Best Weldmonger in 2026

Finish that Long Pass without Burning Your Fingers

Pocket Size Durable Design Ideal for any TIG Job

Increases the Lifespan of Your TIG Glove

PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use

HIGHEST RATED and most reviewed 2% Ceriated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance.

EXCEPTIONAL for both AC & DC applications and for welding titanium alloys, copper alloys, magnesium alloys, aluminum alloys, nickel alloys, non-corrosive steels, and low-alloyed steels.

PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use

HIGHEST RATED and most reviewed 1.5% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance.

EXCEPTIONAL for both AC & DC applications and for welding titanium alloys, copper alloys, nickel alloys, and non-corrosive steel.

PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use

HIGHEST RATED and most reviewed Rare Earth Blend Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance.

EXCEPTIONAL for both AC & DC applications and for welding aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys, low-alloyed steels, and non-corrosive steels.

PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use

HIGHEST RATED and most reviewed 0.8% Zirconiated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance.

EXCEPTIONAL for AC applications and for welding aluminum alloys and magnesium alloys at higher amp levels

PREMIUM ten (10) pack of 1/8" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use

HIGHEST RATED and most reviewed 0.8% Zirconiated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance.

EXCEPTIONAL for AC applications and for welding aluminum alloys and magnesium alloys at higher amp levels

PREMIUM ten (10) pack of 1/16" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use

HIGHEST RATED and most reviewed 1.5% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance.

EXCEPTIONAL for both AC & DC applications and for welding titanium alloys, copper alloys, nickel alloys, and non-corrosive steel.

PREMIUM ten (10) pack of 1/8" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use

HIGHEST RATED and most reviewed 2% Ceriated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance.

EXCEPTIONAL for both AC & DC applications and for welding titanium alloys, copper alloys, magnesium alloys, aluminum alloys, nickel alloys, non-corrosive steels, and low-alloyed steels.

PREMIUM ten (10) pack 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use

HIGHEST RATED and most reviewed 2% Thoriated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance.

EXCEPTIONAL for DC applications and for welding copper alloys, nickel alloys, titanium alloys, and non-corroding steels

PREMIUM ten (10) pack of 1/16" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use

HIGHEST RATED and most reviewed 2% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance.

EXCEPTIONAL for both AC & DC applications and for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corroding steels

PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use

HIGHEST RATED and most reviewed 2% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance.

EXCEPTIONAL for both AC & DC applications and for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corroding steels

[RED-2% THORIATED] The Thoriated electrode is a traditional outstanding welding electrode, whose arc is continuous, stable, without spreading and dispersing. As it is not easy to get a round top with thermostability, it performs well in a lifetime.

[AWS CERTIFIED] AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance.

[PERFECT DESIGN] By checking the color of the outer packaging, you can quickly and easily distinguish the color and model of tungsten electrodes, saving your time and reducing the possibility of errors.

[BLUE-2% LANTHANATED] Lanthanated electrodes are popular due to the relative ease of striking an arc and lower amperage required. They perform exceptionally well in both AC & DC applications.

[AWS CERTIFIED] AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance.

[PERFECT DESIGN] By checking the color of the outer packaging, you can quickly and easily distinguish the color and model of tungsten electrodes, saving your time and reducing the possibility of errors.

[RED-2% THORIATED] The Thoriated electrode is a traditional outstanding welding electrode, whose arc is continuous, stable, without spreading and dispersing. As it is not easy to get a round top with thermostability, it performs well in a lifetime.

[AWS CERTIFIED] AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance.

[PERFECT DESIGN] By checking the color of the outer packaging, you can quickly and easily distinguish the color and model of tungsten electrodes, saving your time and reducing the possibility of errors.

Finish that Long Pass without Burning Your Fingers

Pocket Size Durable Design Ideal for any TIG Job

Increases the Lifespan of Your TIG Glove

Premium quality ER308L stainless steel TIG welding rods; available diameters 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER308L; 36" (914mm) length of rod with single end stamped; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

Features and Applications: filler metal for TIG welding (GTAW) process in stainless steel 304, 304L, 308, 308L, 321 and 347; with carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually 100% Argon.

TIG Alumina Nozzles Ceramic Cup Fit QQ300 DB PTA SR WP CK 17 18 26 TIG Welding Torch

Ref No 10N49 #5 5/16" x 1-13/16" D8.0*47mm

Work with 10N collet body

Premium quality ER308L stainless steel TIG welding rods; available diameters 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER308L; 36" (914mm) length of rod with single end stamped; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

Features and Applications: filler metal for TIG welding (GTAW) process in stainless steel 304, 304L, 308, 308L, 321 and 347; with carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually 100% Argon.

TIG welding torch power cable hose adapter plug for air-cooling torch gas/electrical connection: regular Weldcraft style female-end adapter 105Z57 and Dinse-type adapters (50mm and 25mm, gas-through or separate hose). Adapter only; power cable not included.

