Best Yenuo in 2026

【Installation note】Suitable for 14-16 inch drawers.The space between drawer and cabinet wall need to be 0.75in each at left and right side,total 1.5in ( inside cabinet width - outside drawer width= 1.5in )一 Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level. without mounting screws included,you can purchase different M5 screws according to your specific installation scene.

【MAXIMUM LOAD CAPACITY:250 lb】The slides is made of 2mm thickness high-density Q235 cold-rolled steel plate( tensile strength>400MPa),it will keep your drawers stable and safe even carrying up to 250 lb heavy weight items,which take opening and closing test 150,000 times under full loaded without damage. Note:The shorter the slide,the heavier the weight load.

【30 years service life】The drawer slides' surface are treated with electroplated blue zinc, therefor it's with oxidation resistance and anti-corrosion ability, the service life of the slide rail could be 30 years at least. Our motto is “Use quality slides,live quality life",besides the quality, YENUO also focused on after-sales service,any quality or installing problem please feel free to contact us.

【Installation note】Suitable for 16-18 inch drawers.The space between drawer and cabinet wall need to be 0.5in each at left and right side,total 1in ( inside cabinet width - outside drawer width= 1in ),Slide length:16""(407mm)--Fully extended length:32""(813mm).Quantity: 1 pair(2 pieces)一Mounting screws included.Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level.

【MAXIMUM LOAD CAPACITY: 100lb 】 The slides is made of 1.5mm High - density cold-rolled steel plates,it will keep your drawers stable and safe even carrying up to 100 lb heavy weight items,which take 100,000 times of push-pull tests full loaded without damage,the service life of the slide rail could be 30 years at least.

【Anti-rust & Smooth work 】The anti-rust ability and oxidation resistance of our slides is superior to the others because of the special electrophoretic coating surface treatment; With dual industrial grade bearing ball inside,the drawers slide smoothly even though carrying heavy items; With a rubber crash pad on,which is a wear-resisting and impact-resistant device,the drawers slide quietly without collision noise.

【Installation note】Suitable for 12-14 inch drawers.The space between drawer and cabinet wall need to be 0.5in each at left and right side,total 1in ( inside cabinet width - outside drawer width= 1in ),Slide length:12""(307mm)--Fully extended length:24""(609mm).Quantity: 1 pair(2 pieces)一Mounting screws included.Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level. "

【MAXIMUM LOAD CAPACITY: 100lb 】 The slides is made of 1.5mm High - density cold-rolled steel plates,it will keep your drawers stable and safe even carrying up to 100 lb heavy weight items,which take 100,000 times of push-pull tests full loaded without damage,the service life of the slide rail could be 30 years at least. "

【Anti-rust & Smooth work 】The anti-rust ability and oxidation resistance of our slides is superior to the others because of the special electrophoretic coating surface treatment; With dual industrial grade bearing ball inside,the drawers slide smoothly even though carrying heavy items; With a rubber crash pad on,which is a wear-resisting and impact-resistant device,the drawers slide quietly without collision noise. "

【Installation note】Suitable for 12-14 inch drawers.The space between drawer and cabinet wall need to be 0.5in each at left and right side,total 1in ( inside cabinet width - outside drawer width= 1in )一 Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level. without mounting screws included,you can purchase different M4 screws according to your specific installation scene.

【MAXIMUM LOAD CAPACITY: 150 lb 】The slides is made of 1.5mm High - tension cold-rolled steel plates,it will keep your drawers stable and safe even carrying up to 150 lb heavy weight items,which take 100,000 times of push-pull tests full loaded without damage. The shorter the slide,the heavier the weight load.

【Anti-rust & Smooth work 】The anti-rust ability and oxidation resistance of our slides is superior to the others because of the special galvanized blue sealing surface treatment; With dual industrial grade bearing ball inside,the drawers slide smoothly even though carrying heavy items; With a rubber crash pad on,which is a wear-resisting and impact-resistant device,the drawers slide quietly without collision noise.

