Best Axial Axle in 2026

Complete parts set lets you build either a complete front axle or a complete rear axle

High pinion design provides added ground clearance and better drivershaft angles

Small pumpkin for increased clearance and a scale look, while optimized 3.75 gear ratio reduces torque twist

Made of high quality metal

Equipped with screws

It help to install the servo on the front axle

Compatible with Axial Scx24 AXI90081 AXI00001 AXI00002 1/24 rc crawler truck car.

Made of high quality metal material, durable to use.

These shaft set add 4mm to the track width on each side of the rc car to add clearance and stability, also it can increase tire selection options.

Steel internal gears and driveshaft,gear ratio:38T/13T

Novel appearance and exquisite workmanship

High pinion gears for added ground clearance and better driveshaft angles

The INJORA Portal Axle creates extreme amounts of ground clearance under the center of your axle.

Diamond-shaped pumpkin for increased clearance a more realistic, scale look.

Optimized gear ratio – 3.75 compared. This reduces torque twist which is typically seen with other small pumpkin axle designs.

100%brand new and high quality

Application: 1/10 Rc Rock Crawler Car AXIAL SCX10

Material:High quality alloy metal

🚙【Compatible with】: The Front and Rear portal axle housing assembled are the upgraded parts for Horizon Axial 1/24 SCX24.The model is (AXI90081T1, AXI90081T2);(AXI00001T1, AXI00001T2);(AXI00002T1, AXI00002T2);(AXI00005T1, AXI00005T2).Replacement for#AXI31609, #AXI31610.

🔥【Highlights】: The Portal axles provide an abundance amount of ground clearance,which can give you guys have a consistent feel ascending and descending all types of terrain.

💯【Key Points】1: After you upgrade the motor, the motor with too much power will easily damage the Portal axles,but we have the portal CVD drive shaft axle to fix this problem. 2: The wheel jam is also easy to damage the Portal axles.If any question ,just contact our RCAWD,we will give you a satisfied solution.

Fit for SCX10 1/10 RC Crawler

Machined from aluminum and anodized for good looks

Metal internal gears and driveshafts

【Outstanding Appearance】CNC aluminum machined, Black anodized, improves the overall performance.

【Unique Designs】Adds 4mm to the track width on each side of the vehicle. This helps to increase stability over rough terrain, as well as increase steering clearance to allow a wider selection of tire options.

【New Upgrades】The INJORA +4mm extended axle equipped with 13T(Front) & 16T(Rear) worm gear set. Compared with original SCX24 16T, 13T overdrive gears increase speed about 23%.

Scale-looking AR45 standard solid axles come complete with ball bearings and metal gears for durability

AR45 universal joint axles provide up to 45 degrees of steering plus smoother action for a higher performing efficient drivetrain

All links are metal and all pivot points are on stainless steel balls for long-lasting performance

This metal axle housing set is fit for 1/10 rc crawler Axial Capra Unlimited Trail Buggy UTB.

Color: Black housing & Black cover.

Currie F9 portal axle housing (for front axle).

🚕 Aluminum Alloy Complet Axle for Axial SCX10 III SCX10.3 AXI03007 RC Car, Built for extreme off-road capability that takes you to new places and new adventures.

🚕 Material：Machined from CNC Aluminum and Anodized for Good Looks Directly Replace Original Plastic Axles.

🚕 Enhances SCX10 III RC Crawler Car Performance in Handling and Durability, Providing Unmatched Driving Versatility.

This is a complete set of aluminium upgrade units for 1/10 rc crawler Axial SCS10 II 90046

Improve the trafficability of your car.

Weight: 240g

【STRONG PERFORMANCE】Rc car front rear axle has anodized surface, with good appearance, easy to install and remove, professional manufacture, excellent characteristics, high reliability, directly fitment.

【GOOD ACCESSORY】Front rear axle tire drive shaft, high precision, can provide you with smooth and excellent using effect, internal steel gear and car axle, can control the car's motion freely.

【SIMPLE TO USE】Rc front rear axle is super easy to install and remove.Compact size, light weight, conveneint to use, and it has glossy surface, perfect fit, make your remote control car cool and more attractive.

▶【Compatible With】The 1/24 front and rear axles kit is suitable for Axial SCX24 Deadbolt/C10/JLU/Gladiator/Bronco

▶【Overdrive 23%】OGRC SCX24 front axle built-in 13T OD gears gives faster speed, helps the steering and crawling for more complex terrian and reduce rollover.

▶【Universal Joint】The axle equipped with universal joint shaft, the steering angle more than 45°. It improves the overall performance of the axle, excellent climbing and off-road performance improves vehicle stability.

Front and Rear Portal Axle for 1/10 RC Crawler Car Axial SCX10 I SCX10 II RGT 86100 Redcat GEN8

CNC Machined, Billet Aluminum Housing, Smooth Anodized Coating

Compact yet durable design, Hardened Steel Construction Driveshafts, Full Ball Bearings

Aluminum Alloy Front and Rear Axles, Using CNC technology Suit for: 1:10 RC Crawler Axial SCX10 D90

Material：Machined from aluminum and anodized for good looks Directly replace Original plastic axles.

Advantage: Fine workmanship and perfect style, Easy to install and remove, fit to the Axial SCX10 D90 rc car axle perfectly.

