Best Tycoonwon in 2026

Reb complete valve rebuild replacement kit Includes cartridge (ta-10), seats (ta-4) and seat removal tools (t-35a/B).

Automatically adjusts to balance the hot and cold water pressure.

A well-maintained valve helps provide years of safe, comfortable showers.

Include GP77886 Mixer Cap and GP500520 Pressure Balancing Unit

Square Brass Stem to ensure proper fit and allow smooth handle rotation.

Please clean up the debris in the pipe before installation

Cartridge has a diaphragm to ensure consistent pressure in your shower，compatible for for rite-temp bath and shower valves,and pressure balancing valves 1/2" with single handle.

do not drop the PBU inside the brass body at an angle and rotate it.this will cause the small o-rings in the PBU to move position and your valve will leak.

Temperature limit stop provides temperature control for safety while allowing maximum water temperature

Reduce the lateral movement of the rear axle，enhance the stability of operation.

Easy installation, no need to punch.

Fit for 16-19.5k GVWR, Please check your GVWR to ensure correct fit!

SHARKBITE BRASS PUSH STRAIGHT STOP: Brass push straight stop valves are used to control and shut off water flow to fixtures or appliances for maintenance and repair; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Brass push straight stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes

EASY TO INSTALL: This innovative stop valve features a 1/2-inch push-to-connect inlet and a quarter-turn full-port brass ball valve for quick and easy operation; no special tools, crimping, glue, or soldering needed; can be installed in wet lines

SHARKBITE BRASS PUSH ANGLE STOP: Brass push angle stop valves are used to control and shut off water flow to fixtures or appliances for maintenance and repair; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Brass push angle stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes

EASY TO INSTALL: This innovative stop valve features a 1/2-inch push-to-connect inlet and a quarter-turn full-port brass ball valve for quick and easy operation; no special tools, crimping, glue, or soldering needed; can be installed in wet lines

Fix leakage due to the failure of stem or spring/seat

Brass stem and stainless steel plate add extra strength

Package includes stems, 1/4 turn stops, rubber seats, and springs

ICE MAKER OUTLET BOX: Eastman ice maker outlet boxes provide a safe water supply installation to ice makers, and are designed for recessed residential applications

DURABLE: This Eastman PEX Pre-Assembled Ice Maker Outlet Box features a brass 1/4 turn valve, and is built for long-lasting reliability; UPC approved and lead free compliant

WHAT IS INCLUDED: The ice maker line box comes complete with (1) pre-installed 1/4-turn ball valve, (1) support bracket, and (1) faceplate cover

SHARKBITE BRASS PUSH ANGLE STOP: Brass push angle stop valves are used to control and shut off water flow to fixtures or appliances for maintenance and repair; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Brass push angle stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes

EASY TO INSTALL: This innovative stop valve features a 1/2-inch push-to-connect inlet and a quarter-turn full-port brass ball valve for quick and easy operation; no special tools, crimping, glue, or soldering needed; can be installed in wet lines

SHARKBITE BRASS PUSH ANGLE STOP: Brass push angle stop valves are used to control and shut off water flow to fixtures or appliances for maintenance and repair; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Brass push angle stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes

EASY TO INSTALL: This innovative stop valve features a 1/2-inch push-to-connect inlet and a quarter-turn full-port brass ball valve for quick and easy operation; no special tools, crimping, glue, or soldering needed; can be installed in wet lines

LONGSTANDING FLEXIBILITY: Built on the Moen M-PACT common valve system, allowing you to update the faucet style in the future without replacing any plumbing

ORIGINAL EQUIPMENT MANUFACTURER: Authentic Moen replacement part

CONNECTION SIZE: 1/2-inch IPS connections

1/4-inch compression by 1/4-inch compression

Heavy duty, commercial grade

Brass ball valve, male flare

1/4-inch compression by 1/4-inch compression

Heavy duty, commercial grade

Brass ball valve, male flare

SHARKBITE BRASS PUSH ANGLE STOP: Brass push angle stop valves are used to control and shut off water flow to fixtures or appliances for maintenance and repair; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Brass push angle stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes

