Best Acdelco Automotive Switches in 2026

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED 19mm Latching Push Button Switch; LED voltage: 12V only, Hole size required: 0.74''/19mm

Latching switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

Technical Specification: Operating voltage: DC 12-24V, max current: 60A, rated voltage: 12V 20A / 24V 10A; operating at 12 Volts: max power rating of 600W, operating at 24 Volts: max power rating of 1200W; operating temperature: -40°C - +105°C, IP65 waterproof rate, with high sensitivity, stablity and strong anti-interference ability.

Automatic Dimmable Function: Newest 8 gang switch panel have automatic dimmable feature, the backlight brightness of the switch panel will change according the brightness of environment. The brighter the environment is, the brighter the backlight will be. The perfect 8 gang switch panel automatic dimmable designed, giving you a different user experience and ensuring your driving safety.

Safety Protection: Our this 8 gang switch panel is built-in solid state relay, not the external relay, provide over-voltage protection, reverse polarity protection, over-current protection, thermal protection, come with additional fuses for replacement, providing all your connected LED lights & accessories work safely.

Perfect Design: Designed to connect and disconnect a DC12V 20A electrical circuit at will, SPST: ON-OFF control; 2 pole design (On/Off), 3rd poles with LED to be connected to earth. Fluorescent lamps will be lighted up when the switch is turned on

Safety Protection: This truck rocker switch control uses copper-plated silver contacts, has good electrical conductivity, and uses high-quality materials and flame-retardant casing for high safety

Easy Installation: Round on-off switch is easy to install, which is just direct setup, and no additional work required, our switch comes with a keyhole slot to prevent unwanted rotation

Connector type: SPST, 2 terminal pin on/off. Power: 15A 250VAC/20A 125VAC

Material: Plastic and metal. Solid connection switch with waterproof rubber cap, more convenient to operate. Delicate appearance with strong construction. Look chic and high-end on your equipment

Mechanical life: More than 50.000 cycles. Electrical life: More than 10, 000 cycles

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 5/8''/16mm

16mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO

AUXBEAM 8 GANG SWITCH: Offers a perfect solution to clean up all wiring harness and add a single panel to control everything. This switch pod with 8 circuits can power all types of 12V/24V accessories, Max power rating: 1200W. Max current rating: 60A, Operating temperature: -40°C +105°C

AUTOMATIC DIMMABLE SYSTEM: Upgraded 8 gang switch panel have automatic dimmable feature. When it in the tunnel or dark palces, will be dim to reduce the impact on the driver's vision, when it on the road or bright places, will be brighter to make driver control it easier. Compared with ordinary switch panel, our will improve your off-road and night driving experience!

EASY INSTALLATION & SAFETY DESIGN: Keep various wires organized and dry in such a compact control box. Come with wear resistant and plug&play wiring harness, fuse, relay and temperature protection switch. Two kinds of mounting ways for you to choose, you can install it with our mounting bracket or double-sided adhesive tape in any where, no need to cut a big hole on your vehicle!

multi-function designed: this switch panel is integrated with 2 rocker switches and 4.8a dual usb charger with voltmeter. suitable for most 12v-24v dc cars, utvs/atvs, trucks, trailers, rvs, caravans, buses, marine boats, yachts etc.

efficient charge: dual usb charger enable you charge two devices simultaneously at full speed with 2.4a in each usb port. with a total power of 4.8a, it works for all usb-powered devices. makes the charger 40% faster than conventional chargers.

led voltage display: the voltmeter is builted in the center of the usb charger, clearly shows the current readings of working volts, easily notice the voltage condition of the vehicles.

Lighted Rocker Switch: SPST rocker switch 12v, 3 pin 2 position design.

Rating: 20A 12V DC; 10A 24V DC, heavy duty 12 volt toggle switch design.

Blue LED: This led rocker switch is blue led illuminated design, light up when switch on, LED off when turn off the switch.

[Waterproof Switches & Aluminum Panel]: The item is made of waterproof switches and aluminum panel, which is sturdier and more durable than plastic panel. The item has a unique technology in the waterproof structure. The ultra-thin silicone film prevents water from entering the inside of the switch panel, ensuring the inner cavity is dry, avoiding short circuits, and making the boat rocker switches safer during use.

[Buckles Design]： Each switch has a buckle on both sides, they are premium pc materials, can keep the toggle switches on panel tighter, which prevent the rocker switches from falling off or breaking down in use.

[Easy to install and use]: 5 pin on-off rocker switch with Single Pole Single Throw design, simple installation, freely turn on or off the light. The 3 gang switches can be applied to DC12V or DC24V operating voltage.

【Heavy Duty】This 12V DC 20A 3 pin blue LED switch panel control system can better control multiple circuits. Suitable for all types of circuit control.

【High Quality Material】This truck rocker switch panel is made of high-quality strengthened aluminum, uses copper-plated silver contacts, has good electrical conductivity, which is corrosion resistant, strong flame retardant and durable.

【Simple Installation】The 6 gang switch panel can be installed horizontally or vertically. The panel is equipped with mounting screws and apron,this apron can be used as a template, for easily marking the drill locations and cutting.

DC 12V Ignition Switch Panel 5 in 1 Car Engine Start Push Button LED Toggle For Racing Car Truck RV

Racing Car Ignition Switch kit: 1 ON-OFF Red Toggle Switch+1 x Red Engine Start Button + 3 x ACC Toggle Switches panel kit for Racing use. Come with the relay to control the buttons of this item .

Ignition Starter Switches: with red illuminated engine start button, and the pre-drilled mounting holes design is convenient for installation, professional installation is highly recommended.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New 16mm Latching Switch; Black Shell Ring LED; LED voltage: 12V only, Hole size required: 0.63''/16mm

Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC； 12 volt switch

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 7/8''/22mm

22mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

【Feature】- Blue LED lighted round toggle switch, SPST 3 pin 2 way rocker switch design. The illuminated design led rocker switch help you easily locate and identify the status of the switch.

【Rating & Mounting】- The rating of this lighted round rocker switch is 12V 20A heavy duty design. The mounting hole size for this 12v rocker switch is 20MM (about 0.79").

【Easy Installation】- This round led rocker switch is snap-in mounting design, which is easy to install and remove, makes the replacement of the switch easier for you.