Best Wexwe in 2026

DLC coating (diamond-like coating)-The tool surface to obtain ultra-high hardness(HV7000) Low coefficient of friction(μ=0.08-0.15)，Strong adhesion resistance

Use ultrafine grain tungsten steel matrix，Perfect combination of toughness and hardness，Improve wear resistance while avoiding breakage and fracture

Manufactured with five-axis precision grinding machine, Each milling cutter is tested by tool testing instruments，Good stability of dimensional accuracy

DLC coating (diamond-like coating)-The tool surface hardness(HV7000) Low coefficient of friction(μ=0.08-0.15)，Strong adhesion resistance

Use ultrafine grain tungsten-carbide steel matrix，Perfect combination of toughness and hardness，Improve wear resistance while avoiding breakage and fracture

Manufactured with five-axis precision grinding machine, Each milling bit is tested by tool testing instruments，Good stability of dimensional accuracy

FOR STAINLESS AND TITANIUM. Recommendation: high speed and low feed

The U-Flute design(above 1/4” will be used), improve the machining efficiency

Diameter tolerance 0 -0.02

Craft Knife Blades Package Included: 2box (10PCS/box) Blades-60 degree, Suit for all standard 18MM utility knife

Durable Stainless Steel Utility Knife Blades: 18mm width utility knife replacement blade is made of high quality Stainless steel material, 60 degree sharp head

Snap off Blades: All blades have Pre-cut Section that snap-off easily, so that the blades remains sharp all the time

Craft Knife Blades Package Included: 10box (10PCS/box) Blades-60 degree, Suit for all standard 18MM utility knife

Durable Stainless Steel Utility Knife Blades: 18mm width utility knife replacement blade is made of high quality Stainless steel material, 60 degree sharp head

Snap off Blades: All blades have Pre-cut Section that snap-off easily, so that the blades remains sharp all the time

Used in a milling machine to find the workpiece edge

All working surfaces are hardened and ground

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron

HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance

AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings

Product Name : End Mill;Material : HSS

Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"

Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron

HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance

AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings

Diameter: 5/8", Shank Diameter: 5/8", Flute length: 1-5/8", Overall Length: 3-1/4"

4 Flute, Standard Tooth

M42-8% Premium cobalt, TiAlN Coated

ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length

SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet

PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity

HIGH PERFORMANCE - Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency

STRONG EDGES - Prevents chipping at corners; Flutes ground in a world-class ISO-9001 Factory

MATCHED COATING AND CARBIDE MATERIAL - Highly optimized carbide and coating pairing means superior wear and chipping resistance in your cutting applications

✅ APPLICATION - Our carbide tools are highly effective for working with Titanium, Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~45), and Cast Iron.

✅ HIGH-PERFORMANCE MATERIAL - Crafted from micrograin carbide, this end mill offers exceptional toughness, durability, and machinability, delivering outstanding performance and great value for its price.

✅ DISTINCTIVE DESIGN - Our product delivers high performance, firm edges, anti-vibration, less chatter, reduced burring, and stable machining of difficult-to-cut materials.

Carbide Indexable End mills, 3/4'' straight shank, 2''

Comes with inserts installed

Uses standard triangular inserts

✅ APPLICATION -These cutters are ideal for machining Aluminum and Copper Alloys due to their U-shaped design and high feed rate.

✅ HIGH-PERFORMANCE MATERIAL - The exceptional Material Removal Rate (MRR) enables faster cutting, particularly when slotting.

✅ DISTINCTIVE TOOTH DESIGN: Double relief angles create excellent productivity, while the design optimized for alloys effectively enhances surface smoothness.

Class leading values got even easier to use. Pre-assembled and no fuss with assembly taking less than 30 minutes out of the box. An entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business.

Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.

Make more with the all-aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier.

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron

HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance

AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings

【MEASURING RANGE】Measuring range: 0-150mm/0-6’’,Accuracy: ±0.06mm/0.002’’,Resolution: 0.01mm / 0.0005’’

【READING】Inch, fractional & metric reading

【LARGE REMOTE LCD DISPLAY】Remote readout display convenient for reading and operation

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron

HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance

AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings

Package Included: 5pcs 1/2" carbide square end Mill

Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.

Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.

The nebulizer gas and coolant is adjustable, easy to use on different processing conditions

Gas processing chips are blown away, working safer; A lot of water problem solving tools, easier to clean up

Widely Used - In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.

✅ APPLICATION - Our carbide tools are highly effective at machining various types of steel such as Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~50), and Cast Iron.

✅ AlTiBN COATING - This coating, made of titanium aluminum boron nitride (AlTiBN), offers exceptional stability at high temperatures and surpasses the heat resistance of TiAlN, TiN, or TiCN coatings.

✅ HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.

Product Name : End Mill;Material : HSS

Color : Gray;Cutting Diameter : 12.7mm/1/2"

Cutting Depth : 35mm/1.4";Shank Diameter : 12.7mm/1/2"

4 Flute,Cutting diameter=5/16'',Shank diameter=5/16'',Flutes length=1-5/8'',Overall Length=3-1/2''.

Material:M2AI,High Speed Steel,long tool life.Extra long blade for deep cavity machining.

Suitable for aluminium,cast iron,copper,magnesium alioy,plastics,wood etc(under HRC32(HRA66)).

Comes with inserts installed. InsertS: APKT1604, Tin Coated.

Positive rake 90Degree, right hand cut. Shank Size: R8. Overall Length: 6-1/8".

Insert Style: APKT. Insert Size: 1604.

H.S.S.

Straight Shank

Metric Size: 3, 4, 5, 6, 8, 10, 12, 14, 18 & 20mm, 2F+4F

Contains 7Pcs square endmills:1/8''+5/32''+3/16''+1/4''+5/16''+3/8''+1/2'' Blade Diameter

Material:M2AI,High Speed Steel,long tool life.

Suitable for aluminium,cast iron,copper,magnesium alioy,plastics,wood etc

【High Quality CNC Bits】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.

【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.

【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.

New Version: Genmitsu Cnc 3018-Pro Is An Upgraded Version Of 3018. All Components Do Not Need To Be Positioned, Which Greatly Reduces The Difficulty Of Assembly And Improves The Working Accuracy. The Base Height Is Raised To 4Cm For Better Stability. Capable Of Cutting All Types Of Plastics, Soft Aluminum, Woods, Acrylics, Pvcs, And Pcbs, The Genmitsu Can Be Used On A Wide Range Of Projects And Materials

Upgraded Power Adapter: Ul Approved And Out-Of-The-Box Support For The Drop In 20,000Rpm Spindle, No Need To Modify G-Code To Ramp Up To Full Speed

Controller Software: The Genmitsu 3018-Pro Uses Grbl, A High-Performance Open-Source Software For Controlling Movement, And Runs On Arduino. Its Dependability And Simplicity Make Grbl An Industry Standard, So There’S No Lack Of Support And Resources Available When You Get Stuck. Includes Carveco Maker Cam Design Software And Candle For Controlling Your Machine And Running Your Gcode Design Files