【Installation note】Suitable for 10-12 inch drawers.The space between drawer and cabinet wall need to be 0.5in each at left and right side,total 1in ( inside cabinet width - outside drawer width= 1in ),Slide length:10"(250mm)--Fully extended length:20"(500mm).Quantity: 1 pair(2 pieces)一Mounting screws included.Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level.

【High quality,30 years service life】The drawer slide is made of high quality stainless steel with doubled anti-rust effect. The high-density 1.2x thick steel material make the bearing capacity of slides be up to 45kg/100lb. Both of which keep our slides durable and sturdy with 30 years service life at least.

【Double Anti-rust & Quiet sliding】High quality stainless steel, which is with strong corrosion resistance and the best anti-rust ability, make our slides perfect for your home ; Industrial grade solid steel ball inside,which not only minimize frictional resistance to keep the sliding more smooth and quiet,and also effectively increase the load-carrying capacity of slides.

【Installation note】Suitable for 14-16 inch drawers.The space between drawer and cabinet wall need to be 0.5in each at left and right side,total 1in ( inside cabinet width - outside drawer width= 1in )一 Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level. without mounting screws included,you can purchase different M4 screws according to your specific installation scene.

【MAXIMUM LOAD CAPACITY: 150 lb 】The slides is made of 1.5mm High - tension cold-rolled steel plates,it will keep your drawers stable and safe even carrying up to 150 lb heavy weight items,which take 100,000 times of push-pull tests full loaded without damage. The shorter the slide,the heavier the weight load.

【Anti-rust & Smooth work 】The anti-rust ability and oxidation resistance of our slides is superior to the others because of the special galvanized blue sealing surface treatment; With dual industrial grade bearing ball inside,the drawers slide smoothly even though carrying heavy items; With a rubber crash pad on,which is a wear-resisting and impact-resistant device,the drawers slide quietly without collision noise.

【Installation note】 Suitable for 14-16 inch drawers.The space between drawer and cabinet wall need to be 0.5in each at left and right side,total 1in ( inside cabinet width - outside drawer width= 1in ),Slide length:14"(350mm)--Fully extended length:28"(700mm).Quantity: 1 pair(2 pieces)一Mounting screws included.Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level.

【30 Years service life】Equipped with hydraulic spring rebound device inside,which take 100,000 times of rebound tests without damage.These push-to-open drawer slides are different with our another “with soft close function ”one. You need to push a little harder to lock the slide when you close the drawer,so they don't bang shut loudly also.

【Push to Open drawer slides】 With a push to release mechanism, the drawer pops open automatically with just a light push on the front plate of drawer,which release your hand when busy in cooking or carrying and without bending over to open and close the drawer beneath cabinets so long as your knees touch it.

【Installation note】Suitable for 14-16 inch drawers.The space between drawer and cabinet wall need to be 0.5in each at left and right side,total 1in ( inside cabinet width - outside drawer width= 1in ),Slide length:14"(350mm)--Fully extended length:28"(700mm).Quantity: 1 pair(2 pieces)一Mounting screws included.Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level.

【MAXIMUM LOAD CAPACITY: 100lb 】The slides is made of 1.5mm High - density cold-rolled steel plates,it will keep your drawers stable and safe even carrying up to 100 lb heavy weight items,which take 100,000 times of push-pull tests full loaded without damage; It is designed with steel ball bearings on both sides,which keep sliding smooth and quiet under full load, and also effectively Increase the load-carrying capacity of the slides.

【Safe For Children】 “slowly close & without slam shut ”mechanism effectively reduce the risk of bang shutting baby’s finger; With slot and automatic back locking, you need to pull a little harder to open the drawer,which not only prevent the drawer from sliding open casually and also make the drawer hard to pull out for a baby. Both of which make the drawer become safe for your children and create a warm and safe family environment for you.

【Installation note】Suitable for 12-14 inch drawers.The space between drawer and cabinet wall need to be 0.5in each at left and right side,total 1in ( inside cabinet width - outside drawer width= 1in ),Slide length:12"(300mm)--Fully extended length:24"(600mm).Quantity: 1 pair(2 pieces)一Mounting screws included.Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level.

