Best Red Back Up Light Assemblies in 2026

Package incldues 2 Pieces White 7" Round LED Backup lights with reflex lens. Screws and thick mounting gaskets are included for complete mounting.

This is a 7 Inch Round LED Reverse lights which has 36 LEDs and works great for transit vehicles, bus, utility, and dome light applications. This 7" White LED Bus Tail Light is sonically sealed and waterproof with a surface mount light with mounting gasket. With the built-in reflex, the reflector in the center of the light can be visible from a long way off. They mostly works with the 7" round LED stop tail turn lights;

This 7 inch round back-up Light is 12V DC and is hard wired with separate ground wire: white is ground, black wire is dimmer for taillight/running light, and red wire is brighter for back up/revese lights mode. NOTE: These 7" School Bus lights can be used but they do not have flashing patterns. But with a proper relay it can be a flasher;

Package includes 30 pieces 3.8" Inch Led Trailer Lights 6LED (10Pcs Amber + 10Pcs Red + 10Pcs White); free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on; We also have customers asking whether they can be use as turn signal lights, brake lights or backup lights, they can, but they may be not that bright;

Package includes 2 Pieces led triple horizontal mount taillights FULL LEDs featuring a black base with 8 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light;

These Triple Vertical Taillights include 3 red lenses: 2Pcs replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White Leds(Built-in reflex reflector removes the need for a separate reflector); This Led triple tail light assemblies can be mounted oriented horizontally, vertically, surface/flat mount, whatever suits your application;

This LED Triple Tail Light is hardwired with 8 wires: White is the ground, Blue is backup/reverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights; NOTE: If upgrading form halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal;

Package includes 20 pieces 3.8" Inch Led Trailer Marker Lights 6LED Amber Lens; free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small thin clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam Amber Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on; We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright;

[Awesome Lights] The 8 inch slim strip light built-in 9 LED, stable output super bright white light; adopt clear polycarbonate lens for better light emmiting; IP67 Waterproof, Circuit board completely sealed to prevent damage from moisture and corrosion.

[Wide Application] This white led strip is excellent for lighting or decorating interior and exterior of boats, RVs, camper, trailer, truck, motorhome and other vehicles. It can be used virtually anywhere you need light and can connect to 12v dc current.

[Multipurpose LED Lights] Can be used at camper shell light, interior light, under hood light, car trunk light, ceiling light, clearance lights, runnling lights, side marker lights, indicator lights, step lights, stair light etc, anywhere you can imagine.

Package includes 10 pieces 3.8 Inch Blue Led Trailer Marker Lights 6LED; free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the blue marker lights or to the surface to which the blue light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam blue led lights function as marker lights, clearance lights, runnling lights, side marker lights, license plate lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light,cockpit light, step lights, deck lights, trailer lights, led courtesy lights, stern light, stair lights, truck lamps and so on; Truly many customers use them as boat marine lights, very bright;

Partsam (2 x White) Sealed Waterproof 12 LEDs light Stop Turn Tail Brake Lamps Reverse Backup Lights for Trucks, Trailer, RVs, and Boats.

Acrylic lens is sonic welded to the housing, waterproof lens and housing in a single unit. Note: the Trim is not removable;

All-weather molded plastic housing and durable lens protect against corrosion.

Package includes 10 pieces 3.8 Inch Amber Led Trailer Marker Lights 6LED; free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the amber marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam Amber Led Lights function as marker lights, clearance lights, runnling lights, side marker lights, front parking lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps and so on; We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright;

Package includes 1 set LED Tail Lights Assembly Kit, compatible with 1976-1983 CJ5 tail lights, 1976-1986 CJ7 tail lights, 1981-1985 CJ8 tail lights, 1987-1995 Wrangler YJ tail lights and 1997-2006 Wrangler TJ tail lights. Driver Side and Passenger Side are included. Come and replace your dim factory tail lights with our brilliant LED tail lights assemblies and get eye-catching;

This rear combination tail lights kit feature 12 large brake, parking and directional LED's, 6 license plate light LED's, 21 brilliant white Back-Up LED's and 3 side reflector light LED's;

Partsam LED lights are a direct replacement for your stock tail lights. These rear LED lights are completely compatible with your electrical system, and the wiring tips are as below: White is ground, blue wire is for backup reverse light, black wire is for tail/license plate light/side marker light and red wire is for stop turn brake light;

