Best Trueline in 2026

Surface for cell attachment

Individually labelled wells

Lid allows gas exchange

This completely self-contained battery-powered striping machine has a commercial quality air compressor on board.

The battery holds plenty of power to spray up to 60 gallons on a single charge. Simply plug it in overnight and it is ready for another 60 gallons the next day.

Comes with an advanced battery charger... just plug it in and walk away. Never worry about overcharging.

HashMarker Box Attachment for Trueline Stripers

It is sure to forever change the way hash marks are done! No more dragging stencils around! Just one man, in 30 minutes, can do all 320 hash marks. Were just sorry we didn’t have it for you sooner.

For the initial lining, just follow your string with the guide line pointer. The 1 yard measuring device will give you an exact spacing from your last hash mark or 5 yard line. Pull the trigger for a 1 second blast of paint and move on to your next one.

This light-weight, compact striping machine is built tough. This Trueline Striper is perfect for those small jobs.

Comes with Air Valve and Safety Relief Valve if you have a portable Air Compressor available

Pressure the paint tank as you would the tire of your car.

The battery holds plenty of power to spray up to 60 gallons on a single charge. Simply plug it in overnight and it is ready for another 60 gallons the next day.

Comes with an advanced battery charger... just plug it in and walk away. Never worry about overcharging.

Virtually no moving parts, noise or vibration.

Popular because there are no moving parts and one 20 lb. CO2 cylinder can spray up to 400 gallons of paint at 80 psi. before refilling for approx. $20.

These stripers are designed with higher pressure tanks and lines. This allows you to spray brighter, thicker paint and faster output. Pressures of up to 120 psi.

Sold without CO2 cylinder. Purchase a steel exchangeable cylinder from your local welding supply store

SET OF 8 Plates: EVERYMATE fractional weight plates include 2 x ¼ LB, 2 x ½ LB, 2 x ¾ LB, 2 x 1 LB. Thanks to these lightweight fractional plates you can slowly increase your weight-bearing load by putting on an extra ½ LB to 5 LB. These fractional plates have 2-inch center holes and will fit on Olympic barbells and 1-inch barbells with an Olympic sleeve adapter

Steel Fractional Weight Plate: EVERYMATE fractional plate is made of steel core which adds stability for plates.Corrosion-resistant, no peculiar smell. Don't worry about the smell of rubber in the fitness area at home

Color coding: Colored fractional weight plates and digital signs allow you to easily identify different weight plates during exercise, saving exercise time. The brisk and bright color distinction can make it easier for people with classification needs to separate while providing a more enjoyable exercise experience. These weight plates can withstand professional training use

RUBBER COATED CHANGE PLATE： EVERYMATE change plates are made of steel core which can add stability to bumper weight plates. We select high-quality rubber as a coating to create stronger and more durable change plates. Bumper fractional change plates are easier to handle than traditional iron plates. The high-quality rubber of the change plate prevents your floor from scratching. Corrosion-resistant, no peculiar smell. Don't worry about the smell of rubber in the fitness area at home.

COLOR CODING: Colored bumper change plates and digital signs allow you to identify different weight plates and save exercise time. For people with classification needs, the brisk and bright color makes the change plates more distinct and thus providing a more enjoyable exercise experience. These fractional change plates can also withstand professional training uses

WORK OUT GRADUALLY: 1.25, 2.5, and 5-pound change plates are suitable for you to increase weight in Olympic weightlifting training. With the help of these lightweight bumper fractional plates, you can gradually increase the weight. It is helpful to build muscle tissue and achieve an ideal training effect. In addition, these bumper change plates can also use separately

【Package Include】--Coming with 6pcs 96 well PCR low profile plate with non-skirted, enough quantity for you to use.

【Size Reference】 --The bacterial culture plate is about 4.65''/118mm wide, 3.11''/79mm long, 0.81''/20.5mm thick, 0.22''/5.5mm inner diameter.

【Ultra-thin Pipe Wall】--Super fast conduction of temperature. Thin and uniform tube wall ensures perfect heat transfer rate and uniform sample heating.

12 wells, each measuring approximately 1" in diameter and have a capacity of approximately 1.5mL

High quality, durable polyethylene

Easy to wash and reuse

Sterilized by E-beam, High clarity, 100% virgin polystyrene

Vacuum Plasma tissue culture treatment

Clear lot number for batch traceability, Peel-to-open, individually wrapped & sterilized by gamma irradiation

Surface for cell attachment

Individually labelled wells

Lid allows gas exchange

Plates are labeled with alpha-numeric markings for easy identification of individual wells

Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination

Lids have a stacking ring for added stability when handling tall stacks of plates

Lab equipment & instruments

Made in china

Manufactured by COLE-PARMER

Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination.

Lids have a stacking ring for added stability when handling tall stacks of plates.

Manufactured from medical grade virgin polystyrene.

Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination.

Lids have a stacking ring for added stability when handling tall stacks of plates.

Manufactured from medical grade virgin polystyrene.

MATERIAL: The culture plate is made of high-quality PS with transparent appearance.

PACKAGING: Individual package with lid, easy to identify with digital code, irradiated by gamma rays.

FEATURES: The specially treated surface can ensure the tissue adhesion with good compatibility with most porous plate instruments and equipment.

MATERIAL: The culture plate is made of high-quality PS with transparent appearance.

PACKAGING: Individual package with lid, easy to identify with digital code, irradiated by gamma rays.

FEATURES: The specially treated surface can ensure the tissue adhesion with good compatibility with most porous plate instruments and equipment.

Standard-volume, sterile plates for the cultivation of adherent cell lines.

PS-surface with different chemical groups, such as carboxyl and hydroxyl groups, that are freely accessible

Surface is hydrophilic compared with non-treated PS

Collagen I Coated

Detection Zone created by Biocompatible Gel

Opaque design prevents well-to-well crosstalk

Plates are optimized for minimal auto-fluorescence and auto-luminescence

Minimal residual volume and high well-to-well homogeneity

Angled plates improve ergonomics by preventing the researcher from reaching further into the hood and reducing costly transfer errors with better visibility to the bottom of narrow wells.

2-pack includes one 30 degree and one 40 degree stand to accommodate different media volumes without spilling over .

Simplified functional design securely holds rectangular well plates, rectangular flasks and round Petri dishes from 60-200 mm wide.

Fibronectin Coated

Detection Zone created by Silicone Stoppers

Collagen I Coated

Detection Zone created by Silicone Stoppers

Collagen I Coated

Detection Zone created by Biocompatible Gel

Poly-D-Lysine-equivalent surface, with analogous results regarding growth performance and cell morphology

Optimal adhesion of cells to the surface reduces cell damage when washing frequently

Cultivation of cell lines with the highest demands on their environment

Include 15 pack tissue culture plate with lid, each 96 wells.

Overall measurement:5''L*3.3''W*1.5''H. Single well: 6.2mm D*10.2mm H, 300μL in capacity.

The culture plate is made of premium quality polypropylene, sturdy and thick.

Plates are labeled with alpha-numeric markings for easy identification of individual wells

Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination

Lids have a stacking ring for added stability when handling tall stacks of plates