Best Tektall in 2026

【Top Quality】 Tektall plasma cutter guide is made of very solid Anti-High-temperature premium material. Well-Machined, Great Tolerance.

【Fitment】 Brand new aftermarket Cutter Guide Wheel Replace for Panasonic 80A-100A Cutting Torch P-80 Panasonic.

【Specification】 Rated welding current: 100A, Max Cutting thickness: 40mm, Bottem inner diameter: Approx 33.5mm.Top inner diameter: Approx 35.5mm.

【Made from Brass】 Tektall Drift Punch Set made from brass for non-sparking applications critical in hazardous conditions.

【Used for Non-marring Applications】 Brass tools will not marr components that are harder than the tool itself.In cases where appearance is important, brass tools are recommended.

【Knurled Design Handles】 Handles have a knurled grip for a more secure grasp of the tool.

【High Performance】 Made of excellent resistant materials, which is wear-resistant and corrosion-resistant.It is not easily deformed after long-term use and can withstand high and low temperatures.Prevent damage to suspension components, such as collisions or control arms.

【Replaces Part Number】 Front control arm bumper # - 15153958, 905-208 ； Rear axle bumper # - 15039397.

【Fitment】 Tektall Control Arm Bumpers + Control Rear Axle Bumpers Fits for 2002-2006 Cadillac Escalade，1999-2006 Chevrolet Silverado, Sierra, 2000-2006 Tahoe Suburban, Yukon, 2002-2006 Avalanche Express, 2003-2014 Savana, 2002-2006 Cadillac Escalade.

Top premium-quality, ethanol-resistant, Made of Alloy, Well CNC Machined, Accurate, Good finishing, Great throttle Valve, Float, Standard Jets Kit installed, Each of them is tested again and and again to ensure the Durability and the reliability.

Brand new Tektall aftermarket Carburetor Replace for Mikuni HSR42mm HSR TM42-6 42mm bore carburetor

Brand new Tektall aftermarket Carburetor Replace for Harley Evo Evolution Twin Cam Motorcycle with HSR 40mm bore carburetor

【What is Exhaust Muffler】 This exhaust muffler is universal part.Made of stainless steel and is durable,Straight-through muffler design reduces back pressure while absorbing sound waves, Better air flow design, Improves exhaust velocity performance.

【What can you do with it】 Tektall burnt muffler tailpipe exhaust can not only prevent the deformation of the car exhaust pipe, but also play the role of supercharging and turbulence.Helps absorbing sound and producing a low,deep tone.Burnt muffler has a burnt blue tip that adds an aesthetic focal point to the rear of the vehicle, make your vehicle look cooler,Your car will definitely stand out from the crowd.

【Universal accessories】 Polished stainless steel,3 inch inside diameter inlet, 4 inch outlet, 18.5 inch overall length. (NOTE:Universal muffler fit 3" OD pipe, but will not fit 3" ID pipe. You can choose Butt joint, Lap joint, or muffler seal clamp, U bolt clamp. Please measure the OD of your exhaust pipe and you have enough space to install before ordering.)

【Fitment】 Engine camshaft hydraulic roller lift cam is fits for GM C.hevy 1997-2007 LS L92 L99 5.3L 5.7L 6.0L 6.2L V8 LSx Sloppy Stage 2. Note: ls camshaft is not compatible with Active Fuel Management (AFM) engine. Stock valve springs cannot be used.

【Top Quality】 Made of high-quality carbon steel, the surface is polished after heat treatment, with high wear resistance and good lubrication.

【Specifications】 Camshaft Valve Lift (1.7 rockers): Intake: .585"/Exhaust: .585" 3 1/2 inch opening. RPM Range: 2200 to 5400, Lobe Separation: 112°. Intake Centerline: 108°.Cam Gear Attachment: 3-Bolt.Duration At .050" Lift 228/230

Tektall Gas Can Spout Replacement kit, Suitable for most 1/2/5/10 gallon oil cans, As shown in the picture The internal thread size is 1.35in & 2.475in, It can only be used for gas tanks with a tank mouth size of 1.4in & 2.48in. Please measure your oil tank mouth size before purchasing

【Good Helper for Oil Can】 The flexible design of spout makes it easier to pour gas. With this nozzle to pour the liquid, you will never spill gas all over yourself and your equipment again. You can adjust the angle to pour gas into tank simply and easily

【Top Quality】 Made of high quality polyethylene.In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.And the kit have 6pcs gas cons vent cap，It is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.

