Best Streetside Tools in 2026

This tool will remove the Low/ Reverse clutch piston in the rear of the case.

Makes removing the clutch spring retainer easy.

The whole process takes just a few minutes.

Made in the USA!

This tool helps with rebuilding GM Front Pumps to make sure the Pump Cover is aligned with the Pump Body.

Our heavy duty all-metal Alignment Bands are constructed of Stainless Steel for accurate alignment and long life.

Made in the USA!

Bench Mounts w/ included base. Full 360 degree swing.

Dual tightening handles for a secure hold. All Steel Construction.

Made in the USA!

Prevents distortion during installation.

This one tool will seat all 4 ring seals.

Provides the easy removal and installation of the manual shaft (shift lever) seal.

Draining of the transmission fluid is not required.

The whole process takes just a few minutes.

SST-1503 - GM - Stator Shaft Teflon Seal Installer / Resizer Transmission Tool [4L60-E]

This 12 piece bushing driver kit is for the 700R4 (700-R4) (4L60) (4L60E) (4L65E) transmissions.

Bushing Driver Handle Included

Includes 12 Bushing Drivers and one Driver Handle.

Made in the USA!

This tool helps with rebuilding GM 4L80E Front Pump to make sure the Pump Cover is aligned with the Pump Body.

Our heavy duty all-metal Alignment Bands are constructed of Stainless Steel for accurate alignment and long life.

Provides the easy removal and installation of the manual shaft (shift lever) seal.

Draining of the transmission fluid is not required.

The whole process takes just a few minutes.

Made in the USA!

New Required Tool!

They are epoxied on by Ford, so the nut must be heated before using this tool.

Made in the USA!

Easy removal and installation of the extension housing bushing, without removing the extension housing.

For use on these Transmissions: GM 350, 180, 200, 200-4R, GM Borg-Warner T5 ( Tremtec T-5 )( World-Class T-5 )

[Multi-functional Tool]: A multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck; which is perfect for completing skateboard assembly

[All-in-One Design]: The all in one skate tool has everything you need to tighten up or repair your skateboard. This skate tool works with all types of the skateboards,penny board and long boards, it can help change wheels, clean your bearing

[Anti-Loss Structure]: The skateboard T tool includes 3 different sizes of sockets(3/8", 1/2", 9/16") and a slide-out Phillips head wrench screwdriver that fits into the top of the handle when not in use

[Multi-functional Tool]: A multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck; which is perfect for completing skateboard assembly

[All-in-One Design]: The all in one skate tool has everything you need to tighten up or repair your skateboard. This skate tool works with all types of the skateboards, penny board and long boards, it can help change wheels, clean your bearing

[Anti-Loss Structure]: The skateboard T tool includes 3 different sizes of sockets (3/8", 1/2", 9/16") and a slide-out Phillips head wrench screwdriver that fits into the top of the handle when not in use

[Multi-functional Tool]: A multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck; which is perfect for completing skateboard assembly

[All-in-One Design]: The all in one skate tool has everything you need to tighten up or repair your skateboard. This skate tool works with all types of the skateboards, penny board and long boards, it can help change wheels, clean your bearing

[Anti-Loss Structure]: The skateboard T tool includes 3 different sizes of sockets (3/8", 1/2", 9/16") and a slide-out Phillips head wrench screwdriver that fits into the top of the handle when not in use

The most advanced and precision fret end dressing file available - designed from the ground up specifically for fret ends - this is your most effective weapon in the battle against sharp fret ends, " fret sprout ", and a must-have for a smoother, faster playing guitar that inspires you to play more often.

Precision flat ground, diamond honed and polished bottom - so the file glides across your fingerboard without scuffing the wood, finish or binding. We've teamed up with one of Europe's oldest and most respected file makers to help us create this finely crafted file, then we put the finishing touches and final diamond hone and polish here in our shop. Definitely NOT made in China.

Top of file has a smooth, safe ground edge, and the upper corners and tip are completely rounded and beveled to prevent damage to your fretboard and guitar. Also comes with a top quality, made in USA hardwood handle that feels comfortable in your hand, and takes the pain out of working on your frets.

Precise string action gauge in .010" (ten thousandths of an inch) number increments, and .005" line increments = super accurate guitar setup! The markings are NOT printed - they are actually laser etched through the black surface, deeply into the stainless metal. No printing to rub off! Also check out the new, precision 64ths string action gauge. The accuracy of the FretGuru 2 will bring your guitar out of the realm of woodworking and into another world of playability.

Unique, first of it's kind fret height/fret wear gauge in .005" increments. No more fumbling with calipers, straightedges or feeler gauges.

Fret rocker! The 3 unequal length sides are CNC machined, precision diamond honed and polished. Now you can find that pesky high fret without scratching your frets.

Faster Cut, Smoother Finish - The Dagger’s exclusive D.I.A. (Dual Integrated Arc) design gives you greater cutting control, perfect fret centerlines and a finer fret finish. It’s sharp enough to quickly bring the sides of the fret up to a clearly defined center, without worrying about accidentally taking too much off the top. Some of our customers have even called it foolproof.

