Best Shyness in 2026

Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected).

It is suitable for digital and analog signals ( cannot be higher than VCC) and can be connected in either direction. To control this, the four digital outputs to the address pin of the chip (SO-S3) and send it the binary address of the channel.

Because the multiplexer can also process digital signals, you can it to TTL-level serial data to multiple devices through pipe or from multiple devices.

Versatile Digital Multimeter - Accurately measures AC/DC Current, AC/DC Voltage, Capacitance, Frequency, Duty Cycle, Resistance, Diode, Continuity and Temperature

Thoughtful Design - Support Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make the process of measurements easier. Professional level is reflected in some features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage

Suitable For Many Occasions - This Multimeter is a golden partner to help to troubleshoot a variety of automotive and household electrical problems safely and accurately.

VERSATILE DIGITAL MULTIMETER - Accurately measures AC/DC Voltage, DC Current, Resistance, and Diode. This Multimeter is a really useful tool for solving industrial and household electrical issues. Suitable for Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc.

TROUBLESHOOTING WITH Accuracy - This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.

ENSURES SAFETY - Double ceramic fuse is anti-burn and protects from overloading.The silicone cover is able to protect the multimeter from failing damage and prevent electric shocks. And low battery indication will be displayed when battery power is low.

Versatile Digital Clamp Meter: Accurately measures AC/DC Current, AC/DC Voltage, Capacitance, Frequency, Duty Cycle, Resistance, Diode, Continuity and Live Wire Tests. This clamp meter is a really useful tool for solving industrial and household electrical issues.

Non-contact Voltage Testing: This Clamp Meter features non-contact voltage testing with sound and light alarms. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a brief beep

Multifunctional & Easy to read: Support Data Hold, Max/Min, Auto power off after 15 minutes inactivity, low battery indicator and continuity buzzer. The LCD Backlit Screen and Flashlight make it easy to use in a dark working area. ZERO function decreases the data error influenced by the Earth’s magnetic field, and helps you to obtain a more accurate measurement.

Length of Shaft: 20mm/ 0.79in

5 pins

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx).

It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.

To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!

Function: Use 16 ADCs to collect 16 analog signals.

Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.

Analog output: DIG;Channel control: S0-S3

Wide analog input voltage range: ± 5 V

Logic level translation: to enable 5 V logic to communicate with ± 5 V analog signals

Output capability: non-standard

16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067

ON Resistance 70Ohms @ 4.5Vcc and 60Ohms @ 6VCC

2V to 6V operation

To achieve fast turn-on and off the circuit, an unlimited number of switching;

Conducting and cutting process does not produce noise, no spark, no electromagnetic interference;

Compared with electromagnetic relay products, longer life;

CD74HC4067 board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer, use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels; Analog output: DIG; Channel control: S0-S3

It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc.

The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).

74HC4051 to switch analog or digital signals

8 channels controlled by 3 select inputs

Wide voltage supply range: 2 – 10V Bipolar supply support (e.g., ±5V)

★This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.

★2V to 6V operation

★6ns break-before-make @ 4.5V,"On" resistance: 70 Ohms @ 4.5V

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.

Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.

IT can be used the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.

Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.

IT can be used the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.

Interface: I2C IIC

Chip: TCA9548A

Selectable I2C address: 0x70-0x77

The 74HC4051 is an 8-channel analog multiplexer/demultiplexer with 3 digital selects (S0-S2), one active low enable (E), and 8 independent inputs/outputs (Y0-Y7) ) and a common input / output (Z).

The 74HC4051 is an 8-channel analog multiplexer/demultiplexer with 3 digital selects (S0-S2), one active low enable (E), and 8 independent inputs/outputs (Y0-Y7) ) and a common input / output (Z).

When E is low, one of the 8 switches will be selected by S0-S2 (low-impedance state). When E is high, all switches enter a high-impedance state, directly ignoring S0-S2.

Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected).

It is suitable for digital and analog signals ( cannot be higher than VCC) and can be connected in either direction. To control this, the four digital outputs to the address pin of the chip (SO-S3) and send it the binary address of the channel.

Because the multiplexer can also process digital signals, you can it to TTL-level serial data to multiple devices through pipe or from multiple devices.

-Support 8 channels non-realtime video display with multiple display modes.

-Support 4 channels audio input and 1 channel audio output.

-Support digital zoom in/out. Support auto sequential switching.

you will get 6pcs 74HC4051 8 channel Analog Multiplexer Selector Module Multiplexers Distributor Resolver CJMCU-4051 For Arduino

The 74HC4051 is an 8-channel analog multiplexer/demultiplexer with 3 digital selects (S0-S2), one active low enable (E), and 8 independent inputs/outputs (Y0-Y7) ) and a common input / output (Z).

VCC and GND are the supply pins for the digital control terminals (S0-S2, E). The VCC to GND range of the 74HC4051 is 2.0V-10.0V.

-Support 4 channels realtime 1080P HD video display with multiple display modes.

-Support AHD, CVI, TVI or analog security cameras. PAL or NTSC TV system selectable.

-Support digital zoom in, zooming area is selectable.

LogicCircuitType: Mux/Demux; Family: MC1400; NumberofFunctions: 1;

SupplyVoltage-Nom(Vsup): 3 to 18 V; PowerDissipation(P)(W): 500 mW; PropagationDelay: 65 ns;

MaximumOperatingTemperature: -55 to +125 °C; Capacitance: 7.5 pF;

SignalType: Mux/Demux

ConfigurationMultiplexerDemultiplexer: 2 x 4:1

NumberofChannels: 8

LogicCircuitType: Mux/Demux; Family: MC1400; NumberofFunctions: 1;

SupplyVoltage-Nom(Vsup): 3 to 18 V; PowerDissipation(P)(W): 500 mW; PropagationDelay: 75 ns;

MaximumOperatingTemperature: -55 to +125 °C; Capacitance: 7.5 pF;

Wide analog input voltage range from -5 V to +5 V

ow ON resistance: 80 Ω (typical) at VCC - VEE = 4.5 V; 70 Ω (typical) at VCC - VEE = 6.0 V; 60 Ω (typical) at VCC - VEE = 9.0 V

Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals

The 74HC405 1 is an 8-channel analog multiplexer/multiplexer, with 3 digit selector ends (S0 to S2), 1 low effective enable end (E), 8 independent input/output, terminals (Y0 to Y7) and one common input/output terminal (Z).

As a digital multiplexer/multiplexer, VEE will be connected to GND, upper (usually ground).

VCC and GND are the power supply pins of the digital control end (S0 to S2, E), The VCC to GND range of 74HC4051 is 2.0V-10.0V 74HC4051 analog input/output (Y0 to Y7,Z oscillates between upper VCC and lower VEE, VCC VEE should not exceed 10V.

Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices.

This is a convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer.

It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, connect the four digital outputs to the address pin of the chip (SO-S3) and send it the binary address of the channel.

The 74HC4051 module is an 8-channel analog multiplexer/demultiplexer with 3 digital selects (S0-S2), one active low enable (E), and 8 independent inputs/outputs (Y0-Y7) ) and a common input / output (Z).

VCC and GND are the supply pins for the digital control terminals (S0-S2, E). The VCC to GND range of the 74HC4051 is 2.0V-10.0V.

When E is low, one of the 8 switches will be selected by S0-S2 (low-impedance state). When E is high, all switches enter a high-impedance state, directly ignoring S0-S2.

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx).

It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.

To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!