【MAXIMUM LOAD CAPACITY: 100lb 】The slides is made of 1.5mm High - density cold-rolled steel plates,it will keep your drawers stable and safe even carrying up to 100 lb heavy weight items,which take 100,000 times of push-pull tests full loaded without damage; It is designed with steel ball bearings on both sides,which keep sliding smooth and quiet under full load, and also effectively Increase the load-carrying capacity of the slides.

【Safe For Children】 “slowly close & without slam shut ”mechanism effectively reduce the risk of bang shutting baby’s finger; With slot and automatic back locking, you need to pull a little harder to open the drawer,which not only prevent the drawer from sliding open casually and also make the drawer hard to pull out for a baby. Both of which make the drawer become safe for your children and create a warm and safe family environment for you.

Flexible platform of the tool storage allows different combinations

All units of the tool storage organizer can be stacked underneath this unit with durable side latches

Fixed dividers for organization of drills & bits

Color: Red

External Dimensions (W x D x H): 14.2 x 5.9 x 4.8 inches (359 x 150 x 124 mm)

Effective Inner Dimensions (W x D x H): 14.2 x 5.9 x 2.8 inches (358 x 149 x 72 mm)

Color: Blue

External Dimensions (W x D x H): 16.5 x 6.1 x 6.8 inches (420 x 155 x 173.5 mm)

Effective Inner Dimensions (W x D x H): 16.5 x 6.0 x 3.1 inches (419 x 153 x 79 mm)

Removable dividers pf the tool storage are made for organization of small bits

The tool storage organizer has a maximum load capacity of 16.5 lbs

Reliable ball bearing drawer slides for heavy-duty loads

Comprehensive tool set: Includes all the tools you need for most small repairs and DIY projects, from a hammer, pliers and screwdrivers to a tape measure and many more.

Durable and reliable: Heat treated and chrome plated to resist corrosion.

Easy organization: Comes with a plastic toolbox storage case to keep all your tools organized and securely stored.

Maximum Storage Volume - thanks to metal-plastic telescopic handle leaning backwards feature of the tool storage

Push button of the rolling tool chest is made for handle opening and closing for easy storage

Bi-material top handle of the portable tool chest is designed for convenient carrying

[ 20 LOCKS + 2 KEYS ] Baby Child Safety Magnetic Cabinet Locks Work Both for Drawers and Cabinets. Improved Locks Extra Stronger Magnetic enough to keep a house cat or toddles out.Child Proofing Locks with Magnet key control. 3M Adhesive for Cabinets & Drawers - No Tools, No drill, No holes

[ WORKS FOR CABINETS AND DRAWERS ] Extra Stronger Locks work on Max 2 inches cabinets door and work on cabinets and drawers door for Childproof. Use them in the kitchen, bathroom, pantry room, storage area, and bedroom. They"ll even work for a 30 lbs determined dog who gets into the cabinets!

[ INVISIBLE FROM OUTSIDE ] Upgraded Locks install inside cabinets or drawers, completely concealed from children and guests, making your home more appealing, while also providing ideal child protection

Align Sizes: 2.5"(64mm) 3"(76mm) 3.5"(90mm) 3.75"(96mm) 4"(102mm) 4.5"(115mm) 5"(128mm) 6.25"(160mm) handle; The wide size scope of application can satisfied what you different needs.

Function: The Ravinte cabinet template for handles and pulls can help you drill in the right place, make the installation quick and easy.

Clear Plastic Material: With measurement lines, this clear plastic material cabinet pull template ensure that you can see the position through the template and drill holes with accuracy.

