Best Skat Blast in 2026

Fits Model 730, 731, 780, SC-35V, SC-45V, SC-28, SC-28V, 850, 850-T, SC-34, 930, 935, 950, 951, 952, SC-40, SC-46, SC-58, 960, and 960-T Skat Blast Cabinets.

Cabinet Lens is 3/16" thick tempered glass.

Includes acrylic outer lens protector (.040 thick) and one inner lens protector.

Fits 12" x 24" Cabinet Lens (Note: Inner Lens Protector measures 10" x 21-3/4" and is smaller than Cabinet Lens). Fits Model 730, 731, 731-TL, SC-33, SC-33V, 780, 780-TL, 781, 800-T, SC-35V, SC-45V, SC-28, SC-28V, 850, 850-T, SC-34, 930, 935, 950, 951, 952, SC-40, SC-46, SC-58, 960, and 960-T Skat Blast Cabinets.

Attach to inside of tempered lens. When inner lens becomes scratched, peel it off and replace. Saves wear and replacement of the more expensive tempered lens.

Tech Tip: Always clean glass before applying. In some areas of the country, adhesive on inner lens can become less tacky from heat or extreme cold. If this should occur, use rubber cement from office supply store; and apply to inner lens prior to installing.

Keeps abrasive free of particles that can clog the nozzle.

If abrasive goes through the screen, it will go through the nozzle.

11-3/8" diameter, 1-3/4" high

Skat Blast siphon power guns have an air jet, which fits inside the end of the power head assembly directly behind the nozzle. Both the nozzle and air jet must be changed on a regular basis to keep your cabinet in good working order. Because the size of the air jet must match the size of the nozzle, we make this convenient combo pack.

Combo pack includes: 5 ceramic nozzles, 2 air jets, 2 air jet gaskets, and 1 nozzle gasket

Ceramic nozzles last up to 3 times longer than steel, about 6-8 hours per nozzle.

Skat Blast "High-Velocity" S-35 Series Power Gun is trigger operated and designed especially for siphon blasting. Can be used to improve performance with old-style S-25 Skat Blast Gun and other siphon-fed trigger cabinets. Sturdy and dependable, features include larger direct air passages for increased air volume and better suction. This results in a stronger, more powerful blast, so powerful, it is often mistaken for a pressure blaster.

Plus, ergonomic handle and full-hand trigger let you "feather" the blast for special applications or use "full blast" for heavy rust and paint removal. (More comfortable to hold and more durable than finger control type.) Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life; and has a case-hardened insert for better fit against back side of nozzle.

Stainless steel valve stem with a case-hardened steel valve stem guide make this gun the smoothest operating trigger gun on the market. Has 1/4" standard female pipe thread for your air inlet hose at bottom of handle. Your hose from pickup tube slips on power head. Accepts 5/8" ID siphon hose.

Fits 12" x 24" Cabinet Lens (Note: Inner Lens Protector measures 10" x 21-3/4" and is smaller than Cabinet Lens). For model 730, 731, 731-TL, SC-33, SC-33V, 780, 780-TL, 781, 800-T, SC-35V, SC-45V, SC-28, SC-28V, 850, 850-T, SC-34, 930, 935, 950, 951, 952, SC-40, SC-46, SC-58, 960, and 960-T Skat Blast Cabinets.

Attach to inside of tempered lens. When inner lens becomes scratched, peel it off and replace.

Saves wear and replacement of the more expensive tempered lens.

BIG 46"w, 28"d, 28"h work area! Overall abrasive blast cabinet size: 48"w, 30"d, 64-1/2"h. FULLY ASSEMBLED!

Includes: powerful Vac-55 HEPA Vacuum to remove dust as you blast; adjustable 90 watt floodlight assembly; 28" long double-strength cabinet gloves; and C-35 Foot-Pedal-Operated Power Gun

Strong 11-20 gauge USA steel construction: 11 gauge steel door with welded angle-iron framework, 20 gauge steel body.

BIG 58”w, 28"d, 28"h work area! Overall abrasive blast cabinet size: 60”w, 30"d, 64-1/2"h. FULLY ASSEMBLED!

Includes: powerful Vac-55 HEPA Vacuum to remove dust as you blast; 2 adjustable 90 watt floodlight assembly; 28" long double-strength cabinet gloves; and C-35 Foot—Pedal-Operated Power Gun

Strong 11-18 gauge USA steel construction: 11 gauge steel door with welded angle-iron framework, 18 gauge steel body.

Ceramic nozzles last up to 3 times longer than steel, about 6-8 hours per nozzle.

To save wear on the power gun, and for best overall results, replace nozzles and air jets promptly.

1-5/8"L, 1/2" dia.