【Do you know this?】In your car, if you notice that the engine may crank and not start, or the engine speed increases sharply when idling, in addition to checking the engine indicator, it is most likely that the air mass flow sensor or MAF meter is malfunctioning and needs to be replaced.

【Replaces Part Number】 2225035050 22250-35050

【Fitment】Tektall New Air Flow Meter Sensor Replacement for 1989-1995 4-Run-ner SR-5 2.4L 22REC; 1989-1995 Truck 2.4L ( VIN: 4, J, JT4RN9, JT4RN8 )

【Specification】 Tektall weld gauge can measure Inch Metric for Cam Welding Gauge Inspection Surfaces Joints. Measurement range: 0 to 60mm, angle of preparation: 0 to 60 degree angle.Linear measurements up to 60mm or 2 inches.

Tektall bridge cam gauge can easily and quickly check the Welding measurements required, applicable for testing of boilers, bridges, shipbuilding, pressure vessels and pipeline of oil fields Etc.

【Top Quality】 Tektall chamfer gauge is made of high quality stainless steel, durable and rust-resistant with high precision.

Top Quality: Each fuel pump are redesigned and tested strictly for greater durability and steability, Pressure & Flow are always right on the position,

Fitment: Brand new aftermarket Tektall Fuel Pump Replace for Kohler ECH630 ECH650 ECH680 ECH730 ECH740 ECH749 ECH940 ECH980 ECV630 ECV680 ECV730 ECV740 ECV749 Series lawnmower Engines.

MPN: Directly Replacement Replace for Kohler 25 393 16-S, 2539316S, 25 393 14-S, 2539314S, 25 393 11-S, 2539311S, 25 393 10-S, 2539310S, 25 393 09-S, 2539309S.

【Top Quality】 Made of Highly durable Cast Aluminum . High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably.

【Fitment】 Fits for Chev-rolet small block V8 gen. III/IV (LS BASED) 4.8 5.3 5.7 6.0 6.2 7.0

【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration. Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ TSP 81015) LS style ignition coils.

【Good Quality】 Tektall 1" Intake Manifold Spacer made of High quality alloy.Sturdy and durable, and has reached OEM specifications.

【Fitment】Tektall Alloy 1" Intake Manifold Spacer fit for Ford Mustang 5.0L GT-40 explorer Cobra 1987-1993 year.

【Product Dimension】 THICKNESS 1" Made of High quality alloy.

【Fitment 1】Fits Various Tecumseh Engines Including: Tecumseh H35-45751Y, Tecumseh H35-45801B, Tecumseh HM100-159010D, Tecumseh HM100-159035D, Tecumseh HM100-159090H, Tecumseh HM100-159151H, Tecumseh HM100-159317P, Tecumseh HM100-159319N, Tecumseh HM80-155022F, Tecumseh HM80-155128G, Tecumseh HM80-155261G, Tecumseh HM80-155315L, Tecumseh HM80-155371N, Tecumseh HM80-155400M, Tecumseh HM80-155450L, Tecumseh HM80-155472M, Tecumseh HM80-155490S, Tecumseh HM80-155569P, Tecumseh HM80-155571T

【Fitment 2】Tecumseh HM80-155574P, HM80-155579T, Tecumseh HM80-155638S, Tecumseh HMSK80-155326S, Tecumseh HMSK80-155361R, Tecumseh HMSK80-155377U, Tecumseh HMSK80-155550V, Tecumseh HMSK80-155672X, Tecumseh HS40-55614R, Tecumseh OHSK120-222005A

【Features】 This gas tank is in good condition, does NOT leak, and is fully functional and ready for use. Dimensions appx 11" x 6" x 5".

【Fitment】Brand New Aftermarket front wheel hub kit Replace For Club Car DS Golf Cart 1982-2002 Models

【Top Quality】 The Tektall Golf Cart Front Wheel Hub Assembly is made of solid alloy, which guarantees exceptional durability and longevity. This material ensures that your golf cart's wheel is safe and secure, even in tough conditions.

【Replacing OEM number】 Our product is a direct replacement for 11011102, 1011153, 1011889, 1011892, 1011894, ensuring consistency in performance and compatibility with your golf cart. You can be confident that the Tektall Front Wheel Hub Assembly will fit perfectly with your golf cart.

