Best Midline Valve Ball Valves in 2026

INSTALLS IN SECONDS: 3/4 Inch ball water valve requires no special tools, no soldering, no crimping or glue; push-to-connect design provides an efficient application that saves time and money; just push to create a watertight seal

VERSATILE: Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC, PE-RT, and HDPE Pipe and connects them in any combination

PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit

ICE MAKER OUTLET BOX: Eastman ice maker outlet boxes provide a safe water supply installation to ice makers, and are designed for recessed residential applications

DURABLE: This Eastman PEX Pre-Assembled Ice Maker Outlet Box features a brass 1/4 turn valve, and is built for long-lasting reliability; UPC approved and lead free compliant

WHAT IS INCLUDED: The ice maker line box comes complete with (1) pre-installed 1/4-turn ball valve, (1) support bracket, and (1) faceplate cover

Body material: Brass; Seats: Teflon;

Max. temperature: 200°F;

Non-shock WOG: 600psi;

High quality: Made of lead-free brass, with excellent reliability and strength, suitable for residential applications.

Compatible: Hourleey hot and cold PEX ball valves are compatible with all 1/2" PEX pipes.

Application scenario: Designed for circulating heating and drinking water distribution. Approved to be used underground and behind walls without access panels.

1/4-inch compression by 1/4-inch compression

Heavy duty, commercial grade

Brass ball valve, male flare

One-piece Copper Brass Valve Body

Used as shut-off valve or water saving adjustable valve

On/ Off Switch with Quarter-turn easy operation

FITMENTS: 1/2'' standard connections, NPT- female and male, compatible with the most common showerhead connectors in the North America.

FUNCTIONS: This stainless steel ball valve use as showerhead shut off valve, RV shower shut off valve or water saving adjustable valve, which also widely used at home, bathroom, kitchen, RV, Motorhome, etc.

RELIABLE & LEAKPROOF: This shower shut off made by one piece construction and has a blow-out proof stem to reduce leakage and valve damage. The maximum operating temperature of this shower on off valve is 325 degrees F.

PROFESSIONAL GRADE: The "Gold Standard" of plumbing fittings, don't settle for anything less! Specified by the Plumbing Trade Professionals.

PUSHFIT INLET: 1/2" Nominal (5/8" OD) for 1/2" pipe (Copper, PEX, CPVC, or PE-RT). Simply push to connect to pipe.

COMPRESSION OUTLET: 3/8" OD Compression for faucet or toilet supply line (in most cases simply remove and discard nut and ferrule when connecting to supply line)

For reliable flow control in your natural; manufactured; mixed liquefied petroleum gases and LP gasair applications

UL Listed and CSA Approved 600 psi WOG; 175 psi WSP Temperature 4°F thru 149°F Ends conform to ANSI.B1.20.1

ALUMINUM ALLOY QUARTER TURN HANDLE: allows easy shutoff in your gas lines

Single lever controls cold and hot water flow from the water supply to the flexible hoses feeding a washing machine

Eliminate pressure on supply hoses and prevent potentially damaging results of a burst water hose

Ball-type design also allows lever to be opened to any position to control water flow

Contractor 5 pack. Solid lead-free brass construction. Includes all compression rings.

Heavy duty squared-body design to fit wrench tightly when tightening.

1/4-turn ball valve style for durability and easy on/off operation.

WATER SHUT OFF VALVE: Brass crimp valves are perfect for helping to control water flow and enabling water supply shut off for servicing and making repairs; includes a vinyl coated steel lever handle

COMPATIBILITY: SharkBite plumbing fittings are compatible with PEX pipes; certified for potable and radiant heating applications

FULL PORT DESIGN: PEX ball valves feature a full port design to allow for maximum flow and minimum pressure drops

EZ-FLUID Plumbing Chrome Brass Water Shut Off Valve, Straight Angle Stop Valve Use for Kitchen, Bathroom Faucet Water Valves and Toilet Water Valve

Lead-Free Quarter Turn Ball Valve Straight Angle Stops 3/8-Inch Female O.D. Compression Captured Nut x Outlet: 3/8-Inch O.D. Male Comp w/ Brass nuts and sleeve

Fits on top of faulty valves to provide a shut off quick fix

Can be used as a tank check valve for small compressors or as a component in pneumatic circuits

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Fluorocarbon O-rings for higher temperature and chemical resistance

How To Shut Off Completely: Use the brass material for ball,which will last for a long time and won’t rust/leak. Unlike other products that use iron, this product’s inside sealer material is Teflon, which is much better than normal plastic

Clean Thread: It’s very important for installing, we have one specific quality inspection procedure for this part in the factory

180° Handle: You don’t even need to consider which side you should move it to. Both sides can be closed. You will find it extremely convenient, especially in urgent situations

HIGH QUALITY: Constructed of lead free (DZR) brass for superior reliability and strength

EASY TO USE: Fittings Work with Crimp Ring or Clamp Connection Methods

Barb x barb x barb connection for PEX plumbing systems, Rated to 200°F and 200 PSI

✅MEASUREMENT- The gas ball valve is equipped with a 1/2 inch flare x 1/2 inch female iron pipe (FIP) threaded connection.

