Best Wintowin in 2026

Air Conditioner and Fuel Line Quick Disconnect Tool Set makes fuel and AC line repair and replacement easy.

SPEC:7 PC A/C and Fuel Line Quick Disconnect Tool Set includes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", and 7/8" quick disconnect tools.Made of high quality sturdy plastic that will not break easily,easy to use in confined spaces.

Use these disconnect tools when replacing or repairing the automotive aircon or fuel line. NOTE:Not intended for heater hoses

✅Reusable black nylon push rivets,Fairing Push Pins M6 Nylon Push Rivet,Clastic ATV Fender Rivets,Plastic Motorcycle clips

✅Fits for:Universal Motorcycle ATV, such as compatible with Polaris Sportsman 450 500 550 570 600 700 800 850 1000 Rangers RZR 570 900

✅Fairing Fender Rivet Clips Compatible with Suzuki, Yamaha, Honda, and Kawasaki models

【Size】：--Our garden twist tie with a length of 200 meters/656 FT on one reel can meet all your need.It's a twist tie like from a bag of bread or something but you can make it as short or long as you want.These green gardening wires for plants have great flexibility and can be bent to various shapes easily.

【High Grade Plant Tie Material】：--The Plant Twist Ties Wire is made of high quality outer plastic wrapped with inner steel wire, which is flexible, strong ,eco- friendly , reusable and will not rust.

【Easy Cut-To-Length Plant Ties 】:--Convenient built-in cutter, you can cut the twist ties easily as needed length.You only do need to pull wire all the way into the cutter and apply firm pressure to make the cut.Easy to use without hurting hands.

✅ Specification:Flywheel Puller M20 x 1.5 right hand external thread.

✅ Flywheel Puller Used for removal of the flywheel or rotor if applicable

✅ Premium quality high carbon steel.Heat treated for strength and durability.Durable hot black oxide finish

✅ Magneto Rotor Flywheel Puller Remover M24 x 1.5 right hand internal thread.(24mm x 1.5mm)

✅ Replaces for Honda 07AMC-MEBA100, for Kawasaki OEM tool 57001-1565 and for Suzuki K5700-11565-LPT

✅Perfect tool for flywheel removal :Compatible with Honda CRF 450R 02-08, CRF250R/CRF250X 03-09, CRF150R 07-08, Fit for Kawasaki KX 250F 04-10, KX 450F 06-08, Fit for Suzuki RM-Z 250 04-09, RM-Z 450 05-07, Fit for Yamaha YZ 450F 06-13

2-jaw Separator Tool Size: 3 1/2" 2 Jaw

2-Jaw Gear Puller are made of heat treated alloy steel material,strong and durable.

2-claw design makes it easy to remove gears, pulleys, wheel hubs, all kinds of hard to remove parts.

【YOU WILL GET】:-Tire spoon lever iron tool kit includes 3 Pcs Tire Spoons, 3 Pcs Rim Protectors, 7 Pcs Valve Cores, 10 Pcs Valve Caps.1 Pcs Single Head Valve Core Tool,1 Pcs 4-Way Valve Tool

【HIGH-QUALITY MATERIAL】 :-Our Tire lever is Chrome vanadium steel structure can provide strong and reliable durability, anti-rust, weatherproof, beautiful polished chrome finish.The rim protector is made of new and improved nylon material, which has stronger durability and flexibility

【USER FRIENDLY TIRE IRONS】-The motorcycle tire changing tools has an easy-to-grip handle and spoon end, 14.5" Tire Spoons provide better leverage than 11" length tire lever on the market, enhanced lever, very suitable for easy removal of tires, the smooth edge of the spoon, easy to use, and will not squeeze the inner tube

[Model Name]: Flywheel Rotor Magneto Puller Remover Tool 27mmx1.0 Lh Male,Used for removal of the flywheel or rotor of the compatible vehicles

[Flywheel Puller Size]:Threads are 27mm X 1.0 Left Hand Male.

[High Quality]:Constructed from heat treated carbon steel for extreme strength and durability

Easily Disconnects Air Conditioning Lines and Quick Connect Fuel Lines. Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line. Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler. The 5/16" size fits on push lock connectors found on Ford radiators and transmission lines. Easy to use in confined spaces. Set includes six sizes: 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".

Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line.

Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler.

Disconnects Fuel Line and EVAP Line Fittings with Tabs that Must be Depressed to Disengage.

