Best Amp Meter Gauges in 2026

Test range: Voltage: DC 6.5~100V; Current: 0~100A; Power: 0~10kW; Energy: 0~9999kWh

Store energy data when power off (can be reset to 0). The blue backlight can be turned on/off manually

With overload alarm function (If active power is larger than threshold, backlight and power value will flash)

Replaces: 03601AB1, 515521M91, 515521M91GV, 536229R1, 536229R1GV, 536229R91, 360053R91, 378424R91, 393334R91, 70254407GV, 03601AB1GV, A0NN10670AGV, JTA30GV, 1073455M91, 2393020, 240987, 266004, 70254407, AONN10670A, FAD10850A, JDA30, JTA30

30-0-30 Amperes, Non-Luminous, For 2" Diameter Hole

Fits: Allis Chalmers Tractor 170, 190, B, C, D10, D12, D14, D15, D17, D19, D21, WC, WD45, WF; Case Tractor S, SC, SO, VA; Ford Tractors: 2N, 600, 700, 800, 8N, 900, 9N, NAA/Jubilee; International Harvester Industrial Tractor 2400A, 2500A; International Harvester Tractor 454, 464, 574, 674, Cub, Cub 184; Massey Ferguson Tractor MF165, MF35, MF50, MF65, MF85, MF88, Super 90, TO35

Measuring range -- DROK voltmeter ammeter voltage range is AC 60-500V, current range is 0-200A.

Clear color display -- the multimeter can clearly display voltage and current at the same time, red for voltage, green for current.

With precise CT -- DROK volt amperage meter is equipped with CT, no need to buy another. Can be installed on anywhere flexibly.

Standard 2" black dial for a 2-1/16" opening

60-0-60 Amp scale with a 60 degree sweep

Features a black bezel with removable black mounting panel

100% Brand new and high quality

Used to measure the voltage of automobile power.Measurement range is 8~16V.

Numbers and pointer clearly show the voltage.Orange light on the dial for easy reading in the darkness.

2-in-1 current voltage meter, real time monitoring battery of vehicles, remind you of charge or replacement in time, better avoid emergent dead battery at starting car engine!

High temperature resistant,Made of Eco-friendly & flame retardant durable ABS plastic and good conductivity pins with black matte surface treatment, wear and tear resistant for long lasting durability,CE Certification.NOT WATERPROOF

Manual:This is the only 2-in-1 current voltage meter that didn't come with Installation Notes,but We show the wiring diagram in the product picture.And is very easy to Install.Require external power supply; with reversed connection protection

With small size(48 x 29 x 21mm ),wide measuring range(DC 0-100V; 0-10A) and high accuracy(1% (± 1 digit)).

Display voltage and current simultaneously in different colors, red for voltage, blue for current.(the current is measured in the negative rail).

Require external power supply;With reversed connection protection.

-2" ammeter gauge; Measurement Range: 8~30V; Voltage: 12V; Scale: 60 - 0 - 60

Back-Lit for night operation

Includes mounting bracket, lighting and mounting hardware

❥【CHARACTERISTIC】1 Display Voltage and current simultaneously in different colors, red for Voltage, Blue for current (the current is Measured in the negative rail). 2 Require external power supply; with reversed connection protection. 3 Ground wire of testing end and power supply terminal is the same wire; quick refresh of about 500 MS/time. 4 With built-in shunt, has Voltage and current calibration potentiometers.

❥【WITH MINI SIZED】48 x 29 x 21 mm, wide measuring range(dc 0-100v; 0-10A) and high accuracy percent (± 1 digit).

❥【WIDE APPLICATION】 Eiechip dc voltmeter ammeter has handy connection and wide application, for example, it can be applied to monitoring storage battery, DC adjustable power supply, or voltage and current changing state of other device.

PROFESSIONAL SMOOTH FADE IN / FADE OUT EFFECT: No more abrupt turn on / turn off of your lights. Instead, they slowly increase in brightness when you turn them on, and slowly decrease in brightness when you turn them off.

CHOOSE FROM 13 SPEEDS: From slow to fast, you can choose from 13 different speeds. Simply press the "Speed" button on the dimmer to cycle the fading speeds. The LEDs will flash once to confirm the speed change.

POWER UP TO 2 AMPS: At 12 volts, you can power up to 2 amps of LEDs. An inline fuse is included for circuit overload protection. Input voltage: 12-24V. Output voltage: 12-24V.

✅Round hour meter with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 6 to 80 Volts DC

✅The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy for standard industrial timing and supplying data for the reference of maintenance duration for precision equipment

✅No External Power Required: connect positive to ignition switch and negative to piggy back onto another negative or straight to the negative terminal on the battery

Voltage Measuring range: DC 4.5- 100V

Current Measuring range: DC 0 - 50A（Size:1.89*1.14*0.86in)

Display: 0.28" digital tube, Two colors display: blue and red

Analog Amp Panel Meter Current Ammeter DC 0-100A+Shunt

Scale Range : DC 100A

Overall Depth(Screw not Included): 3.5cm/ 1.4 inch

[Main Parameter] - Model: 85C1A; Measurement Range: 0-10A, Accuracy of Class: 2.5

[Material] - Transparent plastic shell is convenient for you to read scale quickly

[Size]- Meter Panel(Approx): 2.48x2.24x2.17" / 63x57x55mm(L*W*T)

Digital voltmeter ammeter measure voltage DC 4.5V-100V; Operating current 0-50A.

Dual meter panel display is 0.39'' crisp and bright LED screen displays voltage & current value.

