Best Promark Cabinet Drawer Slides in 2026

Our slide-outs are made to your cabinet’s clear opening width and interior depth. They install in minutes to the cabinet floor/base or existing full shelf with just a Phillips screwdriver. We even include an Install Template, all hardware and pictorial guide for a quick and easy installation! You can watch our short video tutorial, The Installation Process, (at the bottom of the page) for a closer look.

Our slide-out shelves are available in widths between 6 inches and 36 inches and are manufactured in 1/8 inch increments. We offer depths in one inch increments on the ½ inch from 16 ½ inches to 23 ½ inches. Each based on your cabinet’s clear opening measurements. Please review our Measuring Guides included in the images for our detailed measuring instructions. You can also watch our short video tutorial, The Measuring Process, (at the bottom of the page) for a closer look.

Rails: Slide-A-Shelf uses glide rail systems that are easily secured to the flat floor of your cabinet and/or any existing full shelf you currently store items on and come with a full extension rail or with our upgraded soft-close feature.

For use on rolled edge metal tracks with a 21/32 in. x 1-1/8 in

Helps to keep drawers aligned

Mounts to the back of the drawer

★ 6 pairs of 24 inch,mounting screws included (extra screws offered for spare use). Attention: the mounting brackets are not included,please buy separately if need it.

★ Side mounted Steel ball-bearing action creats silent working.24'' in length.1.77'' in width.0.5'' in thickness.

★ Zinc Plated and made of solid cold rolled steel.Rust resistant for your lifetime use.

Made from stamped steel with a zinc plated finish

Rated for heavy-duty use (loads up to 100 lbs)

Ball bearing functionality ensures smooth opening and closing action

★10 pairs of slides per case

★ 22" Full Extension Side Mounted Slides （Actual size 21 1/2", extended size 43")

★ Ball-bearing action creates silent glide-motion

5 pair,14 inch,Mounting screws included.Attention: the mounting brackets are not included.

Made from high-grade cold rolled steel that is electrom zinc plated.

Steel ball-bearing action that offer less noise at closing and opening

2 pair of drawer slides, enough for 2 drawer, 14inch, Mounting screws included screws included. (Note: the mounting brackets are not included.)

Made from high-grade cold rolled steel that is electrom zinc plated.

Steel ball-bearing action slides that are ensure smooth and quiet performance.

10 pair,14 inch,Mounting screws included. Attention: the mounting brackets are not included.

Made from high-grade cold rolled steel that is electrom zinc plated.

Steel ball-bearing action that offer less noise at closing and opening.

HIGH QUALITY REPLACEMENT – Broken furniture? Don’t toss it – fix it! This Slide-Co 223887 Drawer Track Guides and Glides pack is the perfect fit to fix your drawer system on a variety of furniture items.

EACH KIT INCLUDES – 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides, and 8 Phillips drive, pan head screws for installation of guides.

PERFECT FOR FIXES – Whether you’re fixing a dresser drawer system or restoring a vintage hutch, these 223887 drawer track replacement guides and glides are a quick and inexpensive fix.

Mounting: Side Mount, Material: Cold Rolled Steel; 1Pair. Matching screws included

Length: 14in(350mm), thickness:1/2in(12.7mm), Width: 1 3/4in(45mm), Load capacity: 78LB

Includes left and righ hand slide, can be rear mounted with the brackets. The sildes and brackets are sold separately

Made from stamped steel with a white epoxy finish

Self-closing functionality ensures that drawers stay firmly closed

Rated for normal-duty use (loads up to 50 lbs)

【100lb Load Capacity & 30 Years Service Life】— Cold rolled Q235 steel made.The max load capacity is up to 100lb.After professional institutions testing,the open-close times reached 100000 times.

【Full Extension & Ball Bearing Design】— 3-setions fold is convenient to fully open the drawer for easy access.Ball bearing design ensure drawer slides smoothly and silently.

【Double Anti-Rust Strength & Detachable】— Zinc Plating finish for anti-rust which is twice the traditional ordinary glides.Snap-on design makes the slides separate Easily,convenient to remove and install the glides.

Made from high-grade cold rolled steel that is electron plated

100-Lbs max weight capacity

Length: 14-inch (355mm)

28" Accuride Full Extension Ball Bearing Drawer Slides

Included: 1 Pair - Weight: 5.0 pounds - Size Specs: 28"L x 0.5"W x 1.8"H - Finish: Zinc

100 lb. Full Ext. Steel Ball Bearing Slide - Hold-in Detent prevents drawer roll-out & bounce-back

Country of Origin:China

Package length:16.2"

Package width:3.8"

※ What you get: You would get 10 pairs of 14in drawer slides, enough for 10 drawer, mounting screws and instruction which make installation easier. Each drawer slides wrapped individually with fine package. Moreover, you would get smoother drawers

※ Material ：LONTAN drawer slides are made of high grade cold-rolled steel with zinc plated finish, heavy-duty and durable. Solid ball bearing ensure sooth opening and closing, can serve you many years. You would feel the quality when you receive.