Prevent Damage to Your Frets and Fretboard - with the Dagger’s exclusive smooth beveled, contoured edges. The angled cutting surfaces and ergonomic handle are balanced and comfortable, helping to reduce hand fatigue, and also preventing damage to your guitar body by allowing maximum file and finger clearance over the guitar body, switches and pots as you move up your guitar neck. In most cases there’s no need to mask off your fingerboard.

Avoid School Bus Roof Shaped Frets and Their Tone Destroying Effects - Precisely leveled and crowned frets are the very foundation of a great sounding guitar. Worn, grooved, flattened frets will rob you of tone, volume, while doing a number on intonation. Our professional grade crowning file was created with file masters in the heart of Europe to fix these issues. Made from high carbon European tool steel with razor-sharp teeth to deliver a clean, ready-to-be-polished cut every time.

Perfect for adjusting round screws

100% stainless steel combined with precision cut teeth

Soft suede microfiber backing keeps the metal off your gear

✔ Practical Needle Felting Kit: Including 30pcs 3.58" felting needles, 30pcs 3.39" felting needles, 30pcs 3.07" felting needles, 3pcs black clear bottles, 2 pcs wooden felting tool for meeting all of your needs for wool felting. Our felting needles and accessories are suitable for beginners and professionals, and three different models are suitable for different stages of making wool felt.

✔ Good Assistance for Your DIY Work: These Wool Felting Supplies including three kinds of needle size for satisfy your needs in making different small animals, dolls, toys and other craft job. And three black bottles hold the felted wool needle separately according to the needle size,convenient and avoid losing. And the model number is affixed to the bottle, so you can recognize the one you want to use at a glance.

✔ Superior Material Ensure Long Time Use: Our needle felting tools kit are made of superior metal and wood ,durable and ensure long time use.The wooden wool felting tool is free to replace all sizes of needles,very easy to use! The thick needle is suitable for the primary fast stab felting stage, the middle needle is suitable for the fixed shape stage, and the fine needle is suitable for the fine processing stage.

1. [Multi-functional Tool]: The multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck to loosen or tighten your trucks for better control; which is perfect for completing skateboard assembly.

2. [All-in-One Design]: The all in one skate tools has everything you need to tighten up or repair your skateboard. This KVENI skate T tool is universal that can be used for repairing, tightening, or reassembling with all types of the skateboards, penny board, long boards, standard skateboard, bike, scooter, cruiser and more.

3. [Innovative Structure]: The T skateboard tool includes 3 different of size sockets: 1/2” for wheels, 3/8” for hardware, 9/16” for trucks, a slide-out Phillips head wrench screwdriver fits into the top of the tool, when not in use.

Package includes 1 x T-tool and 1 x Y-tool

All-in-one tool: has everything you need,suitable for most skateboard assembly, you can use it to adjust axle nuts, mounting hardware and so on

Compact:lightweight and portable,easy transport and storage,you can use it everywhere when you need

Package Dimensions: 16.8 cms (L) x 6.4 cms (W) x 16.8 cms (H)

Product Type: Instrument Parts And Accessories

Package Quantity: 1

1. [Multi-functional Tool]: The multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck to loosen or tighten your trucks for better control; which is perfect for completing skateboard assembly.

2. [All-in-One Design]: The all in one skate tools has everything you need to tighten up or repair your skateboard. This KVENI skate T tool is universal that can be used for repairing, tightening, or reassembling with all types of the skateboards, penny board, long boards, standard skateboard, bike, scooter, cruiser and more.

3. [Innovative Structure]: The T skateboard tool includes 3 different of size sockets: 1/2” for wheels, 3/8” for hardware, 9/16” for trucks, a slide-out Phillips head wrench screwdriver fits into the top of the tool, when not in use.

Perform and record clean lines without unwanted string noise.

Easy to use, no tools or special installation required.

Works for guitars, basses, and other stringed instruments.

11 essential guitar setup tools. It is so compact that you can carry the MTZ11 in your pocket

The convenient center holes in the MTZ11's Body make it easy to access any tool you need

The wrench sizes are written clearly on the body for instant access and use

Perform and record clean lines without unwanted string noise.

Easy to use, no tools or special installation required.

Works for guitars, basses, and other stringed instruments.

Perform and record clean lines without unwanted string noise

Easy to use, no tools or special installation required

Works for guitars, basses, and other stringed instruments

Quilling Tools:Our quilling tools are made of plastic and stainless steel, which is sturdy and rust-proof , also it features durable that would not easy to be deformed.

Beautiful Colors: Quilling pens are in different color and light weight to use ,which is easy to carry and not take up too much space in the bag.

Practical Tool:The quilling pens make it easier to twirl paper and are much more comfortable to hold, can help to apply adhesive glue evenly,for thick paper and several glued strips, stretched out a variety of shapes.

9/16 Inch Socket - easily tighten or loosen your trucks

Adjustable hoof stand and cradle

Hoof stand, cradle and post