Partsam includes 2 Pieces 15 Inch White LED Trailer reverse light Bar. This trailer light functions as a side marker light and backup light for your trailer. Other mounting hardware not included;

Each 15 inch white Led strip bar is powered by 11 high power Super FLUX LED for a bright performance. This White Led Strip Bar have nice clear lens is HARDWIRED with a three wire pigtail: white is ground wire, Black is the low brightness as marker lights or clearance lights, Red is the high brightness as back up lights or reverse lights;

Dimension of the white led light bar: The overall length is about 15.5 inches, wideth is about 1.25 inch, and the thickness is about 0.5 inch. It's a nice low-profile white light bar. There is a little knob where the wires all come out, so the overall depth is about 1 inch, and you may need to cut out a hole to allow that to go in. The spot knob is about 0.57 inch in diameter. Really a nice slim profile unit;

Package includes 4 Pieces 4 inch Round Led Stop Turn Tail Lights Red and 2 Pieces 4 inch Round Led fog back-up reverse Lights White, Round rubber Grommets and 3-prong wire pigtails are included for complete installation;

These Waterproof round led trailer lights 12 LED serves as the following functions: stop light, turn signal light,tail light(red lights) and Backup Lights or Reverse Lights(White lights); Recessed mount with rubber grommets and Pigtails and accepts standard 3-prong plug; These round tail lights are Approx. 5 inch Grommet Ring and 4" inner diameter and 1 3/16" Thickness, Please drill a hole about 4.5" to install; IP65 waterproof and please do not use it under water;

Easy to install: White is the ground, red is the high brightness and Black for low brightness; These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each round trailer light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb; 12 Volt DC Input;

2-1/2" Diameter round Waterproof white LED light functions as both a clearance light and a side marker light when properly mounted. Flush mount with included black grommet and 2-wire pigtail. Clear polycarbonate lens, white when lit.

Function as Round Side Marker Lights, Clearance Lights, ID Lights, Interior Courtesy Light, Front Outline Maker Lamps, Round Led Reverse Backup Lights etc.

2-1/2" flush mount LED light for use with anywhere you can cut a 2-3/4" hole in a flat sheetmetal panel. push-in mounting with the included rubber grommet.

Partsam ( 2 x White ) 4" Round Led Truck Trailer Lamp--reverse backup running Light, with 24pcs high power LED inside.

Application: Trucks,trailers (Boat, Box, Camper, Transport), 4WD, Caravans, Motor Homes, Boats / Marine, Earthmoving & Mining Equipment, Forklifts, Buses and Coaches, Camping, Fishing.

Dimensions: outer diameter 5.5inch, inner diameter 4" (check the picture 5), dill a hole about 3.85" to install it; Function as back up light, reverse light and running light.

Package includes 6 Pieces 5x3 Rectangle Led Stop Turn Tail Lights and Backup Reverse Truck Trailer Hitch Lights(4 Pieces red lights and 2 Pieces white lights). Rate for 12V,test to 13.8V;

Each led tail light has 12 leds and provide super night vision and enhance visibility during night. Functions of 5x3 Rectangle led trailer lights: stop light, turn signal light, tail lights (Red 5x3 lights) and back-up lights or reverse lights(White 5x3 led lights). NOTE: People call it 3x5 rectangle led lights on Market, but the actual sizes are as following: 5.14" x 3.27" x 1.00" (light only), 6.25" x 4.26" x 1" (overall size), drill a hole about 5-5/8" to install it;

These taillights are HARDWIRED with 3 wires: White Wire is the Ground; Red Wire is the high brightness; Black Wire is the low brightness; NOTE: These 3x5 lights are NOT "plug and play" lights. It does not have the standard 3 prong plug that these style trailer lights typically do, You need to hardwire them. It’s a very easy thing to do;

Package includes 2Pcs Square 39 LED Double Face Led Pedestal Fender Turn Signal Lights with Dual Mounting Studs: 39 Total LED's and 3 Amber Side Marker LED's; Heavy Duty Chrome Plated Housing, Reflector Design; Versatile multi-directional mounting design (up/down/sideway) to turn the light 90 or 180 degrees; universal stud mount design with interchangeable single or double studs;

This Dual-face trailer light is AMBER on both sides! Although in most states in the US it is required for pedestal lights such as this to have an amber face to the front and a red face to the rear, there are some exceptions!;

