Best Stock-Tek in 2026

Ambidextrous for both right and left hand people

Simple installation with drilling templates included

Lightweight and very durable

Mil-spec hard anodized 6061 T-6 aluminum

Stainless steel internals

Spring-tensioned legs stow neatly forward and snap down

NEW LOOK FOR YOUR GUN - Birchwood Casey gun stock finish has unique blend of linseed and natural oils dries fast and will not cloud, yellow or crack with age. It fulfills everything you need to finish a new stock or to refinish an old stock

RICH EVEN COLOR - Brings out the richness and beauty of fine woods gives you a tough, long-lasting finish. Resists water damage and will not cloud, yellow, or crack, unique blend of linseed and natural oils dries fast and will not cloud

EASY TO APPLY - Use a clean cloth or wood stain brush to apply the oil in the direction of the grain. The special formula allows it to deeply penetrate wood pores within 5 minutes of application and create rich, warm glow

Classic structured, mid-crown, trucker-style hat with a six-panel design for comfort and durability

Embroidered patch at center front

Mesh back for better breathability

【High Quality Material】AR Rifle wall mount is Made of high-quality PA Plastic injection-molded strong enough to hold your gun and can withstand up to 300lbs of tension without breaking.

【Unique Low Profile Design】Sleek surface with frosting treatment, ensuring that your device will not be scratched. and not only can be compatible with ar-15, but also hold up 1 PMAG.

【Easy to Use & Install】Just drive the screws into the wall through the hole of the wall mount, precise, snug fit the gun.

Baktrak rubber gripping dots reduce slippage and sling related noise

Flexible sling face keeps it from twisting

One hand, quick adjusting

SPECS: Weighs 8.5 lbs with a 13 inch diameter base

EASE OF USE: Fingertip elevation adjustment

CONVENIENT: Built-in carrying handle

Utilizes the latest technology in injection molding for signification weight reduction while still retaining the functionality, strength and value of our other bipods; At 8 ounces, it weighs almost 40% less than our other bipods while still providing a dependable, stable platform to shoot from

Designed to mount to the popular Uncle Mike's Sling Swivel Stud, attaching and detaching the MOE bipod is quick and easy with its rapid-attach sling stud mounting system; Self-locating, stainless steel clasps ensure perfect alignment when mounting, and the large ergonomic thumbwheel allows for a strong grip and easy tightening

Non-marring overmolded saddle was made to fit securely across a range of stock sizes, providing ideal load distribution without leaving a mark; Adding an optional low-profile sling stud on the rear of the mount retains the ability to mount a sling

Compatible with Ruger American short action rifles; Requires no bedding and is a true fixed stock "drop-in" solution

Reinforced polymer construction with Type III Hard anodized, machine finished cast aluminum bedding block; High strength steel recoil lugs

Compatible with barrel profiles up to medium palma

The most trusted source for your shooting supplies

Tested for quality and durability

Made using the highest quality materials and components

Made from reinforced polymer and an anodized aluminum bedding block; Offers users a cost effective fixed stock replacement featuring enhanced ergonomics

Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user (Fits right-hand receivers only); M-LOK compatible to accept a broad range of accessories

Compatible with our Bolt Action Mag Well 700 which allows the rifle to be used with detachable AICS-spec box mags without the need for custom inletting

Made from reinforced polymer and an anodized aluminium bedding block; Offers users a cost effective fixed stock replacement featuring enhanced ergonomics

Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user (Fits right-hand receivers only); M-LOK compatible to accept a broad range of accessories

Compatible with our Bolt Action Mag Well 700 which allows the rifle to be used with detachable AICS-spec box mags without the need for custom inletting

Weatherproof and non-slip

Soft recoil cushioning buttpad

Ambidextrous palm swell

The Hunter Specialties Butt Stock Shell Holder Rifle is Superior Design and innovation

Made to aid in game hunting

Designed to be easy to carry and use

Fills the pores of wood stock

Seals out moisture

Quick drying, easy to apply

Stud Mount Precision Machined from Aircraft Grade Aluminum with Matte Sand Hard Coat Anodize.

Can be fixed to Swivels 1.0, 1.25, 1.5 Inch for convenience connection with Stud design.

Provide T-nuts, screws and assembly allen key for installation easily.

Adjustable Desgin: There are 4 settings on the Pic rail mount and the spring detent adjustment is very handy which allows you to easily adjust the distance of the brass catcher to the ejection port.