※ Double Anti-drop: LONTAN soft close drawer slides have double anti-drop function. It would prevent drawer separate from cabinets. Easy to take down and clean

Featuring soft-close functionality to close any drawer softly and silently

Rated for normal-duty use (loads up to 50 pounds)

Full extension opening allows for the entire drawer to be accessed

★Made from high-grade cold rolled steel, zinc plated, steel construction ball bearing full extension slides are rated for heavy-duty use(loads up to 100 lbs)

★Size(folded): 55*4.5*1.2cm(L * W * H), Detailed instructions and mounting hardware included for easy installation (additional brackets needed for face-frame drawer construction)

★Steel ball-bearing action slides that are ensure smooth and quiet performance, featuring soft-close functionality to close any drawer softly and silently

Complete Kit for 6 drawer boxes

Full Extension with exceptionally smooth soft close

Fits 1/2" to 5/8" Drawer side thickness

Interior Drawer Bumpers for cabinets with white finish

Prevents runner on interior drawers from marring cabinet doors

High strength nylon to prevent scratching surfaces

Measurement: 20inch in length.53mm in width.19mm in thickness.250 LB load capacity.Full extension.Note:screws and brackets are not included.

Premium Quality: 2.0mm thickened steel in zinc plated finish.Cold rolled steel has strong moisture resistance,preventing it from rusting.Durable for use.

Silent Design: The nylon rubber at the end can offer less noise when it's on use,providing your family a silent home.

【Installation note】Suitable for 16-18 inch drawers.The space between drawer and cabinet wall need to be 0.5in each at left and right side,total 1in ( inside cabinet width - outside drawer width= 1in ),Slide length:16""(407mm)--Fully extended length:32""(813mm).Quantity: 1 pair(2 pieces)一Mounting screws included.Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level.

【MAXIMUM LOAD CAPACITY: 100lb 】 The slides is made of 1.5mm High - density cold-rolled steel plates,it will keep your drawers stable and safe even carrying up to 100 lb heavy weight items,which take 100,000 times of push-pull tests full loaded without damage,the service life of the slide rail could be 30 years at least.

【Anti-rust & Smooth work 】The anti-rust ability and oxidation resistance of our slides is superior to the others because of the special electrophoretic coating surface treatment; With dual industrial grade bearing ball inside,the drawers slide smoothly even though carrying heavy items; With a rubber crash pad on,which is a wear-resisting and impact-resistant device,the drawers slide quietly without collision noise.

★ 10 pairs of 18 inch,mounting screws included (extra screws offered for spare use). Attention: the mounting brackets are not included,please buy separately if need it.

★ Side mounted Steel ball-bearing action creats silent working.18'' in length.1.77'' in width.0.5'' in thickness.

★ Zinc Plated and made of solid cold rolled steel.Rust resistant for your lifetime use.

【Installation Guide】Length: 9.84"(250mm), full extension lengths: 19.6"(498mm). Left side mount clearance: 0.5" (12.6mm), right side mount clearance: 0.5" (12.6mm). There are 8 screws in the card box at both ends of the product.please push the inner ball bearing to the top of the slide rail first, then connect it with the slide rail. There are electronic installation instructions at the bottom of the link.

【30-year service life】 Two sets of solid steel balls are used inside the ball bearing drawer slide rail to ensure smooth opening and closing of the slide rail. After testing, the number of smooth opening and closing of the slide rail has reached more than 100,000 times.

【Double anti-rust】 The surface of the drawer slide rail is galvanized, which isolates the direct contact between water and air, prevents the slide rail from oxidizing and rusting, and improves corrosion resistance.

True Kenlin parts produced by the Kenlin mfg

Lot of 6 complete sets of Rite-Trak I

Includes 6 of each of the Kenlin Rite-Trak I Rectangular Drawer Guides and 6 Drawer Stops.

Complete kit for face frame or frameless application

Four-dimensional adjustment

Elongated holes for depth adjustment & bottom mount holes

【Installation note】Suitable for 14-16 inch drawers.The space between drawer and cabinet wall need to be 0.75in each at left and right side,total 1.5in ( inside cabinet width - outside drawer width= 1.5in )一 Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level. without mounting screws included,you can purchase different M5 screws according to your specific installation scene.

【MAXIMUM LOAD CAPACITY:250 lb】The slides is made of 2mm thickness high-density Q235 cold-rolled steel plate( tensile strength>400MPa),it will keep your drawers stable and safe even carrying up to 250 lb heavy weight items,which take opening and closing test 150,000 times under full loaded without damage. Note:The shorter the slide,the heavier the weight load.

【30 years service life】The drawer slides' surface are treated with electroplated blue zinc, therefor it's with oxidation resistance and anti-corrosion ability, the service life of the slide rail could be 30 years at least. Our motto is “Use quality slides,live quality life",besides the quality, YENUO also focused on after-sales service,any quality or installing problem please feel free to contact us.

Features a 100 lb. load rating class

Applications include wood residential and commercial furniture, kitchen and bathroom cabinets, and store fixtures

Durable steel construction for years of use

★ 2 pairs of 16 inch,mounting screws included (extra screws offered for spare use). Attention: the mounting brackets are not included,please buy separately if need it.

★ Side mounted Steel ball-bearing action creats silent working.16'' in length.1.77'' in width.

★ Zinc Plated and made of solid cold rolled steel.Rust resistant for your lifetime use.

16 Inch,10 pairs and screws included.

1.77'' in width.0.5'' in thickness.100 LB load capacity.Full extension.

Zinc plated finish.Cold rolled steel prevents it from rusting. Durable for use.