Best Syt in 2026

Solid Carbide spiral router bits up and down cut with 1/4" shank and 1/8" cutting diameter, 1/2" cutting length, 2 inch for total length

The CNC Router Bit for Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothy up&down cut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits

This bit has a cutting diameter of 1" and a cutting length of 1-1/8". Perfect for making dado grooves and all types of straight cut work. 1/4" shank

Can be used on CNC and other automatic routers as well as hand held and table mounted portable routers, Such as woodworking engraving machine, trimming machine, CNC hand-held, table-mounted router, etc

Smoothly radius edge requires little or no sanding before applying finish, Creates smoothly radius edges on boards and panels

Premium Carbide

60° & 90° V groove

15° Detail carving liner

Specs: Number of Cutters 2, Overall Dia. 1-1/2", Overall Length 3", Shank Dia. 1/2", Carbide Height 1-1/4"

Freud Tico Hi-Density Carbide

Clean cuts in solid wood, plywood and composites

Specs: Number of Cutters 2, Overall Dia. 3/4", Overall Length 2-3/32", Shank Dia. 1/2", Carbide Height 3/8"

Down shear design on most bits for clean top surfaces

Deep center gullets for fast chip removal

Specs: Bearing Dia. 1/2", Number of Cutters 2, Overall Dia. 1/2", Overall Length 3-5/8", Shank Dia. 1/2", Carbide Height 1-1/2"

Cuts all composition materials, plywoods, hardwoods, and softwoods

Use on hand-held or table-mounted routers

Solid Carbide spiral upcut router bits with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length

The CNC Router Bits is suitable for Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits

(D) Diameter: 1/16

(R) Radius: 1/32

(a°) Angle: 5.4°

SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action yields a clean accurate cut while the augering action clears chips from the cut.

FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits.

CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate, Melamine, Melamine Particle Board, MDF, Veneered Plywood.

Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits

DETAIL SIZE. 1/2 inch shank, 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch overall length

MATERIAL FIT. This router bit is perfectly used for Plywood, OAK, MDF, and any hardwood working(profile cutting), those composites kind material

SPECIAL DESIGN. The UP&Down spiral router bit clean edge on both top and bottom face, design to cut material at full depth in one pass,better than straight bits

Cutting depth 1/8 to 1/2-Inch by replacing bearing, 1-3/8-Inch Diameter & 3/4-Inch Cutting Length.

For rabbeting of different size on wood and wood composites.

Anti-kickback design.

Whiteside Router Bits are made with Premium Carbide

Precision ground for proper balance at high RPM

Industrial Quality

Whiteside Router Bits are made with Premium Carbide

Precision ground for proper balance at high RPM

Industrial Quality

Whiteside Router Bits are made with Premium Carbide

Precision ground for proper balance at high RPM

Industrial Quality

RU1600

Up Cut Spiral

Industrial Quality

RD2100

Down Cut Spiral

Industrial Quality

Specs: Number of Cutters 2, Overall Dia. 3/8", Overall Length 3", Shank Dia. 1/2", Carbide Height 1-1/4"

Fast chip removal with excellent quality and long life

Use in CNC, hand-held and table-mounted routers

Turn your rotary tool into a powerful cutting machine

Ideal for cutting drywall for electrical boxes, air vents and other wall features

Piloted tip to cut around outlet and switch boxes

Tapered angle Ball Nose End Mill / Cone Cutters

1/4Inch Shank Diameter, 2 Flutes, H-Si Coated

Tip Diamter: 1.0mm, Radius: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg

Specs: Bearing Dia. 1/2", Number of Cutters 2, Overall Dia. 1/2", Overall Length 4-3/8", Shank Dia. 1/2", Carbide Height 2"

Cuts all composition materials, plywoods, hardwoods, and softwoods

Use on hand-held or table-mounted routers

Specs: Shank Dia. 1/2"

Sets include bits that match the true thickness of 1/4", 3/8", 1/2" and 3/4" plywood

Routs hardwood, softwood, plywood or composites

Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits

(D) diameter: 1/4

(R) radius: 1/8

(A°) angle: 0.10°

RANGE OF PROCESSING: For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing, etc

DIMENSIONS: Shank Dia=1/8" (3.175mm). Cutting edge diameter=1/8" (3.175mm). Cutting edge length/flute length=17mm. Overall length=38.5mm

HIGH EFFICIENCY: These bits own sharp edge which is able for fast engraving that makes high efficiency, durable, high precision and not easy to break. It is smokeless and burr-free while processing

Solid carbide spiral ball nose tapered router bit

2 flute, 1/4" shank, 1-1/4" cutting length, 2.0mm tip diameter, 3.92Deg, TiAlN coating, 55HRC

Mostly used for 2D/3D engraving work, detail carving

Solid carbide spiral ball nose tapered router bit

2 flute, 1/4" shank, 1-1/4" cutting length, 1.5mm tip diameter, 4.36Deg, TiAlN coating, 55HRC

Mostly used for 2D/3D engraving work, detail carving

Specs: Number of Cutters 2, Overall Dia. 1/8", Overall Length 1-3/4", Shank Dia. 1/4", Carbide Height 3/8"

Black I.C.E. coating for cool cutting edge and superior chip evacuation

Black I.C.E. + Freud TiCo Hi-Density Carbide = 2X increased life and performance vs. standard uncoated bits

Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits

Solid Carbide up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits