Best Whfzn in 2026

Replace Part Number : Z-D26612,ZD26612

Pressure Setting Adjustable From 120-150 PSI.

¼” FNPT Inlet 4 Port,Differential Adjustable From 25-33 PSI

replaces Suzuki part numbers:LT80 13200-40B00 , 13200-40B10

replaces Kawasaki part numbers:KSF80 KFX80 15003-S005

Fits Suzuki：LT 80 Quadsport ATV 1987-2006；Fits Kawasaki：KSF80 KFX80 2003-2006

Replace Part Number : 201806GS

Pressure Setting Adjustable From 95-125 PSI

¼” FNPT Inlet 4 Port。

Manufacturers Part Number: 16100-Z9E-033 ,16100-Z9E-023,16100Z9E023

Compatible with hONDA Models : GX630 GX630R GX630RH GX660 GX690 GX690R V Twin Cylnder Engines

This is a twin cylnder engines carburetor, equipped with two new spark plugs to make the engine run more stable and efficient

Replace Part Number : CW219300AV

Cuts in at 120psi - Cuts out at 155psi.

1/4" Quick disconnect fitting for check valve line,¼” FNPT Inlet 4 Port.

Replace Part Number: 13780-07G00 13791-03G00 13780-03G00

Fits for Suzuki LTA500 Vinson 2002-2007 for Suzuki LTF500F Vinson 2003-2007 for Suzuki LTZ400 QuadSport 2003-2016 for Suzuki LTF400 Eiger 2002-2007

Fit for Suzuki LTF400 KingQuad 400 2008-2018 for Suzuki LTA400FL 2012 for Suzuki LTA400 Eiger Auto 2002-2007 for Suzuki LTA400 KingQuad 400 2008-2012 for Suzuki LTA400 KingQuad 400 ASi 2013-2018 for Suzuki LTA400FL LTF400FL 2019

Replace Part Number : 0470-449

Fits for Arctic Cat 0470-449 ATV 400 500 FIS TBX 2000 2001 2002

Measurement: Outlet side Outer Diameter: 42mm Outlet side Inner Diameter: 35mm Intlet side Outer Diameter: 55mm Intlet side Inner Diameter: 52mm

Replace Part Number : 13200-21G10 13200-05G22 13200-05G00 13200-05G11 13200-05G10

Compatible with Models: 2002-2009 Suzuki Ozark 250 LTF250 LT-F 250 carburetor

Compatible with Models: 2004-2009 Suzuki Quad Sport LTZ250 Carburetor

Replace Part Number : CW219300AV

1/4" Quick disconnect fitting for check valve line,¼” FNPT Inlet 4 Port.

Current Rating 26 AMPS ,120 and 240 volt

Replace Part Number : 13200-07G01

Compatible with Suzuki models : For Suzuki LTZ400 2003-2007 LTZ 400 Quadsport ATV Carb 2004 2005 2006

Compatible with Kawasaki models : For Kawasaki KFX400 2003-2006

Replaces Part Number: 0470-454 , CVK32 Carburetor

Compatible with Arctic Cat 300 Models : Arctic Cat 2002 375 Automatic 2x4, 2002 375 Automatic 4x4

Compatible with Arctic Cat 400 Models : Arctic Cat 2003-2004 400 Automatic 4X4, 2003 400 Automatic 2X4, 2003-2004 400 Manual 4X4, 2003 400 Manual 2X4

1/4" female national pipe threads

Both ends lock on valve core threads

Maximum pressure of 150 pounds per square inch

Ideal for replacing air compressor drain cocks

High quality, O-ring free construction

Pre-applied thread sealant for airtight connections

POWERFUL AIR FLOW - Perfect for blowing floor debris, cleaning masonry forms, tanks, ovens, molds, and rafters, as well as machinery and storage areas.

OSHA COMPLIANT - Venturi nozzle boosts thrust yet limits static pressure to less than 30 psi should the tip become blocked.

ERGONOMIC HANDLE - Pistol grip-style handle provides maximum user comfort for short or extended periods of cleaning.

Pneumatics

Manufacturer: Guardair

Country of Manufacturer: United States

Blow stubborn debris, dust, water, and more off of all kinds of materials and machinery with this powerful air blow gun with 150 maximum PSI

Control the air flow by turning the flow control knob conveniently located above the handle

Get to hard to reach areas with the extra-long 4.5 in. nozzle

New And Improved Internals

Valve Design Makes This Blow Gun More Convenient, Faster, And Easier To Use For All Applications

Comfortable Lever Control And Insulated Handle

SAFE ON SURFACES - Mar-resistant rubber tip and safety tip helps avoid knicks/scratches on paint or other fine surfaces.

VERSATILE - Ideal for removing debris, drying off fluids, blowing out air lines, easy project clean-up, and offering a tight and leak-proof fit in narrow spaces.

