Best Esun 3D Printing Filament in 2026

1KG net (approximately 2.2 lbs) Filament with Clear or Black Spool

eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.

1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)

1KG net (apximately 2.2 lbs) Filament with Clear Spool, Solid Opaque Fire Engine Red color

eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 17 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver, solid fire engine red

1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)

【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.

【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market

【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect.

【 Easy to Print】PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness, not easy to break. low shrinkage, no deformation, no cracking, high printing precision. Made with starch raw materials derived from plant resources, ideal for indoor printing.

【High Speed Printing】Meet the demands for high-speed printers. Continues consistently outstanding performance at high speeds. Compatible with Bambu Lab X1 / X1C / P1P ,Creality K1 / K1 Max and AnkerMake M5.

【Tangle Free & No Plugging】Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.

Industry's first 3D cleaning filament

Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius.

Cleans the extruder's interior by removing accumulated residual filaments.

【Flexible TPU-95A】Hardness 95A. Strong Flexibility. High Resilience. Elongation at break ≥800%. High Transparency. High Impact Strength. Wear Resistance. Tear Resistance. Inflection Resistance. Resistant to Oil, Solvent and Scratches. Weather Resistance. Chemical Resistance.

【Good Flexibility】Flexible TPU is durable and stretchable thermoplastic polyurethane. Its shape can be changed by external force and bounce back when the force disappears. Soft TPU-95A filament of high elasticity is easy to print and offers excellent layer-to-layer bonding.

【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, no deformation, easy handling, resulting in an outstanding surface finish and are highly precise.

【Cleaning Filament】Environmentally Friendly and Non-toxic. Keep your 3D printer nozzle in good health, clean between different material and color changes to extend nozzle life.

【Prevent from Clogging】Designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament. It can clean a variety of 3D printer materials.

【Easy to Use】Wide Cleaning Temperature Range 160°C-300°C. Clean the nozzle and extruder of 3D printer regularly, ensure feed smoothly and constantly without clogging.

Silk Like -- Gorgeous Silk Finish

eSUN Silk PLA 3D Printer Filament Vacuumed Sealed With Desiccant.

1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)

【PETG Filament】Excellent Clarity, Light Transmission and High Gloss. Waterproof. High Toughness. Good Impact Resistance. Good Mechanical Strength. Weather Resistance. Chemical Resistance. Good Stability. Combines the advantages of PLA and ABS.

【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, easy handling, resulting in an outstanding surface finish and are highly precise.

【Tangle Free & No Plugging】Total Length: 350-355m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.

【ABS+ Filament】ABS+ is an enhanced version of Ordinary ABS, cracking and warping has been significantly improved when printing large-size items. It has high strength, better toughness, excellent impact strength, wear resistance and heat resistance.

【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, easy handling, resulting in an outstanding surface finish and are highly precise.

【Tangle Free & No Plugging】Total Length: 410-425m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.

3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid wasting of shipping..

eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.

1KG net (apximately 2.2 lbs) Filament with Clear Spool, Fire Engine Red, Pantone 199C

【Delicate Matte PLA】With excellent matte printed surface, eSUN Matte PLA has better printing effect and doesn't have obvious layer lines than normal PLA. Not easy to break. Supporting structure of it is easy to peel off.

【High Toughness & Better Adhesion】Compared to normal PLA filament, eSUN Matte PLA has higher toughness.Printed models are not easy to break or crack, which can be widly used in accessory, home decoration, toy, sculpture, shell and COSPLAY. With upgraded paper reel, eSUN Matte PLA has better adhesion and printibility which improves the problem of bottom adhesion on the plate.

【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, easy handling, resulting in an outstanding surface finish and are highly precise.

【Low density & High Foaming Volume Ratio】ePLA-LW has applied active foaming technology to achieve lightweight, low-density PLA parts. The highest foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. Density is only 0.54g/cm3.

【Clog-free & No Warping & Less-tangle 】Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping.eSUN ePLA-LW filament is orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.It does not overlap or tangle,no cracking. It has an excellent printing successful rate for large printing models and don't need a constant temperature chamber.

【Easy to Paint & Wide Application】eSUN ePLA-LW lighweight PLA filament is very easy to paint and has a strong adhesion of surface paint. So it is a good choice for model airplanes, drones, and COSPLAY props.

【Designed for High Speed Printer】Under same model and printing time, eSUN PLA HS can print 3-5 times faster at a speed of 250mm/s than ordinary PLA at low speed of 50mm/s. Printing efficiency can be increased by 300% with high speed 3D printers after test.

【High Compatibility】Compatible with Bambu Lab X1/ X1C and P1P/ AnkerMake M5/ Voron 2.4 / Flsun V400/ Creality K1/ K1 Max and Ender 7/ Raise 3D Pro 3 and RMF500.

【High Precision & Smooth Extrusion】eSUN PLA HS can maintain the printing quality and retain the integrity of the complete fine structures without layer lines and deformation while printing in high speed. Also, it has extraordinary bridging and overhang performance with smooth surface.

【Water Soluble PVA】Water-soluble Polymer. Excellent Water Solubility. Easy to Peel off, Will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex Prints!

【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, no bubbles, extremely high successful rate, resulting in an outstanding surface finish and are highly precise.

【Tangle Free & No Plugging】Full 0.5KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle, less stringing, strong layer adhesion. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.

🍀【Keep Filament Dry during 3D printing】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.

🍀【Comprehensive dust-proof,moisture-proof】 It adopts fully sealed process,excellent sealed protection,no impurities,which solves the problems of PLA and other consumables directly exposed to the outside and easy to get dust and moisture, which increase the life of consumables.

🍀【Compatible with 99% of 3D Filament Spools】Suitable for consumable tray with diameter less than 20cm*7cm and and w orks perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm. In the meanwhile,it Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC .

【Safer & Ultralow Odor】Esun PLA Plant-based Resin are made of PLA Bio-based Lactic Acid, lower smell & irritancy, no harmful chemicals, which makes the entire experience much more enjoyable.

【Low Shrinkage & High Precision】A professional resin is designed for LCD, reducing volume shrinkage during the photocuring process, which ensures the high precision of the print model with a smooth finish.

【 Resin for Monochrome Screen Printer】eSUN high precision eResin PLA Pro is designed especially for large build volume printing.Compatible for monochrome screen printers and color screen printers' printing without residue or film or sediment.High successful printing rate.

【Mechanical Properties】-- Tensile strength (X-Y): 31.9 ± 1.1 (MPa), Elongation at break (X-Y): 6.8 ± 0.9 (%), Bending modulus: 1174 ± 64 (MPa), Bending strength: 53.7 ± 2.4 (MPa), Charpy impact strength: 5.1 ± 0.3 (kJ/m2)

【Clog-free & Bubble-Free】-- Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience. Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the PETG filament from moisture. As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result

【Less- tangle and Easy to Use】-- Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed; Larger spool inner diameter design makes feeding smoother

【Toughness Enhanced PLA filaments】OVERTURE PLA Professional is an advanced PLA filament with similar stiffness as regular PLA and dramatically improved fracture toughness (Charpy Impact Strength 13.4+/-1.2 kJ/m2, 5 times tougher than regular PLA). Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness

【Clog-Free, Bubble-Free & Easy-to-use】Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Overture PLA Plus Rolls. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag, no bubble and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking

【Dimensional Accuracy & Consistency】--- Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy (99%) + / - 0.03 mm without any exaggeration; 1 kg spool (2.2lbs)