Best Tenfun in 2026

This 2nd generation scissor jack works with a saving strength ratcheting handle to raise and lower, it is different from the old metal rod jacks.

Product parameters: A lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,307 lb) capacity, it suits for most sedans.

Comparing with hydraulic jack, this portable car lift is really handy and it is light enough to leave in your trunk.

Each trailer stabilizer jack: Extended height: 18"; Retracted (collapsed) height: 11-1/2", static load capacity: 1000 lbs, lift capacity: 650 lbs, which helps to keep your trailer level and stable.

Design：design of telescoping structure, strong and easy to bolt or weld, suitable for RV trailer camper stabilizing leveling

Product surface: black environmentally friendly electrophoretic paint, not easy to rust

Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support

Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks

Adjustable height ranges from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity

Pair of 3-ton jack stands with 6,000-pound capacity total (when used together)

Self-locking ratchet means no locking key is necessary; meets ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment

Stand can be raised or lowered to the height needed; self-locking ratchet for ease of use

Sturdy stamped Steel Construction with 6 ton capacity

High quality cast ductile iron ratchet bar. Lifting range from 16 in. to 23-1/2 in

Double locks mechanism with both handle locks and mobility pin

the Scissor Jack Socket into your power drill are Simply insert,Works with all 3/4" Hex drive jacks/Scissor Recreational Vehicle Jack Trailer Stabilizers;

Reduces time and effort to raise or lower scissor jack;

Designed to work with 1/4-inch hex quick connect chucks;

Sturdy stamped Steel Construction with 3 ton capacity

High quality cast ductile iron ratchet bar

Double locks mechanism with both handle locks and mobility pin

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars,ATV's, UTV's, and more

Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported.Saddle Diameter:3.35 inch

Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, ATV's, UTV's, and more

Features a lifting range of 15-3/8" to 23-13/16" with a 6 ton (12,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported

Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%

Effortlessly Stabilizes RVs: Scissor jacks have a certified 7500 lb. load capacity

Easy to Install: Allows either bolt-on or weld-on installation

Adjustable Height: Can be adjusted from 4 3/8-inches to 23 ¾-inches high

Extends up to a 14" height

Easily hand-operated using 7/8" socket or wrench (sold separately) - Do not use an impact wrench or powered drill to operate the lift

Durable rubber padding on platform

Lightweight jack stands for supporting vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, ATV's, UTV's, and more

Constructed of high-grade aluminum; Removable locking support pins provide added security and stability and is equipped with 6 locking positions

Adjustable height ranges from 10-3/4" to 15-5/8" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, ATV's, UTV's, and more

Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported

Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%

Reduces time and effort to raise or lower Scissor jacks

Fits 3/8 inch or 1/2 inch power drills

Works with all 3/4 inch hex drive jacks

Reduces time and effort to raise or lower RV scissor jacks.  No need for hand cranks.

¾ hex socket X 1/4-inch hex quick connect shank

Designed to work with 1/4-inch hex quick connect chucks

COLORS MAY VARY: XL20 = A20015

LOW PROFILE FRAME: For easy access under low ground clearance vehicles.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

DURABLE CONSTRUCTION — Built tough with a black, powder-coated finish and rust-inhibitive surface that allows it to take on the wear and tear of RV travel

ECONOMICAL SOLUTION — Inexpensive and extremely reliable, this scissor jack kit is a must-have if you’re replacing an old or broken stabilizer jack

EXTENSION RANGE — The scissor jack extends up to a maximum of 24” and retracts to 4-1/4” for compact storage when not in use

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

Built-in internal safety valve and vent plug ensures safe operation

Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch

3.5-ton/7,000 lb. lift capacity

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows For Easy Maneuverability

LIFTING CAPACITY: 6,000 lbs.

DUAL PUMP PISTONS: Quickly Raises The Floor Jack Saddle To Load

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars,ATV's, UTV's, and more

Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported

Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%

If you are worry about compatibility, please check the oval's size on your jacks.Product Dimensions: 50.7*41.4*24 mm (2.0 x 1.63 x 0.95 inches); Slot Size: 8.8 mm(0.35 inch) wide; 23.90 mm (0.94 inch) deep; Bolt Length: 4.1 cm(1.6 inches); Bolt Dimensions: 9.7 mm(0.38 inch).

Sturdy: Power Saving Scissor Jack Adapter-Made of very solid chrome vanadium steel and new composite steel material. No more worrying during use.

Compatibility: After we adopted standardized production, scissor jack adapter is suitable for most of loop type or double eyelet type scissor jacks in the market .

SCREW JACK: The Ellis 4x4 Screw Jack is an extremely versatile product that will allow you to create an adjustable support of any length with your own 4x4 lumber. This product is designed to provide structural support in residential, commercial, trench, and collapse rescue shoring applications.

EASY TO USE: Designed to provide either vertical or horizontal support, this adjustable screw jack is functional, strong, and heavy duty. To adjust the height of the screw jack, simply turn the "U" shaped handle until you reach your desired height. Lock the Safety Screw in to set the height for long term support applications.

SAFE & SECURE: Built with high quality steel, this screw jack is designed to be long lasting and durable. This product is equipped with a safety lock, you can tighten the safety lock with an allen wrench once the final adjustment has been made.

Pit crew quality design, machined from lightweight aircraft aluminum with a sapphire anodized finish

Industrial quality for professional mechanics and hardcore automotive enthusiasts

Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps. Rubber saddle pad to prevent marring.

Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car

Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity

Engineered using a drop forged alloyed steel construction for quality and durability

Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car

Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity

Engineered using a drop forged alloyed steel construction for quality and durability

Net weight :5.68 lbs, Lift range from 4.09 inches to 15.15 inches

With the scissor jack you can easily and quickly adjust the height of your vehicles. Thanks to the handy ratchet handle and the smooth-running spindle, changing tires is child's play from now on.

The solid base plate also ensures a secure footing, corrosion-resistant, Strong metal construction made of steel, withstands high pressure

24 Months Parts Warranty; 1,500LB Heavy Duty

New Butterfly Foot Pedal with Auto Neutral Position (Patent Pending)

Exceptionally Durable E-Coated Black Paint Finish; Durable Powder-Coated Orange Paint Finish

SMART: Lift and safely hold your car, CUV or small SUV without the need for separate jackstands. The patented design both lifts and holds by combining a bottle jack with a jack stand in one unit

VERSATILE: Use the Unijack on both Unibody and body on frame vehicles. You can also use it for construction projects such as deck joists - makes it easy to level

STRONG: The Unijack lifts and supports a variety of vehicles with 4000-pound capacity and lift range of 8-5/8" to 18-5/8"

SCREW JACK: The Ellis Screw Jack is designed to build a fast and reliable adjustable support system up to 30,000 lbs. This functional and dynamic screw jack is the perfect tool for any residential or commercial project.

EASY TO USE: The Ellis Screw Jack attaches to 6x6 lumber and provides a 6" range of adjustment. The screw jack can be used as vertical or horizontal support in permanent or temporary construction, trench shoring, or in collapse rescue applications.

SAFE & SECURE: Built with high quality bulky steel design, this product is used as permanent or temporary support in commercial concrete construction and structural repair jobs that require heavy duty long lasting support jacks. This screw jack comes equipped with a safety lock to provide extra security.