Low-profile design with 85° bend allows the tool to fit between the top of the fuel tank and vehicle.

Works great on Delphi two tab connectors and some import vehicles.

Contains 8 popular disconnect tools for A/C and fuel lines

A complete set of disconnect tools that can be stored in a handy blow-molded case

All disconnect tools are also available individually

Disconnects the 5/16 inch main fuel line from the fuel rail on many Toyota and Nissan vehicles

Hinged design and fully tapered end

Easily inserts into fuel line quick connector, even in hard-to-reach areas

COMPLETE REPAIR KIT: Our tool set provides a comprehensive kit for separating standard sizes of automotive AC hoses and fuel lines, suitable for a large variety of domestic vehicles from Ford, Chevy, Dodge, and more

WIDESPREAD APPLICATION: These rugged automotive tools cover almost every type of fuel line, air conditioning line, radiator hose, and heater hose; our 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", and 7/8" line and hose removers cover all the most needed SAE sizes

EASY TO USE: Our tool kit offers color coded sizing and a variety of widths and lengths so you can always get your job done right; they work with both quick detach and spring lock connections; and custom-purpose tools also cover the unusual requirements of late-model GM trucks, Fords with automatic transmissions, and the special tubing in 4.0L V6 Rangers and Explorers

Easily disconnects air conditioning lines and quick connect fuel lines

Tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line

Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler

The sockets reduce the possibility of fuel leaks and prevent damage to fitting, fuel rails, and fuel line

Package Dimensions: 2.8 L x 18.4 H x 10.6 W (centimeters)

Package Weight : 0.433 kilograms

Wide range of professional automotive specialy tools

Professional grade

Heavy duty design

WHY YOU NEED IT: This Fuel Line Disconnect Tool makes fuel filter replacement easy. The quick disconnect coupler fittings have a locking mechanism inside the outer housing that goes over the lip of the fuel filter while the tool gets under the locking mechanism and releases the inner lip.

APPLICATIONS: This disconnect tool is necessary for Fuel, Heater, and A/C line service on many late model vehicles. Use it to release locking mechanisms on 3/8-inch and 5/16-inch fuel lines on 1989 and Newer GM, 1990 and Newer Ford, and some 1990 and Newer Mazda Vehicles.

TIPS: Relieve the pressure in the fuel line before disconnecting it, and remember to pull on the line after the spring (locking mechanism) has been released. Some Fords have “Blue Clips� (pictured in this listing) which can be released with a screwdriver, but you'll need this fuel line disconnect tool for the other side of the Ford fuel filter.

Practical: Use the ABN Fuel Line Disconnect Scissor Tool for 5/16” Inch and 3/8” Inch GM, Ford, and Mazda Vehicle Fuel Lines for a simple and fast separation of quick disconnect couplings and/or fittings

Versatile: Designed for both 5/16” and 3/8” fuel lines; Compatible with 1989 and newer GM vehicles, 1990 and newer Ford vehicles, and some 1990 and newer Mazda vehicles

Easy to Use: Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job and you can easily pull off the filter

Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more

Smallest size also works on automatic adjusting air suspension systems for automobiles

Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment

These type of fittings are close to the firewall behind the engine and are difficult to turn with very little to hang onto to rotate

They only get worse over time with each heat cycle and deposit buildup

Tool engages the tabs and provides a better grip on the fitting

[WIDELY USE AC & FUEL LINE DISCONNECT TOOL SET]-- A comprehensive disconnect tool set for separating automotive hose and fuel lines, work for almost fuel lines, air conditioning lines , air and oil pipes , radiator and heater hoses , simple push-on & pull-off action.

[DIFFERENT COMPONENTS & SIZES FOR MUTI-USES]--The fuel line removal tool set includes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", and 7/8" line and hose removers, which cover all the most needed SAE sizes.

[DURABLE MATERIAL & HIGH QUALITY]--The 25 pcs fuel line disconnect tool kit made of high-quality aluminum alloy and plastic steel is durable . Each tool , even the carrying plastic case is designed and tested for strength and longevity.

[ Fitment ] : 3/8'' size Compatible with 2003 - 2010 Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS.

[ Fitment ] : 1/2'' size Compatible with Ford Super Duty Trucks, F250, F350 and F450.

[ Material ]：Made of High quality aluminum .

