Best Zymurgoes in 2026

【VARIOUS APPLICATION】This Fuel Injector Puller Tool is designed to remove pencil nozzles used in many agricultural and construction engines such as for Case, Caterpillar, GM, John Deere, Waukesha and White diesel engines.

【EXCELLENT PERFORMANCE】This Nozzle Puller/Remover Tool is designed to remove pencil nozzles on Cat engines.

【EASY TO USE】This tool applies straight even pulling power through a slide hammer assembly. The job is done quickly and without damaging components.

【VARIOUS APPLICATION】This cable is designed for echoMAP 43dv, 44dv, 53cv, 53dv, 54dv, 73dv, 73sv, 74dv, 74sv, 93sv, 94sv; for echoMap CHIRP 42cv, 42dv, 43cv, 43dv, 44cv, 44dv, 45cv, 45dv, 52cv, 52dv, 53cv, 53dv, 54cv, 54dv, 55cv, 55dv; ECHOMAP Plus 42cv/43cv/44cv/45cv/62cv/63cv/64cv/65cv;for ECHOMAP UHD 62cv/63cv/64cv/65cv; for STRIKER 4/4cv/4dv, 5cv/5dv, 7cv/7dv/7sv,for STRIKER Plus 4/4cv/5cv/7cv/7sv/9sv.

【MEGA Imaging+】 Cable connects your fish finder with a built-in MEGA Down Imaging transducer on your trolling motor.You'll be able to scan deeper and wider without sacrificing clarity.

【SUPERIOR MATERIAL】This cable is designed with high-quality waterproof material for long lasting use.

【VARIOUS APPLICATION】These transmission hoses lines are designed for the Cummins 48RE transmission 2003-2007.

【UPGRADE REPLACEMENT】High quality replacement, brand new upgraded design allows you to Get rid of the stock rusty & leaky rigid steel lines.

【PACKAGE INCLUDES】This 48RE Transmission Hoses Lines Kit contains all three lines, namely lines from transmission to heat exchanger, heat exchanger to factory cooler, and cooler back to transmission;Come with 4pcs transmission adapters/fittings.

【Replaces Part Numbers】Refrigerator thermostat for Dometic 3851210025 thermistor sensors.Replaces 2931863035, 2931863076, 3851059042.

【Applicable Model】Compatible with almost all Dometic RM,S,NDR & DM Series Models with two wire thermistor:RM1350 RM2351 RM2354 RM2410 RM2451 RM2454 RM2551 RM2554 RM2607 RM2611 RM2612 RM2620 RM2652 RM2663 RM2807 RM2811 RM2812 RM2820 RM2852 RM2862 RM3807 RM3862 RM3863 RM3962 etc.For S520 S530 S619 S620 S630 S819 S820 S830 S1521 S1621 S1631 S1821 S1831 etc. For NDR1062 NDR1292 NDR1492 etc. For DMC702 DMR702 DM2652 DM2672 Dm2682 DM2683 DM2852 DM2882 etc.

【Excellent Performance】Solve your refrigerator problems, the dometic 3851210025 refrigerator thermistor kit can sense temperature changes in the refrigerator and send a message to the control board Signals, which can easily solve your refrigerator temperature problems. You no longer have to worry about your fridge freezing all your food and not providing the right temperature.

【Fitment】1-1/2 to 3 hp rating for a compressor without a magnetic starter.

【Specs】The pre-set cut-in pressure is 95 psi and the cut-off pressure is 125 psi providing a 30 to 40 psi pressure differential.

【Premium Quality】This PRESSURE SWITCH is made from premium steel, rugged and high temperature resistant. Designed using state-of-the-art technology with the client in mind. It will meet your needs and provide excellent quality at an affordable cost. Easy Installation:

【VARIOUS APPLICATION】These Pressure Switches are designed for Ingersoll Rand 5 HP reciprocating air compressor, including models 2340L5/N5/D5-V Three Phase, 2475N5/D5-V, 2475N5/D5-P, 2475N7.5/D7.5-V, 2475N7.5/D7.5-P, 2545E10/K10-V, 2545E10/K10-VP, 7100E15-V, and 7100E15-VP models.

【WHEN TO REPLACE】The pressure switch will often need to be replaced if the compressor does not turn on at the lower setpoint or does not turn off at the upper pressure setpoint causing the safety valve on the tank to pop.

【SPECS】The pre-set cut-in pressure is 135 psi and the cut-off pressure is 175 psi. Come with unloader valve & 4 port manifold.

【VARIOUS APPLICATION】This Hydraulic Multiplier Kit Compatible with most tractor models, compatible with John Deere, Case, Kubota, for Ford and Massey Ferguson, or applicable for machine using 1/2″ Body ISO 5675/Pioneer Style couplers. Capacity for up to 20 GPM hydraulic flow Up to 3000 PSI hydraulic systems.

【SIMPLE PLUG-IN VALVE DESIGN】Offers quick and easy installation. Can plug directly into tractor’s outlet with custom eccentric fittings adjustable to fit center-to-center dimensions from 2″-2.5″. The switch box control allows you to select circuits 1 and 2 separately or simultaneously.

【SUPERIOR QUALITY】Anodized body and mounting bracket, durable and anti-corrosion. Valves are heavy duty chemical and weather resistant. The industrial-grade enclosure and switch are weatherproof and durable.The 12' wiring harness with weatherproof connectors.