Fit Skat Blast Cabinet Models 979 and up.

Made of long-wearing vinyl, with durable naugahyde gauntlets.

Coated twice for double the strength.

40”w, 28"d, 28"h work area! Overall abrasive blast cabinet size: 42”w, 30"d, 64-1/2"h. FULLY ASSEMBLED!

Includes: powerful Vac-55 HEPA Vacuum to remove dust as you blast; adjustable 90 watt floodlight assembly; 28" long double-strength cabinet gloves; and S-35 Trigger-Operated Power Gun

Strong 11-22 gauge USA steel construction: 11 gauge steel door with welded angle-iron framework, 22 gauge steel body.

Fits 12" x 45" Cabinet Lens (Note: Inner Lens Protector measures 10" x 42-3/4" and is smaller than Cabinet Lens). For Model 970, 970-DLX, 975, 976, 979, 9736, 1500, 1536, and 1936 Skat Blast Cabinets.

Attach to inside of tempered lens. When inner lens becomes scratched, peel it off and replace.

Saves wear and replacement of the more expensive tempered lens.

BIG 34”w, 28"d, 28"h work area! Overall abrasive blast cabinet size: 36”w, 30"d, 64-1/2"h. FULLY ASSEMBLED!

Includes: powerful Vac-55 HEPA Vacuum to remove dust as you blast; adjustable 90 watt floodlight assembly; 28" long double-strength cabinet gloves; and S-35 Trigger-Operated Power Gun

Strong 11-22 gauge USA steel construction: 11 gauge steel door with welded angle-iron framework, 22 gauge steel body.

72”w, 28"d, 28"h work area! Overall abrasive blast cabinet size: 74”w, 30"d, 64-1/2"h. FULLY ASSEMBLED!

Includes: powerful Vac-55 HEPA Vacuum to remove dust as you blast; TWO adjustable 90 watt floodlight assemblies; TWO pair 28" long double-strength cabinet gloves; and C-35 Foot-Pedal-Operated Power Gun

Strong 11-18 gauge USA steel construction: TWO 11 gauge steel doors with welded angle-iron framework, 18 gauge steel body.

The portable air compressor is proudly made in the USA with Global Materials in Jackson, Tennessee

PORTABLE: 6 gallon capacity maximizes portability and stored air for CRAFTSMAN air compressor

NO MAINTENANCE: Durable, oil-free pump of the 6 gallon air compressor is made for long-life and no maintenance

WHY SQUAT: Squats are not only effective for building an insanely strong lower body, but also because they deliver a number of ancillary physical benefits, including increased hormone release and improved flexibility.

HOW IT WORKS: Tone the lower body by using your glutes, quads, and hamstrings to push down to a squat. Work your shoulders, back, and chest as you push yourself up through every rep. Skip the weights, this squat trainer will reduce the amount of stress on the knees and joints that occurs when you squat incorrectly. Adding this to your workout will help you develop a proper form to get the perfect squat.

TRACK YOUR FITNESS: The LCD monitor tracks your calories, scan, time, and count. This trainer gives you the freedom to add or remove tension, the three elastic bands can be clipped on or off the seat to adjust to any fitness level.

The product is easy to use

The product is durable

The product is manufactured in Taiwan

OIL FREE: Requires no daily maintenance and eliminates risk of oil stains on work surfaces

LIGHTWEIGHT: 29 pound weight and narrow tank diameter make unit easy to carry/store

HIGH FLOW REGULATOR AND DUAL COUPLERS: Maximizes air tool performance

Comes complete with Wheel Kit & Air Filter | No hose included | Consider you will need a ¼” Universal / Industrial Male Quick Connector to attach your hose to the air compressor

Product dimensions – 26" L x 14" W x 23” H | Max Pressure – 120 PSI | Voltage – 110V / 60 Hz | Min running watts – 2500 | Noise level – 60 dBA | Max Continuous run time – 30-60 min (depending on PSI & CFM) | Low Amp Draw – 8.5 Amps

Oil-Free Pump for Less Maintenance & Costs | Powerful 1.0 HP (Rated / Running) 2.0 HP (Peak) Motor

Convert Standard Holesaws for Use with Power-Change Adapters

Extension Adapter Pack contains adapters to provide standard holesaws compatibility with Bosch's power-change system

Adapter for competitors’ holesaws, such as Starrett, Baco and Lenox, among others

OUTSTANDING VALUE & INVESTMENT - Backyard or woodlot firewood is a money-saving, reliable, and renewable heat source, and the LogOX makes harvesting easier, while quickly paying for itself. Its ergonomic, versatile design combines 3 essential forestry hand tools into one time and energy-saving portable package at an exceptional value. The compact Forester Package includes all of the great LogOX hand tools and accessories you'll need for faster, safer, and easier tree work.

