Best Pressure In Compressor Switches in 2026

Designed for use with Ingersoll Rand reciprocating air compressor models: SS3 and SS5

100 psig cut-in, 135 psig cut-out

NEMA type 1 enclosure

Designed for use with 5 HP single phase Ingersoll Rand reciprocating air compressor models including the 2340 and TS4

135 psig cut-in, 175 psig cut-out

Includes unloader valve

【Product Description】This is a pressure switch, control valve with a single port connection manifold,This single port pressure switch is an excellent replacement for damaged or old pressure switches.

【Application Areas】This universal pressure switch is suitable for 90-125 Psi 26A air compressor.

【Switch Features】This is similar to the regular single port pressure switch, Not only this switch is equipped with heavy duty 26A contacts but also to provide a longer lasting switch in demanding applications, is your best choice.

Designed for use with most three phase Ingersoll Rand reciprocating air compressor models including: 2340, 2475, 2545 and 7100. Also compatible with 5-7.5 HP single phase 2475 models.

135 psig cut-in, 175 psig cut-out

Includes unloader valve

【Product Name】Pneumatic Air Compressor Pressure Switch Control Valve

【Premium Quality】Made of solid plastic case and aluminum alloy, excellent performance and stability, Thread Size : 1/4"

【Red Switch】There is a red ON/OFF switch knob for automatic control, CUT-ON Pressure 90 PSI - CUT-OFFPressure 120 PSI,Easy to operate.

✅[Size]: This pressure switch features a 6.3 mm unloader valve connection and a 1/4 inch NPT Female connection. The factory-set cut-in and cut-off pressure range is 95-125 PSI. With a relief valve, it can avoid the overload operation of the air compressor.

✅[Part numbe]]r: The part number for this pressure switch is LF10-4H-1-NPT1/4-95-125. It is designed for use with a single stage or two-stage air compressor that pumps up to 125 PSI.

✅[Convenient to use]: The four-port manifold gives you the flexibility to mount the switch in any direction and add a relief valve, gauge, or multiple air outlet ports.

Replace Part Number :5140112-24

Compatible with Models : CPFC2TV3525VP Type 1 & 2 , 919-16771 , 919-167780 , 919-167781 , 919-725500 , 919-728500 , 919-728501 , 1WC95-0 , 1WC95-1

Pressure Setting Adjustable From 145-175 PSI

Replace Part Number : CW219300AV

Cuts in at 120psi - Cuts out at 155psi.

1/4" Quick disconnect fitting for check valve line,¼” FNPT Inlet 4 Port.

Suitable replacement for 2 HPat120v 1 phase, 3 HP at240 V 1 phase or 5 HP at240 V 3 phase

95 to 125 pounds per square inch

Four 1/4" female national thread pipe port manifold

Compatible with INGERSOLL RAND 23474661-C Pressure Switch

Cut-In PSI: 95 Cut-Out , PSI: 125 PSI

Open/Close: 95/125 psi

【VARIOUS APPLICATION】These Pressure Switches are designed for Ingersoll Rand 5 HP reciprocating air compressor, including models 2340L5/N5/D5-V Three Phase, 2475N5/D5-V, 2475N5/D5-P, 2475N7.5/D7.5-V, 2475N7.5/D7.5-P, 2545E10/K10-V, 2545E10/K10-VP, 7100E15-V, and 7100E15-VP models.

【WHEN TO REPLACE】The pressure switch will often need to be replaced if the compressor does not turn on at the lower setpoint or does not turn off at the upper pressure setpoint causing the safety valve on the tank to pop.

【SPECS】The pre-set cut-in pressure is 135 psi and the cut-off pressure is 175 psi. Come with unloader valve & 4 port manifold.

Replace Part Number : 69JF7LY , Z-D PS3535

Cuts in at 95psi - Cuts out at 125psi

Size: 3/8" Connection Type: Female NPT