printed label on each individual bolt nut gauge. There are also one-to-one labels on EVA holder and sticker of case for easy reference and use. No more held it at a right angle in decent light to read the markings.

Nut and bolt thread checker: These bolt thread gauge includes 26 male/female gauges - 14 inch & 12 metric. Each size has a nut and bolt checker on the same gauge. Thread sizes are permanently carved on each bolt and nut size and thread gauge with distinct mark.

Clear zinc plated are inch gauges: Includes 14 Inch size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20.

Black oxide are metric gauges: Includes 12 metric sizes part numbers: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75.