Patented & Made in USA, the LOGOX 3-IN-1 FORESTRY MULTITOOL is a versatile, back-saving ergonomic innovation in forestry hand tools, which combines the LogOX Hauler, 21” cant hook, 40" cant hook, and 40” timberjack, in one compact tool.

PICKOX ATTACHMENT – Add to the 3-in-1’s Cant Handle Extension, and turn your LogOX into a 4-in-1 tool. This pocket-sized pickaroon attachment easy picks up split wood pieces, without bending over, safely dislodges stuck log rounds from a wood processor, or pulls wood from the back of a truck or wagon.

Long-lasting power, rapid charging and durability in all weather conditions

Unique arc design and Keep-Cool battery technology keep each cell cool for long life and hard work in the most extreme conditions

Integrated fuel gauge to let you know how much power is left in your battery

DESIGN: These Universal Joints have mirror polish chrome finish to resist corrosion. Spring-loaded detent balls securely latch and notches in drive ends lock onto ratchets and extensions. This high quality set comes with a re-usable aluminum storage rail so you'll never loose a universal joint on the job!

DURABLE CONSTRUCTION: Made from high-strength, premium chrome vanadium steel, these universal joints meet and exceed ANSI/ASME standards. If you need Universal Joints for impact use please use ARES 70073.

MUST HAVE: The swivel is a must have for any true do it your-selfer or mechanic. As you know some situations you just can't get straight on and this will make your life easier.

INCLUDES: This 3-Piece Spring Loaded Universal Joint set includes 1/4, 3/8, and 1/2-inch Drive U-Joints that feature a unique spring loaded design for easier one-handed operation and positioning on fasteners. This set comes packed in an EVA foam tray for convenient storage and organization.

DESIGN: These Spring Loaded Universal Joints feature a unique spring loaded design that prevents the u-joint from falling to the side during use. Made from high-strength, premium Chrome Vanadium steel and with a chrome plated finish for corrosion resistance, these universal joints feature knurling on the collar for enhanced grip and meet or exceed ANSI standards.

APPLICATION: Thanks to these universal joints’ spring-loaded design, this set offers superior flexibility while working. The spring-loaded joint stays in position securely without falling to one side or the other, eliminating the need to hold the U-joint in place and allowing for one-handed operation. The included storage tray fits in workbench trays and tool drawers, making organization simple. *NOTE: U-joints not for use with impact tools*

4 1/2" diameter handwheel, fits 1/2" shaft. Used on the blade elevation and tilt shafts.

Fits Craftsman 113.xxxxxx model series belt drive contractor saws with 1/2" diameter shafts.

Replaces Sears Part Numbers: 818526, 62689, 820452, & 806872

The AI303 Air Compressor Water Separator filters out contaminants through the reusable 1 micron filter element, which is easily flushed out through the push button drain valve.

Compared to other Air Compressor Filters, the LE LEMATEC AI303 provides a broad operating PSI range of 2-150 PSI with little to no lost pressure so you get the desired pressure delivered to your air tools.

The air dryer for compressors. features a one way valve protecting air tools from dangerous backflow keeping your equipment in perfect working order.

Features a total of 48 pockets

Offers up to 5x greater durability

Durable Canvas construction

This robust and uniquely designed Self Centering Pen Drilling Vise keeps your pen blanks secured. The jaws are parallel to one another and remain square to your drill press table to ensure accuracy. The jaws can open wide enough for wider bottle stopper blanks as well. The Savannah Self Centering Drill Press Vise also includes three sacrificial MDF Plates to slide underneath the blanks to protect the vise base when drilling through blank.

This vise can also be used to drill Both Stopper Blanks!

Vise will accept blanks up to 2-1/8" diagonally or up to 1-1/2" square.

WHAT YOU GET-Single Scoring Wheel Tip,Double Scoring Wheel Tip and QuickSwap Drive Housing.

HIGH QUALITY AND DURABLE-This Scoring Wheels are made of premium carbide steel not easy to rust.

WIDELY USED-Single Scoring Wheel perfect for extra-deep score lines,and suitable for uncoated, light materials, including crepe paper, light cardstock.Also for tags, cards, and gift boxes and acetate.Double Scoring Wheel creates two deep,perfect for for coated or heavier materials like poster board and cardboard.

Fits Model 730, 731, 780, SC-35V, SC-45V, SC-28, SC-28V, 850, 850-T, SC-34, 930, 935, 950, 951, 952, SC-40, SC-46, SC-58, 960, and 960-T Skat Blast Cabinets.

Cabinet Lens is 3/16" thick tempered glass.

Includes acrylic outer lens protector (.040 thick) and one inner lens protector.