Low Profile & Quickly Detachable: The mounting piece that goes on the picatinny rail is very low profile and fits easily under the scope. The quick disconnect is easy to use and manipulate.

Quality Construction: The thickened nylon ensures it will not melt when ejected. There is a zipper in the bottom of the bag so you can empty it without removing the catcher from your rifle.

Universal Size: Qd sling swivel with 1.25 inch loop. Suitable for slings up to 1.25 inches wide

for two point sling mounts for mlock two point traditional slings, and it can be rotated 360 degrees.

Heavy-Duty S-ling Swivel made from high-strength steel, standard adaptor machined from aircraft grade aluminum with matte black hard coat anodize.

Material: Made of Carbon steel. Durable, anti-rust and large loading capacity of 200 pounds

Application: Standard sling adapter hole, suitable for all standard sling swivels and bipods

Operation: Easy to install to your rifle or shotgun.

Package Dimensions: 8.636 L x 43.18H x26.416W(centimeters)

Country of Origin: China

No batteries required

Long lasting and built for the outdoors

Hoppe's No. 9 wax treated gun cloth is a pre-treated cloth that cleans, polishes and protects in a single application

With this cloth, you can achieve a polished, professional finish on wooden stocks

Made from reinforced polymer and an anodized aluminum bedding block; Offers users a cost effective replacement fixed stock featuring enhanced ergonomics

Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true “drop-in” solution for the end user (Fits right-hand receivers only); M-LOK compatible to accept a broad range of accessories

Compatible with our Bolt Action Mag Well 700L which allows the rifle to be used with detachable AICS-spec box mags without the need for custom inletting

【DURABLE MATERIAL】 : Made of 1 1/4 inch double nylon webbing, durable.Material is wear resistant, easy to maintain .

【HEAVY METAL D-RING】 : The heavy duty metal D ring which is more durable than others, fits most sling hooks .

【ADJUSTABLE LENGTH 】: The strap total length is 16 inches , no need to use any tools, simple installation and easy adjust, won't scratch your gear.

Rugged Gear 10055 Single Gun Rack Screw-attach Hardware Incl

Rugged Gear

fits Remington 870 OverRubber Shotgun Stock - 12" L.O.P.

Hogue Remington

Scrimshaw P

✅ 【Adjustable & Extra Long 2 Point Black Sling】The 1.5 inch wide sling designed with extra-long adjustable length and with double-end elastic cords, the min length 47" to max length 78.8", can suits for any different users. Strap length of the sling can be easily adjusted by 4 thumb buckles, extra long adjustable strap and strong elastic cord creates wide length variability for the two points sling.

✅ 【Upgraded Sling Metal Hooks & Multipurpose】New improved larger metal snap hooks for more easily to connect and remove, which can fit any 2 point sling attachment points, don't worry about it too small.

✅ 【Unique Mlok Sling Swivel Mounts】The qd sling swivels with 1.25" loop can be simply pushed button to quickly detach and attach to our two point slings. the mount base uses 8 different point position rotation locked design, makes it enough durable and stable, perfect installation to standard mlok system slots.

Minimum weight and bulk with reinforced polymer construction

Cheek weld combines a slim profile with user comfort

Optional snap on Cheek Risers are available for use with optics; Internal storage compartment optimized for factory cleaning kit

Nucleus integrated optics platform engineered to reduce scope movement and vibration, preserving its zero shot after shot

TNT (Turbo Nitrogen Technology) power system

Enhanced SilencAir 5-chamber noise dampener that is permanently affixed to the air rifle and reduces down range muzzle noise (NOT included on Forge 490)

The buttstock adapter is made out of 1.25 inch durable military nylon webbing with Velcro grip at the ends. Material is wear resistant, easy to maintain and clean and almost impossible to break in normal use. Includes a heavy duty metal D ring to clip your sling nicely.

The strap length is 16 inch and you can easily adjust it to fit your buttstock. Allows you to directly attach your sling without using a mount or swivel that may scratch your gear.

The strap has velcro grip material toward the end so the remaining strap will not stay loose and disturb you after you fix it. The remaining strap will instead grip nicely with the velcro and stay tight.

【Large Ejection Space】 This CVLIFE brass catcher come with two iron frame. The two iron frames would keep more space for the brass ejected, even if the brass mesh during with a large weight.

【Fixed Firmly】 The tacti net brass catcher with a narrow iron frame, which is more firmly fixed on the rail and will not slide easily due to recoil.

【Quick Installation】 This especially Ar shell catcher with velcro strap design and soft nylon hook is convenient and quick to install on the rail.