【Rugged Nylon Braided Fuel Line & Good Quality Aluminum Connectors】 The nylon fiber and stainless steel braid 10an cover layer has excellent flexibility and abrasion resistance. The high-quality CPE (chlorinated polyethylene) synthetic rubber inside can provide a constant flow during the running of the racing engine.All connectors are made of aluminum can be reused with high strength and good durability.

【Wide Application】 Tektall 6AN fuel line repair kit fits most standard 3/8 inch stub tubes in any fuel system. It is widely used in coolant, fuel, diesel, engine oil, hydraulic oil, pump gas, alcohol and air. Suitable for vehicle/motorcycle gearbox cooling system, pump, turbine system and fuel system, such as fuel pump, fuel filter, fuel tank, oil filter, oil clamp adapter, turbine oil return, etc. (Please note: Not suitable for E85).

The operating temperature range of hose is -40°F to 257°F (-40°C to 125°C). Maximum working pressure (psi): 500 psi. Burst pressure (psi): 1800psi.

Top Quality Brand new aftermarket Tektall Carburetor Throttle Linkage kit, made from solid steel to resist failure caused by weakness in the original part's construction, durable and sturdy linkage contains all of the quality hardware and features for IDF Carburetor linkage.

Fitment: This Tektall carburetor Throttle linkage kit Fits for Weber 40mm 44mm 48mm bore IDF Dual Carburetors' mounting, which is always used on earlier VW Beetle T1 cooling Engines.

New adjustable drop rods and ball end carburettor throttle levers are included As pictured, Rods are about length 35cm center to center.

Top premium-quality, ethanol-resistant, Made of Alloy, Well CNC Machined, Accurate, Good finishing to ensure the Durability and the reliability.

Replace for OE Part No. : 11-0420, It's NOT For CV40 Carburetor.

Fitment: Brand new Tektall intake manifold Replace for S&S Super E Shorty Carb Big Twin or Sportster Carburetor and Centain Buell RR1000, Cylone M2 M2L Series Carby.

【Top Quality】 Made of Highly durable Cast Aluminum . High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably

【Fitment】 Compatible with Che-vy Small Block SB V8 293 325 376 427, Black. Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ 81015) LS style ignition coils.Valve Cover Base Mounts to LS1, LS2, LS3, LS6, and LS7 Engines.

【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration.

【Top Quality】 Made of Highly durable Cast Aluminum . High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably.

【Fitment】 Valve cover mounts to SMALL BLOCK V8 GEN. III/IV (LS BASED) LS1, LS2, LS3, LS6, and LS7 engines

【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration.

【Good Quality】 Tektall Carburetor made of Alloy, Well CNC Machined, Accurate, Good finishing, Great throttle Valve, Float, Standard Jets Kit installed, Each of them is tested again and and again to ensure the Durability and the reliability.

【Product Dimension】 Air Filter :Overall Diameter at Widest Point: 95 mm,Overall Diameter at Top: 85 mm,Rubber Intake Inner Diameter: 62 mm,Rubber Intake Outer Diameter: 74 mm,Overall Height: 147 mm. Intake Adapter: Mounting Hole Distance: 42.5mm ,Length: 62.5mm ,Width: 62.5 mm,height 31 mm.

【Fitment 1】 Tektall Carb Fit for Clone 6.5 HP GX160 GX200 196cc Predator 212cc 173cc Mini Bike Go Kart.

【Top Quality】 Made of Highly durable Cast Aluminum and it is black anodized. High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably.

【Fitment】 Valve cover mounts to SMALL BLOCK V8 GEN. III/IV (LS BASED) LS1, LS2, LS3, LS6, and LS7 engines

【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration.

【Top Quality】 Rust-resistant for long-lasting performance, Two Stainless Steel Bellows for greater compliance with thermal expansion, Ductile Cast Iron Y-Pipe for superior high temperature strength.

【Fitment】 Replacement For Ford 7.3L turbo V8 diesel models only; Replacement For Ford Excursion 2000-2003; Replacement For Ford E-350 Econoline Club Wagon; Replacement For Ford F250 F350 F450 F550 Super Duty 1999-2003

【Replace Part #】 679-005, F81Z-6K854-EA, F81Z-6K854-DA, F81Z6K854EA, F81Z6K854DA on various 1999-2003 | 99 00 01 02 03 Ford 7.3L Powerstroke Turbo V8 Diesel Models

【Fitment】Tektall Alloy Intake manifold adapter for Cfm 4412 500 350 2-barrel Spacer Race car oval track .