Fits for Axial Capra 1.9 UTB

Aluminum alloy material, Hardened Steel Gears and Construction Driveshafts, Full Ball Bearings, Stainless Steel Servo Steering Links

Up to 45 degrees of steering

🚙【Fitment】: for SCX24 upgrades part for Horizon Axial 1-24.✨#AXI90081 ( T1, T2 ); ✨#AXI00001 ( T1, T2 ); ✨#AXI00002 ( T1, T2 ); ✨#AXI00005 ( T1, T2 ); ✨#AXI00006 ( T1, T2, T3 ).

🔥【Highlights】:The Portal axles provide an abundance amount of ground clearance,which can give you guys have a consistent feel ascending and descending all types of terrain.

🚙【Aluminum Alloy + Brass + Steel Material】: Brass can increase the crawler's overall weight and stability. Hard-anodized colour, CNC machined PTFE-coated hardened alloy 6061-T6. The aluminum improves the overall performance.

🔥【Aluminum Front Rear Axle】RC Axles CNC Metal RC Axles Complete Set for 1:10 RC Crawler Axial SCX10 II RGT 86100 Redcat GEN8 Element Enduro CC01.

🔥【CNC Front Rear Axle】This 1/10 crawler Front Rear Axle is made of 6061 aluminum shell, CNC machining, tailor-made for DIY enthusiasts! Integrated C-Hub design, integrated Panhard mount, upper link mount built into the differential cover. Upper Link Mounts Built into Differential Cover.

🔥【High Quality Matetial】: Made of Aluminum alloy CNC processing RC front and rear axle kit with anodized and hardened surface, steel spiral gear, excellent quality. Novel appearance and exquisite workmanship, Servo structure on the axle (steering force is more stable).

1/10 Portal Axles Set Suit For : Axial SCX10 II 90046 90047 RC Crawler Car

Aluminum alloy shell, steel internal gear and drive shaft are durable. extreme off-road capability that takes you rc car to new places and new adventures.

Lightweight upgrade enhances rc car's performance in handling and durability, providing unmatched driving versatility

Fits for Axial SCX10 I, SCX10 II, RGT 86100, etc.

Made of high quality metal material

Easy to install and durable in use

✅【Fits For】:RC Axle Metal Front&Rear Portal Axle with Protector Upgrades Part for 1:10 RC Crawler Car Axial SCX10 & SCX10 II 90046 90047.

📌【High-quality Material】:Hardened steel gears and drive shaft, use all SCX10-II linkage, suit for 1:10 RC Crawler Car Axial SCX10 & SCX10 II 90046 90047.

📌【Long-lasting Performance】: The upgrades part is durable enough,Optimized gear ratio – 3.75 compared. This reduces torque twist which is typically seen with other small pumpkin axle designs.

Integrated axle housing design for durable.Portal box built into the knuckle with bolt on high steer arm for double shear mounting.

Offset C-hubs is machined into the housing for strength and durability, Adjustable steering stop integrated into knuckle.

Complete fast eddy bearings kit. Double shear shock mounts. Integrated panhard mount. Increased upper link clearance for more suspension up travel ability.

【Compatible With】OGUNKE RC Complete Axles kit is suitable for Axial SCX24 AXI00001 C10, AXI00002 JEEP JLU, AXI00005 Gladiator, AXI00006 Bronco, AXI90081 Deadbolt RC Crawler Car.

【Overdrive 23%】OGRC scx24 front portal axle built-in 13T OD gears gives faster speed, helps the steering and crawling for more complex terrian and reduce rollover.

【Brass Material】Increase body weight and improves the overall performance of the vehicle.

1.This portal axles are formed from high-quality nylon and fiber materials by high-precision mold injection molding,surface frosting texture treatment,metal gears and bearings are used internally,which is beautiful and durable;

2.Excellent design: The front axle adopts large-scale c-knuckle design and the rear axle is an integrated structure. At the same time, the caster angle of the front axle is 18.5 degrees and the kingpin inclination angle is 7.5 degrees.This is a perfect angle, which can effectively improve the stability of the vehicle when climbing;

3.The performance is improved: Compared with the stock vehicle, the ground clearance is increased by 12mm, effectively improving the trafficability and stability;

Material:Made of high quality aluminum CNC technology alloy corrosion resistance and good looks.

Features:Internal steel gear and car axis can control the movement of the car freely. High pinion gears for added ground clearance & better driveshaft angles.

Easy to install:easy to install and configure the drive shaft to make your remote control car more attractive.

★[High-quality upgrade accessories]: The front and rear axles of the remote control car are easy to install, durable, and fit perfectly, making your remote control car cooler more attractive and an excellent accessory.

★[Compatible with]: The front and rear axles of this remote control car are suitable for SCX10 II 90046 90047 1/10 RC car model, which can be substituted.

★[Superior Material]: The front and rear axles are made of aluminum alloy housing, steel internal gears and drive shafts are durable and can extend their service life. With increased height and width, it is more passable than ordinary axles and higher from the ground.

1/10 Portal Axles Set Suit For : Axial Capra 1.9 UTB RC Crawler Car

Material：Machined from CNC Aluminum and Anodized for Good Looks Directly Replace Original Plastic Axles.

Lightweight upgrade enhances rc car's performance in handling and durability, providing unmatched driving versatility

Material: Aluminum 7075

Processing: Complete CNC Billet Machined

Oversize bearings to increase the durability