[WIDELY USE AC & FUEL LINE DISCONNECT TOOL SET]-- A comprehensive disconnect tool set for separating automotive ac hose and fuel lines, work for almost fuel lines, air conditioning lines , air and oil pipes , radiator and heater hoses , simple push-on & pull-off action. Widely applied for domestic and foreign hoses and automotive lines, compatible with Most GM Ford Dodge Mazda and Chrysler.

[DIFFERENT COMPONENTS & SIZES FOR MUTI-USES]--The fuel line removal tool set includes 6 pcs of color-coded ac disconnect fuel line removal tool set , 7 pcs of removing ac & fuel line disconnect fittings , 4 pcs of quick ac fuel line remover , 2 pcs of oil cooler line remover as well as scissor fuel line disconnect tool , cf fuel line w/hair pin connector and rubber band. Various common tools are easy for operation to cover different purposes.

[DURABLE MATERIAL & High Quality]--The 25 pcs fuel line disconnect tool kit made of high-quality aluminum alloy and plastic steel is durable . Each tool , even the carrying plastic case is designed and tested for strength and longevity.

COMPLETE REPAIR KIT: Our tool set provides a comprehensive kit for separating standard sizes of automotive AC hoses and fuel lines, suitable for a large variety of domestic vehicles from Ford, Chevy, Dodge, and more

WIDESPREAD APPLICATION: These rugged automotive tools cover almost every type of fuel line, air conditioning line, radiator hose, and heater hose; our 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", and 7/8" line and hose removers cover all the most needed SAE sizes

EASY TO USE: Our tool kit offers color coded sizing and a variety of widths and lengths so you can always get your job done right; they work with both quick detach and spring lock connections; and custom-purpose tools also cover the unusual requirements of late-model GM trucks, Fords with automatic transmissions, and the special tubing in 4.0L V6 Rangers and Explorers

GREAT COMPATIBILITY: 19mm socket specifically design to fit for all Detroit Diesel DD13, DD15 & DD16 High Pressure Fuel Lines.

HIGH QUALITY: Constructed from high standard steel with reinforced and heat treated, resisting rust, corrosion and tear, ensures an unparalleled long lifespan!

ALTERNATIVE NO.: Alternative to W47058090900

OTC's scissors type fuel line disconnect tool makes short work of hard to release fuel line connectors

Super compact, low profile 3-1/2 inch long tool fits in the tightest spaces to release fittings on fuel rails, fuel filters, sending units, and more

Double ended tool accommodates 5/16 inch fuel lines on one end, and 3/8 inch lines on the other

JIC 8 AN 3/4-16 male thread flare to 3/8 inch SAE quick connect female push on fuel line adaptors tube hose connector

Manufacture from high performance lightweight 6061-T6 cnc machined billet aluminum material.

Black Anodized Finish for Durability and Strength

WIDELY USE: This fuel line disconnect tool set for disconnecting fuel lined, automotive ac hose, air conditioning lines, radiator and heater hoses.

DIFFERENT DISCONNECTORS: 6pcs transmission oil cooler line remover.4pcs quick AC fuel line remover. 7pcs fuel line remover for disconnecting 1/4", 5/16", 3/8", 1/2", 5/8", 3/4“ and 7/8" fuel line.

FUEL LINE DISCONNECT SCISSOR TOOL: For 5/16”and 3/8”GM, Ford, and Mazda Vehicle Fuel Lines for a simple and fast separation of quick disconnect couplings and/or fittings.

Use with 5/16 inches, 3/8 inches or 1/2 inches adapters from the Lisle 37000 or 39400 disconnect tool sets

The pliers can also be used to reconnect stubborn lines or connections that are in hard-to-reach areas.

Features a unique design providing extra leverage when disconnecting quick connect coupling air conditioning and fuel lines.

♣【What You Get】: This set includes 3 fuel line hose pliers, a 9 inch fuel filter caliper, a hose pipe clamp clip and a 80 degree disconnect pliers. Buying this set once is more time-saving and cheaper than buying it separately in a retail store.

♣【High-Quality Material】: The fuel filer caliper is cast from high-hardness carbon steel and heat-treated, which is not only high in strength but also durable. The metal surface has a black coating of anti-oxidation treatment, so it will not become dull due to rust. The handle is made of PVC material, can provide you with a comfortable grip, and will not slip easily.

♣【Ergonomic Design】: The spring design of the fuel filer caliper can help you save energy during operation, allowing you to complete the work with one hand. The curved jaws are specially used to remove the connectors on the tubing, which is faster and easier than other tools.