Best Vipjq in 2026

Note:Please check out the size and product to confirm the compatibility before purchasing.

Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO.Dimensions: 10" diameter x 2-1/4" wide

Mounting flange bolt pattern: 4 bolt,Wheel size: 14" and 15",Axle rating: 3,500 lbs

Note:Please check out the size and product to confirm the compatibility before purchasing.

Mounting flange bolt pattern: 5 bolt.Actual drum dimensions: 12-15/16" diameter x 2-3/8" wide

Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO.Dimensions: 12" diameter x 2" wide

【GOOD SEAL】- These glad hand gaskets are fine workmanship, soft touch and smooth surface, provide good seal and compatibility. Each seal is perfect for all standard glad hands. And our seals with a tapered base for easy installation, just insert the bottom part to the glad hand. Perfect for your truck.

【LONG SERVICE LIFE】- These glad hand o rings are made of high quality rubber. They're durable, good elasticity, high toughness, good torsion and tear resistance, resist oils, chemicals and water. the o-rings have good aging resistance, work well under long-term weather changes.

【20 PIECES PACK】- Glad hand seals bulk, they are packed in a fine bag. Abundant quantity can meet various use and replacement requirements in your daily work, and you can also share them with others. Carry seals with the vehicle and replace them immediately when necessary.

【GOOD SEAL】- These glad hand gaskets are fine workmanship, soft touch and smooth surface, provide good seal and compatibility. Each seal is perfect for all standard glad hands. And our seals with a tapered base for easy installation, just insert the bottom part to the glad hand. Perfect for your truck.

【LONG SERVICE LIFE】- These glad hand o rings are made of high quality rubber. They're durable, good elasticity, high toughness, good torsion and tear resistance, resist oils, chemicals and water. the o-rings have good aging resistance, work well under long-term weather changes.

【55 PIECES PACK】- Glad hand seals bulk, they are packed in a fine bag. Abundant quantity can meet various use and replacement requirements in your daily work, and you can also share them with others. Carry seals with the vehicle and replace them immediately when necessary.

<p> 🚚<b>DURABLE HIGH QUALITY MATERIAL</b>: Airline glad hands with high hardness steel plate with Grade 12.9; Anti rusting plated bolt with G5 Grade; Aluminum body in 6061 for long lasting; Meet or Exceeds SAE J318 standard for Automotive Air Brake Line;<br><br></p>

<p>🚚<b>NO LEAK THREADING & WITH EXTRA 2 REPLACE SEALS</b>: Leakage brings most frequent trouble for truck drivers. We have improved our manufacturing process for applying extra thread glue on the male thread of the hex handles.Beside using the durable rubber material of the glad hand seals, we also put extra 2 piece original gaskets in the pack to ensure longer working life of the glad hand. Truck drivers could replace it by hand in emergency case.</p>

<p>🚚<b>REPLACEMENT PART NUMBERS</b>: Fit most offroad trucks,trailers,semi trailers,freightliners, volvo vnl tractors, peterbilt accessories, cascadia truck.such cross refenence numbers as Velvac 035042/035045, Bendix 278850/278851, BWP M313C, Tramec 362012,Tectran 1011EF/1011SF, GLOBETECH GT-5331, HEBCO 441016, Vipar 079851, and etc.</p>

EASY TO INSTALL — With no actuator or hydraulic lines, installation is easier than hydraulic brakes. Electric actuator (sold separately)

SELF-ADJUSTING — Brakes self-adjust during every forward stop, providing up to 50 percent better braking distance

MULTIPLE OPTIONS - Available in left hand (road side) and right hand (curb side) and multiple wheel sizes and axle ratings

【HEAVY DUTY ANTI-SKID HANDLES】- Our handles weighs 476g, others usually only 357g. Our handles are more durable and not easy to break. Our wide hex handles provide better grip than the small cylindrical, and provide greater leverage for ease of coupling/uncoupling air lines.

【NO-LEAK】- High hardness steel clamp plates, port thread machined by lathe, smoother. Leak proof gum on the handle thread. They ensure that glad hands are tightly connected under strong air pressure. Gaskets are made of high-quality rubber, the aging resistance is very strong, prevent air leakage efficiently. Gladhands kit is color coded red & blue for easy identification.

【WITH 2 EXTRA SEALS】- Leakage is usually caused by the wear of rubber. The extra washers keep the glad hands in excellent working condition. This is a very cost-effective solution.