EXTRA STRONG GRIP NON-ADHESIVE LINER: non adhesive and tear resistant drawer liners are engineered with the highest quality materials to reduce slipping and bunching in your drawers or cabinet shelves; superior gripping technology keeps both the liner in place on surfaces

KEEP ITEMS IN PLACE: thick and durable Gorilla Grip Drawer and Shelf Liners line your drawers and effectively helps to prevent items from moving and shifting around

REFRESH YOUR DRAWERS AND SHELVES: add a quick refresh to any surface for a beautiful transformation while keeping cabinets and drawers organized; liners also offer surface protection from dirt and debris, and help prevent items from scratching the inner surface of your cabinets

12 LOCKS and 2 KEYS:Vmaisi Baby Proofing Adhesive Magnetic Cabinet Locks, Child Safety for Drawers and Cabinets

WORKS FOR MOST CABINETS AND DRAWERS: Baby proofing magnetic cabinet locks work on cabinets and drawers door for childproof. Use them in the kitchen, bathroom, pantry room, storage area, and bedroom

INVISIBLE FROM OUTSIDE: Cabinet Locks install inside cabinets or drawers, concealed from children and guests, making your home more appealing, while cabinet locks child safety also providing ideal child protection

14x18 in the wall niche recesses easily into most walls; looks great in a bathroom outside the shower or a hallway near a door.

this medicine cabinet alternative features decorative wainscoting backing and no door for beautiful open recessed shelving

use this open in-the-wall cabinet in place of a recessed medicine cabinet and get 1 fixed recessed shelf that yields 2 spacious recessed storage cubbies

Small top organizers enable small parts organization

Geometric lock latches - lock guarantee, enables smooth closing and opening

Package Contents: 1-Piece Tool Box

Non-slip, non-adhesive cabinet liner: Smart Design shelf liners made with non-adhesive material that provides an extra strong grip to keep the liner in place and prevent items from moving on top; feel confident knowing your items will stay organized.

Protect shelves, drawers, or any flat surface: High-quality shelf liners made to protect surfaces from everyday wear and tear; ideal for covering shelves, cabinets, closets, drawers, or other flat surfaces; dimensions: 12 in wide x 10 ft long.

Easy application: Our cupboard liner is easy to cut and apply with no adhesive needed; simply measure and cut your desired size and shape; easily wash and wipe these shelf liners for kitchen cabinets clean with a damp cloth.

🎁 Unique Gifts for Dad: Father's Day Gift for dad, Super bright LED bulbs, 360-degree illumination provides light where most flashlights cannot reach.

🎁 Equipped with LED lights: The square inspection mirror rod possesses 2 LED lights, and the flexible flashlights comes with 3 LED lights. So, picking up things in blind zone is so efficient. As well , The fine workmanship of LED light has a long lifetime. It makes you fit any size of task.

🎁 Specific Application : These sturdy 5 pieces magnetic pickup tools kit is widely used in daily life. The strong magnet can absorb mental items like screws and bolts effectively. Besides, this kit is so handy, portable and easy to carry.

Cushioned shoulder strap

Impact-resistant molded base

Top handles and side handles

Made of a solid construction

Industrial grade extension handle

Does not include interior organizer tray. Interior trays are optional components

Color: Blue

External Dimensions (W x D x H): 7.6 x 4.3 x 2.2 inches (192 x 109 x 56.0 mm)

Effective Inner Dimensions (W x D x H): 7.5 x 3.6 x 1.6 inches (191 x 92 x 41 mm)

Water seal protection with a IP53 rating

Organizer with integrated carry handle for small parts organization

Removable cups for inner customization of small tools and parts

Press-n-Slide buttons adjust lower jaws 2X faster than traditional groove joint pliers

All purpose v-jaws grip on round, flat, square and hex shapes

More groove positions provide the optimum hand location for a better grip on the work piece

SELF-DRILLING POINT: Together, coarse screw threads and a self-drilling point design eliminate the need for a pilot hole

FLAT-HEAD STYLE: Sits flush with material

GREEN CERAMIC COATING: 4-layer coating provides superior rust and corrosion protection

Ten compartments with different sizes to accommodate various tools, nuts, bolts, pliers, and other small objects

Perfect for projects using nuts, bolts, washers, parts, or tools

Will fit inside shallow drawers in standard tool boxes