Multimeter panel with voltage & current equipped with calibration potentiometer, if there have any error, you can calibrated by yourself.

Dual display: Display Voltage and (+ -) Current at the same time; Power supply: DC 5~100V; Voltage test range: 0~300V; Current test range: ±0~100A

Through-hole design: Easy Wiring; Measure positive or negative current; No current direction limitation

Electrically isolated from high voltage power source which eliminates risk to delicate monitoring equipment and also minimizes safety concerns

60 Amp Ammeter---- This is a Car Pointer Ammeter, the range is 60-0-60A. Including 1 gauge and 1 gauge cover. Support back light at night, practical, useful ammeter gauge for you

Size---- The meter depth from front of panel to the end of the mounting studs is 15" / 16". Outside diameter: 16 inches. Hole diameter: 2"

Easy to Install---- This 12v amp meter display is easy to install, directly install on 2 "cable. Ideal and direct replacement for old or damaged ammeter guage, dependable to use

(Main Parameter)-Model:DH-670; Measurement Range:0-10A Accuracy of Class: 2.0

(Appalication)-Pointer instruments are often used to measure current or voltage, monitor circuits and replace damaged instruments.

(Purpose)-It is widely used in mobile phone maintenance machinery and equipment, power electronic measurement, laboratory measurement and calibration, on-site circuit detection, operation, maintenance and management of power system power plants, substations, data center computer rooms, power distribution facilities, mechanical equipment, ships, aviation, transformers, voltage regulators and other industries.

Two-color digital display(red for voltage and blue for current),bright LED,easy to read.

Voltage measuring range: DC0-100V; Current measuring range: 0-100A(Decimal point move automatically)

Flexible power supply,can use both isolated and non isolated power supply for powering up the meter.

COMPLETE AMPERAGE– Industrial quality LED light signal that give a visual indication of system status at a glance. Range: 0- 100 AMP. Available in red and green.

SMALL SIZE – Versatile and useful for different kinds of industrial installations. Can be used in mount panels, machines and consoles of textile equipment and operating rooms or distribution boxes for ships, airplanes or cities

LONG LIFE – A dustproof base makes sure you don’t have to worry about installation in a dusty environment. Industrial quality components contribute to a product that lasts longer, saving you money in the long term.

Measuring Current Range: DC 0-10V

Accuracy: Class 2.5

Total Height(Not Included Screw): 47mm/1.85"

New Aftermarket Amp Meter, Oil Pressure, Gauge For Case

OEM Part Numbers: 1341333C1,  VT2249, 06161AB

Fits Case Tractors: C, D, L, R, S, VA VAH VAI VAO V VC VI VO 200B

【How to Use】Support back light at night, easy installation.The meter depth from front of panel to the end of the mounting studs is 15" 16".

【Great Replacement】The range is 60-0-60A.2 inch 52mm Car Ammeter Voltmeter 60-0-60A AMP gauge Volt meter for Modificaton suitable for most of car and car modification.

【Easier and Safer】Practical, useful ammeter gauge for you. This is a car pointer ammeter, the range is 60-0-60A

Product Name : Analog Ammeter;Model No. : 44C2-A;Measuring Current Range : DC 0-50uA

Accuracy : 1.5;Panel Size(Approx) : 100 x 80 x 12mm / 3.9" x 3.1" x 0.47"(L*W*T)

Thread Size : Big One: 4 x 11mm / 0.16" x 0.43"(D*L)Small One: 3 x 7mm / 0.11" x 0.27"(D*L);Overall Depth(Not Included Screw ) : 48mm / 1.9"

Specs: Includes Gasket

Compatible with/Replacement for Kubota: 1C010-52032, 1C010-52033, 1C010-52034, Allis Chalmers: 72093848, Case/International Harvester: 296265A1, 1202938C92, 1202938C93, 87802202, 87802238

Compatible With / Replacement For: John Deere 320, 330, 420 Indust/Const, 430 Indust/Const, 435 Indust/Const, 440, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830, A, AO, AR, GM, GN, GW, LI, M, MC, MI, MT, R

Product Name : Analog Ammeter;Model No. : 65C5-A;Measuring Current Range : DC 0-20A

Accuracy : Class 2.5;Meter Panel Size(Approx) : 3.5 x 3.5 x 2.5 inch / 89 x 89 x 65 mm(L*W*T)

Mount Size : 2.7 x 2.7 inch / 70 x 70 mm

How to Use: using this mini multimeter is rather easy, you just need to divide 5 wires into 2 groups, black and red wires for power supply, other 3 wires for measuring voltage and current, please note that the thick black wire is connected to the battery negative and the thick red line is connected to the load negative

LED Display to Read: this volt amp meter adopts 0.28 inch LED display, clear and bright to read, the decimal point can be moved automatically, convenient for you to read the measurement results; Compact in size, it can display both voltage and current at the same time, more convenient and practical

Warm Tip: this voltage meter tester has a power supply range of 4 V-30 V, the maximum input voltage does not exceed 30 V, to avoid the burning risk; The measurement error range is 0.1 percent for voltage and 1 for current

【Premium material】: Grind arenaceous flame retardant material.Over-loaded protection High-precision current and voltage LED display Grind arenaceous flame retardant material.

【Fitment】Waterproof for Car Boat Marine Vehicle Motorcycle Truck ATV UTV.Full-time attention for car battery.

【LED display】: High-precision current and voltage LED display.

Installation Dimension: 52mm(2")

Indicating Range:+/-150A

Working Voltage: 12V/24V

Replacement For New Amp Meter Gauge Fits FARMALL Fits Cub Super A 100 130 140 200 300 Tractors