【Good Quality】 It is made of solid alloy with high finish. The installation hardware and installation sealing gasket are as shown in the figure. It can be installed without purchasing additional bolts. Everything you need is in the package, as shown in the picture. Please use studs if possible, do not over-tighten, and the correct design is suitable for its intended application without vacuum leakage.

【High performance】 Tektall intake manifold adapters are threaded into smooth aluminum castings to safely install carbohydrate studs. The shape of the holes provides a smooth transition from carbohydrates to air intakes. Just turn the key and it will start immediately. It will definitely improve your throttle response.

【FITMENT】Compatible with Polaris RZR Turbo 2016-2021: Tektall Brake Pressure Switch (4014262) is a high-quality replacement part designed specifically for Polaris RZR Turbo 2016-2021. If you have a damaged or malfunctioning brake pressure switch, this replacement part will restore your vehicle's braking system to its original performance.

【PREMIUM QUALITY】 4014262 Brake Pressure Switch is closely inspected and validated to meet all kinds of strictest quality standards to ensure a long lifetime, and tested before leaving factory to make sure reliability and superior performance

【REPLACE OE PART NUMBER】4014262,791071.Tektall Brake Pressure Switch is built to the same original equipment manufacturer (OEM) standards as the original part, ensuring a perfect fit and reliable performance. The part number 4014262 matches the original part, making it easy to find the right replacement for your vehicle.

【Top Quality】 Tektall Differential Cover is made from thick-walled high strength nodular steel, come with a durable powder coat finish. DURABLE RUST-PROOF CONSTRUCTION makes it ideal for any situation, while the large ribs help to dissipate heat faster

【Fitment】G.M 8.5” & 8.6” Ring Gear Differentials (See compatibility list below)

【Specs】 Bolt Pattern: 10 Bolt; Material: High Grade Die Cast Aluminum; Finish: Polished; Bolts Size: 5/16”-18 x 1”; Drain Plug: 1/2" NPT

Premium Quality - Made in quality materials, and we tested each one to meet or exceed the OEM specifications before shipping.

Fitment - Fits all package of 2011-2014 RZR 900 ( including XP & XP-4 ).

Function - Allows engine cranking and permits the engine to run without delivering power to the transmission. While disengaging, it permits the driver to shift the transmission into various gear according to operating condition. While engaging, the clutch slips momentarily.

【Fitment】 Compatible with 1999-2008 Che-vy Buick G.MC Cadi-llac Vehicles Including Chevy chev-rolet Silverado 1500 2500 3500, Envoy, Cadillac CTS Escalade, Buick Rainier, Pontiac GTO, Firebird, Suburban 1500 2500, Express 1500 2500 3500, Tahoe, Avalanche 1500 2500, Trailblazer, Camaro, Corvette, SSR, G.MC Sierra 1500 2500 3500, Yukon, Savana 1500 2500 3500. ( Please check your car fitment as below before purchasing)

【Replaces OE Part #】12570427, 8-12561-820-0, 8-12570-427-0, 264-965,264965,12582224; Please check your car information before purchase

【Top Quality】 Made from high-quality materials, the Engine Valve Cover Assembly is designed to meet or exceed OEM standards, ensuring optimal performance and durability. With its robust construction and advanced design features, this valve cover assembly is built to withstand the toughest driving conditions and provide long-lasting reliability.

Made of high quality polycarbonate plastic, more durable than acrylic plates.

The see-through PC plastic allows easy placement of materials for a precise die cut.

Exactly same thickness as original C plates. No extra cardstock or shim is needed to make the sandwich thick enough for a clean cut.

Well Design: Thickened and widened handle, smooth and rounded edges, elegant and modern gold appearance, brings better experience. And the ergonomic handle makes it easier to cut your cake.

Premium Material: Made of high quality stainless steel, no rust, no corrosion, no bending; the standard material can be safer to contact with food. All structures are made of stainless steel.

Good Practicality: The extended knife head and the uniform serrated blades make cutting larger cakes faster. The widened serving panel has enough space to prevent cake pieces from falling off while moving.

Fit ESAB/L-TEC PT-31 JG-40 and WSD-40 Cutting Torch

10pcs Plasma Tips Nozzle Extended Ref No: 18866L

10pcs Electrode- Extended Ref No:18205L