Best Adhesive Primers in 2026

A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray.

KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere.

Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint.

Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals.

Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces.

Bonds to "hard-to-coat" surfaces and can be top coated with almost any product.

Interior/exterior use on new or previously painted drywall, concrete, wood, masonry, metal and glossy or difficult surfaces

Water-based formula seals uniformly and will stick to surface without sanding

Dries to the touch in 35 minutes, ready to topcoat in 1 hour and covers up between 87-112 sq. ft. per quart

Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals.

Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces.

Bonds to "hard-to-coat" surfaces and can be top coated with almost any product.

Prepares surfaces of press-fit applications such as bottom brackets

Accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound

Essential for all surfaces that contact carbon fiber

PRIMER | CLEAR SEALER | BONDING PRIMER: A high-performance clear primer that is formulated to bond and seal porous and chalky interior and exterior surfaces with a tough, flexible, and breathable clear coating. KILZ Klear is an alkali-resistant clear primer and sealer. It helps protect topcoats from "hot" alkali found in masonry, cement and plaster and can be applied to fresh concrete with pH less than 13. Incredibly versatile, KILZ Klear primer can be used to seal porous surfaces and promote adhesion with a transparent flat finish that is particularly effective for same color painting.

ADVANCED FORMULA: This incredibly versatile styrene acrylic primer can be used to seal porous surfaces and promote adhesion with a transparent flat finish that is particularly effective for same color painting. It is an alkali-resistant clear primer and sealer that helps protect topcoats from "hot" alkali found in masonry, cement and plaster and can be applied to fresh concrete with pH less than 13. Easy soap and water cleanup.

MULTIPLE SURFACES: Suitable for sealing torn drywall facing paper, dried wallcovering adhesive, ‘hot’ joint compounds, concrete and stucco. Use on interior and exterior surfaces including drywall, plaster, wood, galvanized, aluminum, architectural plastics, masonry and brick. Prepare surfaces free of dust, grease, chalk, rust and peeling paint. Works with oil, alkyd and water-based paints.

Easy to Use: Even for beginners, this primer is easy to use! Just brush it on and let it dry.

Eco-Friendly Ultra low VOC and water-based - contains NO harsh chemical additives such as phthalates, formaldehyde, heavy metals, or solvents.

Dries Clear: This is a bonus especially if you’re painting a piece of furniture that you would like to later distress. The clear finish means you’ll see the original wood tone underneath when distressing instead of white or grey primer.

100% acrylic primer that provides strong sealing properties to a variety of interior & exterior surfaces

Easy to apply

Powerful adhesion and stain blocking properties

HIGH-PERFORMANCE BONDING AGENT - Liquid Rubber Multi-Purpose Primer improves adhesion to a variety of substrates, especially to wood and concrete

HIGH-PERFORMANCE BONDING AGENT - Liquid Rubber Multi-Purpose Primer improves adhesion to a variety of substrates, especially to wood and concrete

USE ON - Numerous surfaces including concrete, wood, high-density polyethylene, and more! Our Multi-Purpose Primer is freeze/thaw stable as well as fast drying

Use on peeling or worn interior or exterior surfaces including wood, metal, concrete and more

Triple-thick formula penetrates and bonds with cracked or peeling surfaces to glue down edges and fill in gaps for a smooth finish

Dries to the touch in 30 minutes, can be recoated in 2 hours and covers between 12-50 sq. ft. per quart depending on surface porosity

Latex floor primer for FloorPops peel and stick floor tiles

Surfaces must be sound, dry, clean, and free of all contaminants

Use at full strength - do not dilute

Item Weight: 3.7 lb

Country of Origin: United States

Brand name: Rust-Oleum

5 gallon container

Color = dries Clear

Coverage = 5 gallons per 1000 sq./ft

For absorbent concrete, wood*, gypsum* and non-water-soluble adhesive residue on concrete.

Concentrated primer – dilutes with water.

Seals the substrate.

✔️Item: Primer N 7649

✔️Container Size - Adhesives: 4.5 oz

✔️For Use on Adhesive Type: Anaerobic Adhesives

1 Gallon

Coat right over peeling paint

Low VOC

Magnetic Paint That Makes Any Surface Hold Magnets!

ATTACH: Child artwork, magnetic letters, posters, documents, reminders and post cards using magnets!

CREATE: Magnetic photo gallery walls!

ADHESION PROMOTING - Dries clear, with a strong permanent tack to improve adhesion on surfaces like glass, tile, ceramic, sealed wood panelling, mirrors, and more.

IDEAL FOR HEAVYWEIGHT WALLCOVERINGS - Improves tack, helping to create a strong durable bond for even the heaviest wallcoverings.

ZERO VOC - As calculated per EPA Method 24.

Enhanced adhesion on a wide variety of substrates

Easy to applyUsage:

Sika Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated

MAKES: Any Surface Hold Magnets!

ATTACH: Child artwork, magnetic letters, posters, documents, reminders and post cards using magnets!

CREATE: Magnetic photo gallery displays