This amber square dual-face trailer light serves functions: Parking and rear turn signal light; Also you can use it as marker lights; Built-in reflex reflector removes the need for separate reflector and Perfect lights to mount on your truck or trailer side fenders;

Package includes 2Pcs Universal Square 12V Combination 38 LED Signal Tail Light; Each one is equiped with 38 Super bright LEDs: 16 Red LEDs for stop/turn/tail functions, 18 White LEDs for backup function, 4 White LEDs for license illuminator; Both are set up for license plate lights as well as reverse lights;

These rear combination tail lights have studs on back sticking out will bolt to any flat surface; This is not a replacement for Wrangler YJ CJ JK tail lights, not factory mount. If you want to install it on wrangler trucks, you may need some modification: There is no wiring harness so you have to splice the wires yourself. Also, The bolt holes are larger than stock so you will need to drill out your body to make them fit. The entire assembly is a touch larger than stock as well;

DOT Compliant for street legal lighting. 12 volts; Low ampere draw; 3-stud mount design is easy to install on any vehicle exterior and the distance between the mounting blots is 2" ~ 2.2"; Resistant polycarbonate housing and acrylic lens provide weatherproof protection against water, shock & vibration;

Package includes for 2 Pieces amber front side fender marker light cover with sockets and 2 Pieces Red rear side fender marker light cover with sockets, upgrading your pickup truck broken dually fender lights. NOTE: T10 LED bulbs are not included;

Compatibile with: Replacement for 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 F350 F450 F550 Super Duty dually bed fender lights;

These dually bed fender marker lamp covers are perfectly match for the stock fender marker lenses. Interchange part number: 8C3Z15442A 8C3Z15442B F81Z15442CA 15442 15A436 8C3Z-15442-A 8C3Z-15442-B F81Z-15442-CA;

Partsam includes 2 Pieces 15 Inch White LED Trailer reverse light Bar and 2 Pieces 15 Inch Red Led trailer stop turn tail light bar, 4 Pieces in total. Other mounting hardware not included;

Each 15 inch Led trailer tail light bar is powered by 11 high power LED for a bright performance. These Led Strip Bars are HARDWIRED with a three wire pigtail: white is ground wire, Black is the low brightness and Red is the high brightness. Functions of trailer led light bar: red led light bar functions as stop turn brake light in high mode and tail or running light in low mode; white light bar function as backup light bar or reverse light bar in high mode and side marker light in low mode;

Dimension of the trailer light strip: The overall length is about 15.5 inches, wideth is about 1.25 inch, and the thickness is about 0.5 inch. There is a little knob where the wires all come out, so the overall depth is about 1 inch, and you may need to cut out a hole to allow that to go in. The spot knob is about 0.57 inch in diameter. Really a nice slim low profile unit;

Package includes 2 Pieces 4 inch Round Led Stop Turn Tail Lights Red and 2 Pieces 4 inch Round Led fog back-up reverse Lights White, with Round Stainless Steel Bezel Rings, Mounts on trailer with built-in flange and Stainless Steel Screws are included for complete mounting;

These Waterproof round led trailer lights 24 LED serves as the following functions: stop light, turn signal light,tail light(red lights) and Backup Lights or Reverse Lights(White lights); These 4 inch led lights for trucks are Approx. 5.5 inch in diameter and 4" inner diameter and 1.55" Thickness, Please drill a hole about 4.4" to install. Screw hole to hole distance: 4.3" approx.; IP65 waterproof and please do not use it under water;

These 4 round led lights HARDWIRED with 3 wires: Black is the ground, red is the high brightness and White for low brightness; These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each round trailer light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb; 12 Volt DC Input;

[High-quality Led Tail Light] Each is equipped with 26pcs LED lights inside, including 12 red square LEDs (Stop, Turn, and Tail), 4 white square LEDs (Back-up, Reverse), 4 red 2835 LEDs (Side Marker), 6 white 2835 LEDs (Only one side has License Plate Light).

[Easy Installation] White wire is the GROUND; Black wire is red light, low brightness, and function as tail/side marker/license plate lights; Red wire is red light, high brightness, and function as stop/brake light; Blue wire is white light and function as a reverse light.

[Functions] Stop, brake, turn signal, tail, reverse/backup, side marker (not just a side marker reflector!), and license plate light for most 12V vehicles like Trailers, Trucks, SUVs, RVs, Caravan, Vans, etc.