✅QUALITY- The straight-flare gas ball valve is constructed of high-impact, durable brass to provide a strong and long-lasting performance. The working pressure is up to 175 PSI. A working temperature range of 32-degrees Fahrenheit to 125-degrees Fahrenheit is recommended for product safety.

✅FUNCTIONALITY- The straight-flare valve is designed for use with liquefied petroleum, LP gas, and air mixtures.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Red Plastic-covered lever handle for on/off manual control.

The outside thread with sealant for better sealing.

Package include: 3/4 Inch Isolation Kit involves hot and cold valves 500WOG with 1/4 red and blue handles, equipped with full port ball valve for better flow rate.

Easy to use: Tankless water heater repair valve 500WOG, red and blue valve handle, easy to identify hot and cold valves

Material: Components are certified lead-free brass, Meets all federal and state standards regarding lead content in drinking water system components. You will also find CSA certification on the water pipe and gas pipe to prove its authenticity

GAS SHUTOFF VALVE: The gas ball valve with quarter turn handle is in-line for connecting two pipes going in the same direction

FUNCTIONALITY: The gas shut off valve is designed for use with liquefied petroleum, LP gas, and air mixtures up to 175 PSI

EASY TO USE: The gas ball valve connector features an aluminum lever handle with a 1/4 turn operation for easy on and off control

Directly Supplied by One of the Biggest Plumbing systems Manufacturers

2 Pieces Straight Stop Valve 1/2" FIP Iron Pipe x 3/8" Compression Chrome,

1/4-Turn 1/2-Inch Female Threaded and 3/8-Inch OD Compression Fitting. Made of Lead Free Brass and a Chrome-Plated Finish,

Gas Ball Valve with 1 Inch FIP x 1 Inch FIP for Gas Connectors

Large Wrench Flats Allow for Quick and Easy Installation; 100% Factory Leak Tested

Quarter-Turn Lever Handle; Brass Construction

★ Material: Brass. Which make it much more healthy for human. Certified to contain less than 0.25% lead.

★ Size: 1/2" FIP (1/2"-14 NPT Pipe Female Threaded) x 3/8" inch OD compression fitting.

★ FINISH: Chrome-plated finish resists corrosion. Working temperatures of -40 to 250 F.

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

SAFE AND RELIABLE- Comprised of strong, trustworth brass, this valve is reliably safe; Lifespan of 80,000-100,000 cycles means a valve that will last

NPT THREADING- 1" Brass threading, manufactured and measured according to National Pipe Thread standards; This electrical ball valve is standard port, meaning the bore in the ball is a little less than 1”; This minimizes pressure loss through the valve; Perfect for home automation projects

9V-24V AC/DC- Works effectively over entire voltage range; Will open or close valve in 3-5 seconds; Limit switch minimizes power after valve is fully open; Ideal for projects where an automatic return is necessary

PUSH-TO-CONNECT: Easiest and fastest way to join copper, PEX, CPVC, PE-RT, HDPE pipe in any combination. No need for installation tools, glue, or soldering! Simply push to connect pipe!

HEAVY DUTY INDUSTRIAL GRADE: Dezincification resistant brass (DZR) construction, 100% Leak Proof Up to 200°F and 200 PSI

REMOVABLE & REUSABLE: Disconnect clip tool allows you to easiliy remove valve after installation

Max. Pressure: 600 PSI WOG

Temperatures range from -4 to 194 F

180 Degree operation handle; Double o-ring

Are you tired of those cheap plastic shower diverter valves that constantly break? Designed and tested in the USA, this shower arm diverter by HammerHead Showers is built from the highest quality brass, making this the last one that you’ll every need!

Do you have trouble deciding which shower head to buy? With this 3-way diverter, you can get the best of both worlds by installing two showerheads in one. Simply rotate the knob to divert water spray from the fixed shower head to the hand held shower head, or run both at the same time!

1/2" connections are compatible with all shower arms and shower heads, so you can confidently build your custom dual showerhead.

FITMENTS: 1/2'' standard connections, 1/2'' G Thread female inlet to 1/2'' G Thread male & 1/2'' G Thread male outlet, this shower diverter can compatible with the most common bathroom shower connectors in the North America.

FUNCTIONS: This stainless steel ball valve use as shower diverter valve to easy adjust the water flow between the shower head or hand shower for a flexible shower experience.

RELIABLE & LEAKPROOF: This shower splitter made by one piece construction and has a blow-out proof stem to reduce leakage and valve damage. The maximum operating temperature of this shower on off valve is 325 degrees F.