Best Xuanfeng in 2026

Shank Diameter: 1/4" Overall Length: 2"

Cutting Diameter: 1/16" Cutting Length: 1/2"

industrialNano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. quality

Cutting Diameter: 1/16" Cutting Length:1-1/2"

Shank Diameter: 1/4" Overall Length: 3"

Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Best used for: Laminate or veneer-finish plunging and dadoing.

Shank Diameter: 1/4" Overall Length: 2-1/2"

Cutting Diameter: 1/8" Cutting Length: 4/5"

Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

Shank Diameter: 1/4" Overall Length: 2"

Cutting Diameter: 1/16" Cutting Length: 1/2"

Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

Whiteside Router Bits are made with Premium Carbide

Precision ground for proper balance at high RPM

Industrial Quality

Specs: Cut Depth flush, 1/8",1/4",5/16",3/8",7/16",1/2", Number of Cutters 2, Overall Dia. 1-3/8", Overall Length 2-1/4", Shank Dia. 1/4", Carbide Height 1/2"

Each set includes interchangeable bearings and a wrench to cut multiple depths with a single bit

Great for furniture makers, cabinetmakers and carpenters

Specs: Number of Cutters 2, Overall Dia. 3/4", Overall Length 2-3/32", Shank Dia. 1/2", Carbide Height 3/8"

Down shear design on most bits for clean top surfaces

Deep center gullets for fast chip removal

IDEAL FOR EVERY WOODWORKER – 82 Degree Countersink set with Adjustable Drill Bit Depth Stop and No-Thrust Ball Bearing.

SET INCLUDES – Drill bits set includes a countersink bit, a slow spiral, HSS M2 fully ground drilling bit, and a quick-release 1/4" hex shank.

EXCELLENT FOR CUTTING – Use the drill bits for wood-working of Natural Woods, Man-Made Boards, MDF, Chipboard, Plywood, Aluminum/Non-Ferrous, Aluminum Composite Material (ACM), Decking Materials, High Density Polyethylene (HDPE).

Premium Carbide

60° & 90° V groove

15° Detail carving liner

Specs: Bearing Dia. 1/2", Number of Cutters 2, Overall Dia. 1/2", Overall Length 3-5/16", Shank Dia. 1/4", Carbide Height 1-1/4"

Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects

Freud’s Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern

Specs: Bearing Dia. 1/2", Number of Cutters 2, Overall Dia. 1/2", Overall Length 3-5/8", Shank Dia. 1/2", Carbide Height 1-1/2"

Cuts all composition materials, plywoods, hardwoods, and softwoods

Use on hand-held or table-mounted routers

Specs: Number of Cutters 2, Overall Dia. 1-1/2", Overall Length 3", Shank Dia. 1/2", Carbide Height 1-1/4"

Freud Tico Hi-Density Carbide

Clean cuts in solid wood, plywood and composites

RFT5200

Spiral Flush Trim Up Cut

Industrial Quality

RU5150

Up Cut Spiral

Industrial Quality

RU1600

Up Cut Spiral

Industrial Quality

Whiteside Router Bits are made with Premium Carbide

Precision ground for proper balance at high RPM

Industrial Quality

Solid Carbide spiral upcut router bits with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length

The CNC Router Bits is suitable for Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits

(D) Diameter: 1/16

(R) Radius: 1/32

(a°) Angle: 5.4°

Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits

SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action yields a clean accurate cut while the augering action clears chips from the cut.

FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits.

CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate, Melamine, Melamine Particle Board, MDF, Veneered Plywood.

DETAIL SIZE. 1/2 inch shank, 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch overall length

MATERIAL FIT. This router bit is perfectly used for Plywood, OAK, MDF, and any hardwood working(profile cutting), those composites kind material

SPECIAL DESIGN. The UP&Down spiral router bit clean edge on both top and bottom face, design to cut material at full depth in one pass,better than straight bits

RD2100

Down Cut Spiral

Industrial Quality

Whiteside Router Bits are made with Premium Carbide

Precision ground for proper balance at high RPM

Industrial Quality

Whiteside Router Bits are made with Premium Carbide

Precision ground for proper balance at high RPM

Industrial Quality

Cutting depth 1/8 to 1/2-Inch by replacing bearing, 1-3/8-Inch Diameter & 3/4-Inch Cutting Length.

For rabbeting of different size on wood and wood composites.

Anti-kickback design.

Specs: Number of Cutters 2, Overall Dia. 3/8", Overall Length 3", Shank Dia. 1/2", Carbide Height 1-1/4"

Fast chip removal with excellent quality and long life

Use in CNC, hand-held and table-mounted routers

Turn your rotary tool into a powerful cutting machine

Ideal for cutting drywall for electrical boxes, air vents and other wall features

Piloted tip to cut around outlet and switch boxes

Specs: Number of Cutters 2, Overall Dia. 1/2", Overall Length 4-1/8", Shank Dia. 1/2", Carbide Height 2"

Freud Tico Hi-Density Carbide

Clean cuts in solid wood, plywood and composites

For CNC milling and routing on challenging materials where a clean top surface edge of material is required

Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool

For use on CNC, table mount and handheld routers

Specs: Number of Cutters 2, Overall Dia. 3/4", Overall Length 2-1/8", Shank Dia. 1/4", Carbide Height 3/4"

Freud Tico Hi-Density Carbide

Clean cuts in solid wood, plywood and composites