105Z57 regular standard Weldcraft style adapter with electrical stud hole and female fittings 5/8-18 RH (to gas hose) and 3/8-24 RH (to power cable hose). Dinse-type adapter available with Dinse 50mm (0.508" dia.) and 25mm (small, 0.355" dia) with options of in-line (gas-thru) and separate gas hose for different welders. All with female receptacle 3/8-24 RH to accept 1-pcs style power cable hose 57Y01R/57Y03R and other equivalent air-cooled TIG welding torch (usually 9/17-series).

For Miller welder, Dinse (50mm) plug with separate gas hose (Miller P/N 195378) or gas-thru (Miller P/N 194722) can be found in Maxstar 200/200STR/200SD/200DX&LX/250T/300, Dynasty 200, 300SD/DX/LX, Syncrowave 180SD, CST, Invision and XMT. Dinse (25mm small) gas-thru plug (Miller P/N 273483 or 195234) is for power supplies with small gas-thru Dinse connection.

Premium quality ER308L stainless steel TIG welding rods; available diameters 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER308L; 36" (914mm) length of rod with single end stamped; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

Features and Applications: filler metal for TIG welding (GTAW) process in stainless steel 304, 304L, 308, 308L, 321 and 347; with carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually 100% Argon.

💣【Material】- Tig Cover Using heavy duty cowhide split leather,uniform leather,wear-resistant,fullness and elasticity, excellent softness, strong toughness. It adopts high-strength line, strong, anti-scald, insulated pot nail, safe and secure.

💣【Protect your back】- Adjustable Velcro, adjust the elastic at will; easy to fold and place for easy storage

💣【Application】- High quality materials, Tig Cover effective protection of welding torch, long-term protection

Fit all TIG Welding and Plasma Cutter Machine

Dinse Cable Panel Connector

DKJ10-25 & DKZ10-25

Dinse Cable Panel Connector

1pcs DKJ10-25 200A Euro Style Cable Connector-Plug with Red Color

1pcs DKZ10-25 200A Euro Style Cable Connector-Socket with Red Color

Quick Fitting Euro Style Male Dinse Cable Connector-Plug

Model No: DKJ35-50

Rated Current: 315amp

Premium quality ER70S-2 mild steel alloy copper coated TIG welding rods; diameter 0.045", 1/16", 3/32" and 1/8" with 36" length.

Specification: conformed to AWS A5.18/ASME SFA A5.18/ER70S-2; 36" (914mm) long welding rods with single end stamped. Shielding Gas: Argon/CO2.

Features and Applications: ER70S-2 is a triple deoxidized wire which provides high quality and defect free weld deposits when properly used on most carbon steels for TIG welding (GTAW) process. All position welding. Typical applications: repairs on a variety of mild and low alloy steel; small diameter pipe and tubing; sheet metal applications; root pass pipe welding, etc.

For 17 18 26 torch

Long Back Cap

Ref No: 57Y02

Premium quality ER70S-2 mild steel alloy copper coated TIG welding rods; diameter 0.045", 1/16", 3/32" and 1/8" with 36" length.

Specification: conformed to AWS A5.18/ASME SFA A5.18/ER70S-2; 36" (914mm) long welding rods with single end stamped. Shielding Gas: Argon/CO2.

Features and Applications: ER70S-2 is a triple deoxidized wire which provides high quality and defect free weld deposits when properly used on most carbon steels for TIG welding (GTAW) process. All position welding. Typical applications: repairs on a variety of mild and low alloy steel; small diameter pipe and tubing; sheet metal applications; root pass pipe welding, etc.

Premium quality ER4043 Aluminum TIG welding rods with available diameters 1/16", 3/32" and 1/8"; 36" length. Package of 2-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.10/ASME SFA A5.10/ER4043; 36" (914mm) length of rods with single end stamped (or marked on rod); typical chemical composition %: Si=4.5-6.0; Fe=0.8; Cu=0.3; Mn=0.05; Mg=0.05; Zn=0.1; Ti=0.2; Al=balance.

Features and Applications: filler metal ER4043 rod for TIG welding (GTAW) welding process; general-purpose, all-position aluminum welding rod used to weld various grades of aluminum; it contains silicon additives, which may improve fluidity of the weld pool and also produces a weld less sensitive to cracking; its bright weld finish makes it a popular choice of welders; shielding gas required, usually 100% Argon, Helium or mix.

10-pk premium TIG welding Tungsten electrodes tri-element non-radioactive. Electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm); 7" (176mm) length.

AWS Classification: EWG (Purple). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed.

Mixed tri-oxides of Lanthanum, Zirconium and Yttrium with total rare earth composition around 1.5% - 1.8%; Tungsten remains. Non-radioactive Tungsten electrodes; excellent substitute for Thoriated Tungsten electrodes. Wide current range and low burn-off rate. Easy arc starts and good stability.

Pack of 10-pcs premium TIG welding Tungsten electrodes 2.0% Thoriated. AWS Classification: EW-Th2 (Red). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD.

Higher current range and stability. Better arc starts with lower tendency to spit. Medium erosion. Increased resistance to weld pool contamination.

Available Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm); 7" (176mm) length. Ground annealed.