SPECIFICATIONS - Maximum of 150 PSI. Rubber Tip has a maximum 12.9 SCFM at 100 PSI. Safety Tip has a maximum 11.7 SCFM at 100 PSI.

WATER SEPARATOR: An essential air tool accessory for mechanics and craftsmen that stops moisture and particles from entering air spray guns and other air compressor tools to keep your equipment in top performing shape.

OIL SEPARATOR: This air filter unit separates the oil from the air as the oil needs to stay inside the compressor to keep it lubricated while the compressed air needs to exit the compressor free of oil to ensure maximum air output to your air tools and increase reliability and lifespan.

MAXIMIZE PERFORMANCE: The water oil separator traps water vapor, dirt, and dust to maximize the performance of air compressor tools for cleaner and more even jobs providing excellence in execution and saving you countless dollars in replacing expensive air tool equipment.

REDUCED FATIGUE - Ergonomically superior aircraft aluminum gun body for maximum comfort and control

MAXIMUM FLOW - Equal to or greater than the competition

MODULAR ACCESSORIES SYSTEM - Customize the gun extension length and tips for every application

PERFECT FOR ANY TOOLBOX - 2 PRY TOOLS, 2 EASY CARRY TOTE BAGS INCLUDED! Great for multiple jobs and applications such as, Precise Alignment and Leveling. Air lift non-marking shim for window, door, cabinet installations, appliances, HVAC, plumbing.

SAVE TIME AND MONEY - Allowing a single installer to do the job of many. Our Shim Bags will help hold in place and level counter tops, door frames, window frames, cabinetry, and more!

COMMERICAL DESIGN, CONSUMER PRICE - With rounded corners, stiff durable edges, smooth exterior and internal stiffener for easier insertion, our wedges are designed for ease of use. Quick easy push button air valve for precise leveling with one finger. FITS into tight 3/32 inch gaps and opens to 2 1/2 inches wide with one hand pump operation. 300 POUND load rating for maximum weight capacity.

QUALITY ASSURANCE - Indicator bar is hot stamped with durability and not pad printed.

PRECISION TUBE - Precision seamless drawn tube.

EXTRA FEATURES - Includes a hang-up loop for easy, simple storage.

Premium rubber tips for your Capri Tools CP21089 Air Blow Guns

Also compatible with air blow guns using 3/8-24 male fitting accessories

Rubber tips protect delicate surfaces while you work

1/8" male national pipe thread

Maximum pressure of 200 lb per square"

Item Package Dimension: 6.32" L x 4.49" W x 3.39" H

Industrial steel Air plug and nipple kit

Compatible with industrial, "m", "D" And "I/M" Style plugs and couplers

Zinc plated steel coupler features high corrosion resistance and long life

1/4" female national pipe thread

Maximum air pressure of 150 pounds per square inch

Not for use with inflator gauge

STRAIGHT MANIFOLD - Milled red aluminium body with nickel plating steel quick connectors for added durability and a leak free fit. The manifold body is made of high corrosion resistant anodized aluminum, making them stronger and 50% lighter than standard fittings.

COUPLER AND PLUG - 1/4" I/M type coupler and plug are made of nickle plated steel with anodized aluminum sleeves. The steel plug is heat treated to reduce abrasion on critical mating surfaces. Couplers are designed for high corrosion resistance, longer life and smoother operation.

INTERCHANGEABLE - Hromee air manifold kit has an aluminum In Line style with an inlet of 1/4 inch NPT and 4 outlets of 1/4 inch NPT sizes. It is compatible with Industrial "M", "D", and "I/M" type plugs and couplers. The max working pressure is 300 PSI.

【What In The Box?】 This industrial air blow gun along with brass adjustable air nozzle, 2 pcs steel air flow extensions, 1 pcs universal extended air blow hose and 1 pcs 1/4'' standard male quick plug. Which is a must-have blower gun tool for your cleaning project of narrow gaps, inside pipes, inside machine parts or precise instruments.

【Strong Air flow】 This pneumatic air gun with new design inner supercharging construction and tapered air flow nozzle for high volume powerful blow-off, effectively reduce air consumption when air flows. Max working pressure is 150psi, superior to normal air blow guns on the market.

【Quality Made】 Premium air blower gun constructed with anti-break silvery chromed zinc alloy gun body, brass connector steel air flow extensions, solid 1/4'' standard male quick plug, all these quality parts make and ensure a reliable and durable air blower tool, will definitely serve you faithfully for years!

PVC material is designed for long life and light weight for your DIY projects

17 pieces air tool accessories kit, include all necessary air tools and air fittings.

Double 1/4" MNPT, Max working pressure of air compressor Hose is 300Psi

Includes (19) essential air accessories and 25ft recoil air hose

With double 1/4" MNPT Nylon hose, Max working pressure is 200PSI

Heavy duty dual tire chuck for tire inflation and pencil tire gauge ensures tire properly inflator