【Replaces Part Numbers】Refrigerator thermostat for Dometic 3851210025 thermistor sensors.Replaces 2931863035, 2931863076, 3851059042.

【Applicable Model】Compatible with almost all Dometic RM,S,NDR & DM Series Models with two wire thermistor:RM1350 RM2351 RM2354 RM2410 RM2451 RM2454 RM2551 RM2554 RM2607 RM2611 RM2612 RM2620 RM2652 RM2663 RM2807 RM2811 RM2812 RM2820 RM2852 RM2862 RM3807 RM3862 RM3863 RM3962 etc.For S520 S530 S619 S620 S630 S819 S820 S830 S1521 S1531 S1621 S1631 S1821 S1831 etc. For NDR1062 NDR1292 NDR1492 etc. For DMC702 DMR702 DM2652 DM2672 Dm2682 DM2683 DM2852 DM2882 etc.

【Excellent Performance】Solve your refrigerator problems, the dometic 3851210025 refrigerator thermistor kit can sense temperature changes in the refrigerator and send a message to the control board Signals, which can easily solve your refrigerator temperature problems. You no longer have to worry about your fridge freezing all your food and not providing the right temperature.

STRONG SUCTION FORCE - This dent puller kit's maximum horizontal suction is 130 lbs, and the maximum vertical suction is 80 lbs.

PREMIUM MATERIAL - The handle of the suction cup dent puller is made of solid ABS which has extremely hardness, is welded to the sucker so firmly that the handle will not break easily, is solid and durable, has a long service time. The soft rubber pad is gentle on dent surfaces and won’t scratch the paint.

EASY TO USE - Clean and heat the dent with hot water, start operation from the shallow concave line then press hard and make sure the suction cup fits seamlessly, gently pull the suction cup up by using the handle, the dent surface will be pulled up with the dent puller.

27 millimeter

Heat treated

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt.

Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications.

Made with heat-treated, impact quality alloy steel.

Gearwrench's off-corner loading design has an open end, stronger grip, reduces fastener rounding, and has up to 25% more torque

Gearwrench's Wrench Set has an off-corner loading design on box end for better grip and reduced fastener rounding

15° offset box end for better access

FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers

WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995)

EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process

The Gearwrench 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs. 30° for standard wrenches

Off-corner loading design on box end provides better grip and reduces fastener rounding

Pass-thru technology works down any length of threaded rod and long bolts

ITEM SPECIFICATIONS: Our Harmonic Balancer Puller Set is designed for removing damper pulleys in tight engine compartments without removing the radiator. The set features an enhanced design for optimal position retention, and the steel construction provides extra strength and longevity with a Black Oxide finish for corrosion resistance.

INCLUDES: This high quality set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 3/8-inch square drive for use with a ratchet and a 3/4-inch hex for wrench or socket use. It also includes a high quality storage case so you'll never have to go looking for a tool again!

COMMON APPLICATIONS: This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.

The Gearwrench Hammer Puller Set provides a wide range of puller applications including flange type axles, oil seals, and other press fit Parts

Jaws can be set up for 2 or 3 jaw internal or external pulling jobs

5-1/2 lb slide hammer has a 5/8-18 thread

Gearwrench's Swivel Spark Plug designs provides better access to hard to reach spark plugs

Off-corner loading design reduces fastener rounding

Magnetic insert holds plug for removal and installation

Expandable and adjustable to reach areas inaccessible to a fixed head tool for improved access

Head rotates 180° through 14 locking positions for unparalleled access and leverage

Compact design allows for work in tight spaces

Gearwrench's Sensor and Sending Socket Set is designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches

Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units

Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units

This tool separates the rubber supports from exhaust hanger brackets.

The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.

The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

Accurately measures wear on all 1/2" pitch bicycle chains

Compatible with most 5-to-12 speed chains

Go/no-go gauge indicates .5% and .75% wear

Yukon Gear & Axle YDGGM8.5-3-30-1 Yukon Dura Grip Differential; 8.6 in. 10 Bolt; 30 Spline; 2.73 And Up;

Quickly Flushes Out Old Grease and Repacks Bearings with Less Mess..Fit Type: Universal

The Handy Packer works on bearings up to 3 1/2" O.D.

The grease stays in the tool cavity, not on your hands. To pack a bearing, place the bearing on the piston.

OTC's 9-Way Slide Hammer Puller Set is ideal for pulling flange-type rear axles and most front-wheel drive hubs

Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals

Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs

Gearwrench's Fan Clutch Service Set covers most vehicles with bolt on pulleys

Also covers newer Chrysler engines with press on pulleys requiring special pins to hold housing

Features the patented universal PULLEY holder

Removes and installs pressed-in type ball joints found on most vehicles

Changes ball joint without removing control arm from the vehicle

Tools can also be used to remove and install U Joints

Designed for oil and grease seals.Fit Type: Universal

Equipment Manufacturer (OEM) part that your vehicle came with.

parts can be challenging.

Pliers for removing electrical relays on most domestic and import vehicles

Offset handle and thin tips allow access to relays in confined areas

Also works on many heavy-duty and industrial applications

Removes Plastic Hold-Down Fasteners.

This tool quickly removes various types of plastic fasteners that hold on weather stripping, radiator shrouds, fender linings, air dams and other plastic or rubber parts

The tool is equipped with a sliding urethane button for use when extra leverage is necessary

Head Adjusts to 5 Positions.

Two hook sizes easily remove most oil and grease seals.

Where clearance is a problem, remove the pin to reposition the head.