EASY TO INSTALL: This innovative stop valve features a 1/2-inch push-to-connect inlet and a quarter-turn full-port brass ball valve for quick and easy operation; no special tools, crimping, glue, or soldering needed; can be installed in wet lines

Easy for Installation: Smooth threads will reduce the resistance during installation, saving time and improving efficiency. Easy and convenient to install with PEX Clamp tool,no need flame, flux, or solder and requires no bonding agents, glue, or solvents.

Sturdy Handle: The handle is big and easy to use. And It’s good enough to use thousands of times and won’t get lose. Handle is quite important for longer service life.

Reliable quality: Directly from our reliable Pex Fitting Manufacturers, UPC Certified; Compliance with NSF/ANSI 61,section 8

1-Hole installation

Includes Rough in valve and pressure balance cartridge

Back-to-back compatible installation

One-piece Copper Brass Valve Body

Used as shut-off valve or water saving adjustable valve

On/ Off Switch with Quarter-turn easy operation

Complete flexibility: Delta's MultiChoice universal valve gives you flexibility to upgrade your shower trim without altering plumbing. It is compatible with most Delta single-function, dual-function, or dual-function thermostatic trim kits

Recommended use: Compatible to meet the needs for the most commonly used plumbing methods and is ideal for shower units with bath tubs and tub spouts

Universal connection options: 1'2-inch universal inlets accept 1'2-inch copper, 1'2-inch iron pipe, PEX or CPVC adapters

Includes valve body, pressure balance cartridge, rough-in guide and mud guard

1/2" Universal NPT & direct sweat inlets & outlets, with stops

Service stops include integral check valves

WARM UP YOUR BATH: Brushed Nickel finish provides a warm-grey metallic look

VALVE REQUIRED: This trim kit requires valve # 2510 to complete installation

LONGSTANDING FLEXIBILITY: Built on the Moen M-PACT common valve system, allowing you to update the faucet style in the future without replacing any plumbing

Install with Confidence: The SR SUN RISE Shower System has cUPC Certification and is compliant with the following standards: ASME A112.18.1-2018/CSA B125.1-18. It is designed to be used with standard 1/2" U.S. plumbing connections and is approved by the California Energy Commission. Flow Rate is 1.75 Gallons Per Minute (6.6L/min). You can rest assured that your contractor or plumber won't reject this shower system set.

Protect Your Family: The SR SUN RISE Full Line Shower Faucet Sets are cUPC certified to ensure a safe water temperature in the shower and avoid unnecessary harm to the human body caused by running hot and cold water. Please identify certified shower systems that protect the rights and safety of consumers and prevent substandard products from entering the market.

100% Satisfaction Guaranteed: With a 10-year warranty, any product quality problem can be guaranteed free of charge, and the shower cartridge is permanently replaced free of charge. SR SUN RISE always stands by their consumers. If you have any questions, please feel free to contact our 24/7 online customer service team. Customer Service: +1 888-232-9842

Kohler GENUINE Part

Replacement Rite-Temp pressure-balancing unit cartridge and cap kit, includes GP800820 and GP77759

Replaces Kohler part GP76851, Application - Tub & Shower

WARM UP YOUR BATH: Brushed Nickel finish provides a warm-grey metallic look

VALVE REQUIRED: This trim kit requires valve # 2510 to complete installation

LONGSTANDING FLEXIBILITY: Built on the Moen M-PACT common valve system, allowing you to update the faucet style in the future without replacing any plumbing

Quality Promise: All-metal sturdy construction. Mixing valve made of solid brass with rust-free, long-life characteristics. 304 Stainless Steel Rain Shower Head with silicone nozzles allows you to wipe away mineral deposits with the swipe of a finger.