Premium LIBRA brand OE 10" x 2-1/4" electric trailer brake assemblies (1 left + 1 right) for one axle

works with most 3,500 lbs trailer axles in the market

Center Hole Diameter: 3", 4 holes mounting, bolt circle diameter: 4", mounting bolts installed, no nuts included

One New 12" X 2" Trailer Brake Drum Kit 8 on 6.5" B.C. for 7000 Lbs Axl

Bolt pattern: 8 on 6.5" 8 x 1/2"-20 studs installed 2 x bearing races installed

Kit also include: 25580 inner cone bearing and 14125A outer cone bearing, Grease seal 2.25" x 3.371" seals, EZ lube grease cap with rubber plug, 8 cone wheel nuts, 1/2" - 20 thread

EASY TO INSTALL — With no actuator or hydraulic lines, installation is easier than hydraulic brakes. Electric actuator (sold separately)

SELF-ADJUSTING — Brakes self-adjust during every forward stop, providing up to 50 percent better braking distance

MULTIPLE OPTIONS - Available in left hand (road side) and right hand (curb side) and multiple wheel sizes and axle ratings

TruRyde Pair of 10" x 2 1/4" self-adjusting electric brake assemblies

4 Hole Mounting for 3,500 lbs. trailer axle. Comes with mounting nuts, and lock washers

Contains 1 left and 1 right brake assembly.

Pair of 10" x 2 1/4" 5-4.5" bolt circle TruRyde hub and drums with parts (2 5/8" from center of one stud to the center of the next stud)

Pair of 10" x 2 1/4" TruRyde electric backing plates

Works with Al-Ko, Dexter, Lippert, and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.

EASY TO INSTALL — With no actuator or hydraulic lines, installation is easier than hydraulic brakes. Electric actuator (sold separately).Fit Type: Universal Fit

SELF-ADJUSTING — Brakes self-adjust during every forward stop, providing up to 50 percent better braking distance

MULTIPLE OPTIONS - Available in left hand (road side) and right hand (curb side) and multiple wheel sizes and axle ratings

Reinforced double layer standard air brake coils

Color-coded set: Includes both BLUE - Service and RED - Emergency coils

Working Length: 15' Leads 2 x 12" Meets SAE J844 and DOT FMVSS 106 Both lines are rated to -65F (-55C)

【INCLUDE】: 1 of Service Air Line and 1 of Emergency Air Line; 1 of ABS rated power line in green, 1 bracket mounting hanger to hold the 3 cables together and for easy hanging by spring tender kit (sping tender not included), 1 spiral wrapped for a clean and safety organization; Total length = 12ft

【REPLACE】: Could be used most freightliner trailer trucks, some cross reference number as follows: 42045656, 30-2151 302151, 169127, 13000, 451097, 6814.

【EXTRA 10 PIECE GLAD HAND SEALS】: 10 Extra glad hand seals were included in the package. Those are high quality silicone rubber mater with good elasticity, long duribilities, easy to replace the original ones in the glad hands. Glad hands seals are very important for good sealing for the whole 3 in 1 airline system and should be replaced frequently during driving.

Pair of 12" x 2" 8-6.5" bolt circle TruRyde hub and drums 25580 inner bearing 14125A outer bearing

Pair of 12" x 2" TruRyde electric backing plates

Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.

2x Trailer 6 on 5.5" B.C. hub drum Kits + 2x 12"x2" electric brakes for 5200-6000 Lbs Axle. Bolt pattern: 6 on 5.5";

Kit also include: 2x 25580 inner cone bearings and 2x 15123 outer cone bearings, 2x Grease seals 2.25" x 3.371", 2x EZ lube grease caps with rubber plug, 12 cone wheel nuts 1/2"x20 thread,

Also include: One right and one left 12" x 2" electric brakes with 3-1/4" center hole

Pair of 10" x 2 1/4" 5-4.5" bolt circle hub and drums with parts (2 5/8" from center of one stud to the center of the next stud)

Pair of 10" x 2 1/4" hydraulic freebacking plates

Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles

🚚【SPECIFICATIONS】👉[TRUCK/TRAILER CABLE for ABS SAE J2394 - 4/12-2/10-1/8 -65°C/-85°F (Green)] - [AIR BRAKE SAE J1402 A DOT TYPE S 3/8 I.D. (Black)] - [SAE J560 for Plug]; 👉1 Pair Glad Hands; 👉1 PC Tender Spring Kit; 👉4 PCS Gladhand Rubber Seals.

🚚【CROSS REFERENCE NUMBERS】👉15FT 3 in 1 Semi Truck Power Cable Replace for Philips 302171,30-2171,11-8115; Tectran 169157,13S15401; Tremec Sloan 451098,455180DSET; OTR6818; Peterbilt PE13050. 👉Glad Hands Replace for Velvac 035042 / 035045, Tectran 1011EF / 1011SF, Bendix 278850 / 278851, etc. 👉Tender Spring Kit Replace for Phillips 17-145, Tectran 9421-1.

