Best Wst in 2026

High speed, stable and shock proof

Metal gear and double ball bearing

Easy to use, long service life

High speed, stable and shock proof

Metal gear and double ball bearing

Easy to use, long service life

【Split Design and High Capacity】Power bank dock station & 8*8000mAh high capacity portable chargers,each power bank contains with 2 built in charging cables which compatiable with universal smartphone .Low battery notifications will be a thing of the past.

【Equip with Stand Function】Aluminum alloy surface, which can be unfold and used as the mobile phone support when you are watching movie or teleplay. Release your hands,when you are watching.

【High Conversion】For our charging kits, we use high-capacity lithium batteries with lithium cobalt oxide cathodes alongside a high-quality chipset .This provides about 80% boost to conversion efficiency.

Includes 5 pieces of cables.

Y Servo Leads are durable, soft and light

10cm lenght.

【UPGRADE & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer to change the torque, speed, angle, etc. The AGF-SPV2/V3 only can be used for AGFRC servo with ASS or PROGAMMABLE mark. Please read the instructions carefully before use.

【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in)

【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot.

【UPGRADE & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/3 servo programmer to change the torque, speed, angle, overload protection, inversion, etc.

【IP67 WATERPROOF DESIGN】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness. With IP67 Waterproof design, which make servo still work normally when water enters into the servo. Size: 40*20*41.5mm (1.57*0.79*1.63in)

【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, IP67 waterproof design, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Ideal for 1/8 1/10 buggy/monster trucks/RC car/boat/plane/helicopter/on road/off road, etc.

【UPGRADED & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer (not Include) to change the torque, speed, angle, etc.

【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in)

【HIGH QUALITY & PERFORMANCE】Standard 55KG high torque servo equipped with patent reinforced steel gear with PINS, three ball bearing, full Aluminium housing with groove surface for fast heat dissipation, accuracy with precision potentiometer.

Ultra Fast / Extremely Strong / Unbelievably Precise!

Metal Gears / Full Ball Bearings / Shockproof

Waterproof / Digital / Brushless

Standard servo

72 oz-in torque

Transit time 0.22 sec/60°

Motor Type: 3 Pole

Bearing Type: Dual Ball Bearing

Speed (4.8V/6.0V): 0.23 / 0.18

A standard servo with the dual bearing difference

For RC cars, boats, and any application where standard servos are used

Weighs just 1.3 ounces, and delivers 44 oz.-in. of torque with 4.8V power

2 Sets 25KG RC Servo, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.

Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell.

The steering servo's Dimensions:1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm); Weight:2.64oz (75g).

▶Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof

▶Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V

▶High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell

DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo

High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life

Copper & Aluminum / Stainless Steel & Aluminum

High Torque - 330 oz-in torque at 7.4V; Speed: 0.17 sec/60°at 6.0V; Output Spline: 25T.

Coreless Motor - Strong explosive force, low noise, fast response speed, high stability, longer life.

Steering Performance - SunFounder High-Torque 330 Servo provides noticeably faster turning speed and works great with TSM equipped vehicles.

【Brand Product】Emax ES08MAII 12g analog servo, high sensitivity, stable and low-noise.

【Excellent Performance】 High precise metal gear, with better accuracy and longer service life.

【Servo Upgrades】Upgraded high torque analog scx24 emax servo, large steering angle. React quickly and accurately.

High quality and high cost performance.

Operating speed: 0.1second/ 60degree ( 4.8V no load)

Operating voltage: 4.8-6V

DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo

High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life

Copper & Aluminum / Stainless Steel & Aluminum

Large Torque - 20KG Servo Motor 20.5kg·cm (284.7oz·in) -22.8kg·cm (316.63oz·in)

High Rotation Support Waterproof- 270 degree rotation. Well controlled from 0 to 270 degrees, and support waterproof.

High Precision - Using dual ball bearings design and advanced potentiometer to make sure the high linearity and accuracy of the servo

Meets the needs of today's demanding pilots

Surface Mount Technology improves reliability in applications where there is vibration

High impact plastic case is designed to withstand minor crashes and the effects of model fuel

DS3218 20KG Large Torque Digital Servo with precision potentiometers,stable,low noise,waterproof: IP66

High-precision metal gears with hard anodizing, CNC aluminium middle Shell, Dual ball bearings

Large Torque&speed – 18.5kg.cm (0.16S/ 60°)@5V,maximum 21.5 kg.cm (0.14S/60°)@6.8V Operating travel:180°（PWM 500-2500μs）

Replacement steering hardware for Traxxas 1/16 scale vehicles

Includes Upper and Lower Steering Arm, Steering Link, Servo Horn, Servo Saver, Servo Saver Spring, Servo Horn Mount and hardware

Replaces damaged or worn steering components

FEATURES: Molded composite plastic construction Steel servo saver spring

INCLUDES: Two Steering Bell cranks Bell crank Support Servo Saver Spring Drag Link Two 3x20mm Shoulder Screws joss 01/13/16 ire/joss

INCLUDES: Two Steering Bell cranks Bell crank Support Servo Saver Spring Drag Link Two 3x20mm Shoulder Screws joss 01/13/16 ire/joss

Motor Type: 3 Pole

Bearing Type: Dual Ball Bearing

Speed (4.8V/6.0V): 0.24 / 0.20

Enhance steering precision, strength, and looks with Genuine Traxxas machined aluminum steering bell crank assemblies

Blue-anodized T6 aluminum

Engineered exclusively for Rustler, Bandit, and the Slash 2WD

Servo saver

Includes horn adapters

Replaces worn or damaged parts

Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof

Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V

High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell

WHY CHOOSE IT: This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy allincrease).This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

WIDE APPLICATIONS: The MG996R Servo model Good performance digital standard servo, compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys.

ELECTRICAL SPECIFICATION: The MG996R Servo Torque at 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.15s / 60 degrees. Recommended voltage: 5V, current use: 3A.

DS3218 20KG Large Torque Digital Servo

25T Adjustable metal servo arm

High performance digital standard servo

【High Precision & Torque】 Advanced linearity and accuracy, stable, low noise, waterproof, dust-proof. The maximum torque of this rc crawler steering servo is up to 32 kg/cm (444.40 oz/in) @ 8.4V and speed up to 0.135sec/60° @ 8.4V.

【Upgrade Version & High Quality】 This upgraded A73CHLW V2 coreless servo uses the upgraded thicker pin shafts and all strengthen steel gears, which is more sturdy and durable and has stronger anti-collision performance.

【Programmable】 This high torque servo is programmable by the AGF-SPV3 servo programmer (not include) to change the torque, speed, angle, inversion, neutral position, etc.