Prevent Water Hammer: This pressure balance valve has built-in two check valves to effectively eliminate water hammer noise. Pressure balance valve's cartridge monitors water pressure balance, helping to protect you from being scalded by sudden changes in hot or cold water pressure.

Install with Confidence: SR SUN RISE Shower System has cUPC Certification and compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18. Designed for use with standard 1/2" U.S. plumbing connections. Approved by the California Energy Commission.

What You Get: EMBATHER Shower Faucets Sets Complete with Rough-in Valve, 10" Chrome Rain Shower Head, Handheld Shower Head, 71" (1.8M) Extra Long Shower Hose, 360°Adjustable Shower Holder, 16" Long Shower Arm, Installation Manual and Install Hardware. This Shower Fixtures is Perfect for New Home Remodeling; Also a Great New House Gift for Your Friend!

Quality Assurance Brings Easy Shopping: EMBATHER Shower System(ALL Shower Unit） has cUPC Certification and Complies with the Following Standard(S): Asme A112.18.1-2018/Csa B125.1-18. Designed for Use with Standard 1/2" U.S. Plumbing Connections. Approved by the California Energy Commission.No Need to Worry about The Installation Failure due to Certification Issues

High Pressure and Save Water :With Innovative Air Injection Technology, EMBATHER 10 Inches Large Rainfall Shower Head can Increase the Water Pressure to 100% and Make the Spray Gentle and Delicate, Giving You a Wonderful Showering Experience by Providing Your Whole Body with a Consistent Powerful Shower Massage!

Confident Installation: The SR SUN RISE Shower System is cUPC certified and compliant with the ASME A112.18.1-2018/CSA B125.1-18 standard, designed for use with standard 1/2" U.S. plumbing connections, and approved by the California Energy Commission. Flow Rate is 1.75 Gallons Per Minute (6.6L/min). You can rest assured that your contractor or plumber won't reject this shower system set.

Family Protection: The cUPC certified SR SUN RISE Full Line Shower Faucet Sets ensure a safe water temperature in the shower to avoid unnecessary harm caused by running hot and cold water. Choose certified shower systems to protect consumer rights and safety and prevent substandard products from entering the market.

Upgraded Push Button Diverter: The press button diverter is a more user-friendly upgrade from the traditional square water diverter knob. Its non-slip design makes it easy to operate even with soapy hands.

Pressure-Balancing Valve Body and Cartridge Kit: Shower system valve body kit with 1/2" universal NPT and direct sweat inlets and outlets provides 5 GPM (18.9 LPM) and a maximum flow rate of 45 psi; shower valve kit includes valve body, pressure balance cartridge, rough-in guide and mud guard, 1.0 gpm (3.8 lpm) maximum flow rate at 60 psi (4.14 bar), N/A

Single Lever Valve Kit for Shower Faucet Set: Single lever design provides temperature regulation and anti-scald protection, cycling from off through cold to hot; features adjustable high temperature limit stop to control maximum water temperature from your showerhead, tub spout or shower wand

Easy Install Brass Shower Valve: Shower valve body is made from forged dezincification resistant brass, providing long term reliability and resistance to aggressive water conditions; reversible cartridge design with symmetrical valve inlets simplifies standard, back-to-back or thin wall installation

VERSATILE DESIGN: Chrome finish is highly reflective for a mirror-like look that works with any decorating style

VALVE REQUIRED: This trim kit requires valve # 9000 to complete installation

FLEXIBLE DESIGN: Can be installed between 8" to 16" for a more customized widespread

Package Dimensions: 3.81 L x 8.64 H x 7.37 W (inches)

Package Weight : 2.4 pounds

Country of Origin : United States

1/2" NOM (5/8" OD) Inlet x 3/8'' OD Outlet x 3/8'' OD Outlet

Features 1/4 turn, 3-Way Stop Valve with 2 Shut-off Valve/handle

Made of Lead Free Brass and a Chrome-Plated Finish