🚚【7 WAY ELECTRICAL CABLE】Our power cord uses the industry standard zinc die-cast plug to efficiently transmit power from the engine to your trailer/truck. The real high-quality copper makes the cable have good thermal conductivity and electrical conductivity. The durable electrical cable ensures the normal use of lights such as turn signals and brake lights during driving.

【HIGH QUALITY MATERIAL】- 37 degree glad hands are made of high quality lightweight die cast aluminum.Excellent rust and corrosion resistance, strong and durable. Works well in cold winters and hot summers.Gladhands kit is color coded red & blue for easy identification.

【NO-LEAK】- High hardness steel clamp plates, port thread machined by lathe, smoother. Leak proof gum on the thread. They ensure that glad hands are tightly connected under strong air pressure. Gaskets are made of high-quality rubber, the aging resistance is very strong, prevent air leakage efficiently.

【SIZE】- Connect port size: 3/8 NPT thread (one plugged). 11/32" diameter mounting holes.

Package Weight: 10.35 pounds

The package length is 30.48 centimeters

The package height is 8.382 centimeters

M-Parts Two 12” Electric Trailer Brake Magnet Replacement Kit for 7k Brake Assemblies

Works with most 5,200 - 7,000 lbs trailer brakes including Alko, Dexter, Lippert, and Rockwell

Kit includes 2 magnets with wire, 2 coil springs, and 2 retainer clips

Package Dimension : 11.5 " L x 12 " W x 3 " H

Country of Origin: CHINA

Model Number : 30793

GENUINE REPLACEMENT PART — Lippert helps you take the guesswork out of getting your trailer back on the road with exact-match replacement parts

MUTIPLE OPTIONS — Our trailer brake hubs are available in a variety of bolt patterns, axle ratings and sizes to fit your needs

DURABLE CONSTRUCTION — This industry-standard hub assembly is constructed from solid grey iron

6 studs 5.5" bolt circle using 25580 inner and 15123 outer bearing.

Contains TruRyde inner bearing, outer bearing, 2 1/8" id and 2 1/4" seals, solid grease cap and lug nuts.

Fits a #42 Spindle and for use with 12" drum brakes

M-Parts Two 12-1/4” Electric Trailer Brake Magnet Replacement Kit for 10k Brake Assemblies

Works with most 9,000 - 10,000 lbs trailer brakes including Alko, Dexter, Lippert, and Rockwell

Kit includes 2 magnets with wire, 2 coil springs, and 2 retainer clips

【ELECTRICAL POWER CORD】- 7 Wire Trailer Cord is made of high-quality pure copper and has a longer service life. And with excellent conductivity and thermal conductivity to ensure normal use of lights (such as turning signals and braking lights) during driving.

【SAE J560 PLUG】- 7-Way plug: 100% meets SAE J560 testing and performance requirements. The zinc die plugs that meet the industry standards are not easy to deform or rupture, and effectively transmit the power from the engine to the semi truck trailer tractor.

【SPRING JOINT】- The two ends of ABS cables are protected by 3.94 -inch stainless steel spring. Springs with good elasticity can not only protect the wires well, but also have a cushioning role when installing and using a wire.

【ELECTRICAL POWER CORD】- 7 Wire Trailer Cord is made of high-quality pure copper and has a longer service life. And with excellent conductivity and thermal conductivity to ensure normal use of lights (such as turning signals and braking lights) during driving.

【SAE J560 PLUG】- 7-Way plug: 100% meets SAE J560 testing and performance requirements. The zinc die plugs that meet the industry standards are not easy to deform or rupture, and effectively transmit the power from the engine to the semi truck trailer tractor.

【SPRING JOINT】- The two ends of ABS cables are protected by 3.94 -inch stainless steel spring. Springs with good elasticity can not only protect the wires well, but also have a cushioning role when installing and using a wire.

GENUINE REPLACEMENT PART — Lippert helps you take the guesswork out of getting your trailer back on the road with exact-match replacement parts

MUTIPLE OPTIONS — Our trailer brake hubs are available in a variety of bolt patterns, axle ratings and sizes to fit your needs

DURABLE CONSTRUCTION — This industry-standard hub assembly is constructed from solid grey iron

New 12 x 2 mobile home trailer brake drum kit, replace Dexter drum 8-222-04 only.

bolt circle: 5 on 9.4"; 2 x bearing races installed

Kit include: L68149 inner & LM67048 outer cone bearing, 10-41 nylon grease seal, dust cap