Best Allen Bike Cargo Racks in 2025

Patented design fits sedans, hatchbacks, minivans, and SUV's consult manufacturer web site for specific vehicle fit information.Comes fully assembled set up and installs in seconds 12 inch long carry arms easily accommodate a wide range of bicycle styles and 115 inch wide carry arms for greater bike compatibilityShips in certified frustration free packaging 70 pounds max capacityFolds fully flat for easy storage.Allen's warranty does not cover items purchased through third-party sellersImportant, please consult manufacturer web page for specific vehicle fit

Side straps for increased lateral stability. Single configuration design eliminates setup hassles and headaches during installation

Individual tie downs secure and protect bicycles

Please Type in your Key Code Only and you will receive 1 (One) code cut key. It's that simple! The original code (stamped) can be found on either the front side of the lock, stamped by the keyhole or stamped on the original key. Original key codes are between 2802 and 3024.

Available codes : 2802, 2806, 2808, 2818, 2820, 2824, 2826, 2854, 2856, 2858, 2860, 2862, 2865, 2872, 2874, 2878, 2900, 2982, 3021, 3024

Please use the . Customize Now . function and type in your . Key Code Only . (Four Numbers within the available codes shown above) Then just place your order. Thank You!

Easily fits all bike racks using 1-1/4" or 2" receiver tubes

4 locking wheels used to roll the rack out to your vehicle; Reccomended to lock the wheels when inserting or removing hitch rack from the rack valet

Angled hitch receivers for easy entry and removal of the bike rack

A place to stash your rack and other hitch racks, too

Ability to store a single rack up to a 4-bike system

Low-profile design stores vertically, flush with the wall

2 Bike capacity up to 60 lbs. each

Holds wheelbases up to 48” and tires as large as 4.8”

Adjustable front tire cradle system

2 Bike capacity up to 40 lbs. each

No-tool install with hand tight hitch cam system

Semi integrated bike lock

Seatpost-mounted: for light, top loads

Quick-release bag mounting system

Durable, lightweight aluminum 700g

Used by both professional and amateur riders alike

Made using high quality materials and components

Tested to ensure quality and durability

Frame-mounted for heavier top and side loads

Quick-release bag mounting system

Adjustable to fit most 26–29 inch bicycle frames can carry upto 25 kg (55 lb)

WATERPROOF &TEARPROOF MATERIAL - Made of 100% waterproof material,600D PVC tarpaulin, Grid material with High frequency voltage technology, durable and heavy duty style bag.

EASY TO US - The Leader Accessories roof bag come with 6x security straps, and 1x storage box, it can be quickly and easily installed in minutes; Made of soft shell material, it can be folded into the storage bag to save space while not in use.

LARGE STORAGE SPACE - 17 cubic feet 58” (L) X 21” (W) X 24” (H) cargo bag allows you to hold suitcases, travel luggage case, tents, sleeping bags and more.

Lightweight aluminium/plastic construction

Easy to installs in minutes

Second lower rail allows for lower pannier mounting and better bike handling

MADE FOR YOUR BIKE: This platform-style, hitch-mounted bike rack fits your 2-inch hitch receiver and supports the skinniest road bike to the fattest e-bike— and everything in between. Transport 1 or 2 bikes weighing a total of 120 lbs.

SAFE AND SECURE, EVERY TRIP: With tire and frame straps, locking adjustable padded frame hooks, and a locking anti-wobble hitch system, your bike is safe and secure from bumps, bangs, and theft on this powder-coated, heavy-duty hitch bike rack.

NO-SWEAT SETUP: Spend more time on your bike and less time in the garage. Quickly assemble and mount this bike rack on your car, truck, or SUV and hit the road (check out our assembly videos). Easy-to-follow assembly instructions and all assembly and installation hardware are included.

Stromberg Carlson CC-125 Cargo Caddy Bike Rack Adapter.Stromberg Carlson CC-125 Cargo Caddy Bike Rack AdapterAccommodates tire widths up to 2.25 inchesThe Kit contains components and hardware for two complete bike racks to be used on Cargo Caddy (item CC-100)Included components : (4)Tire Holders, (8)Carriage Bolts, (8)Lock Nuts, (2)Tie Down StrapsTire holders may be placed individually for a custom fit for each bikePowder coated to resist corrosionAccommodates tire widths up to 2.25″Cradles stand up 11.5″ from the carrier surfaceThis only fits with the Cargo Caddy CC-10Note: CC-100 Cargo Carrier sold separately.

Accommodates tire widths up to 2.25 inches

The Kit contains components and hardware for two complete bike racks to be used on Cargo Caddy (item CC-100)

Get your bikes on the road without the hassle with the RidgeBack; Carry 2, 4 or 5 traditional geometry bikes to your next ride (slanted top tube bikes require the TubeTop adapter, sold separately)

Easily access gear in your trunk with the tilt-away design (even with bikes loaded); The UpperHand lever lets you tilt the rack down and fold it flat for low-profile storage

Protect your bikes from dents and scratches with the anti-sway cradle that eliminates bike-to-bike contact; Zero-hassle ZipStrips secure your bikes to the rack

Convenient light/reflector attachment point to keep you visible

Improved clearance due to raised strut mounting points

Rack remains secure under heavy loads with rubberized grips that prevent sliding and protect bicycle frame

Ebike Compatible - holds two bikes each weighing 65 lbs (130 lbs max load). V70 Hitch Rack is for road bikes, mountain bikes, MTB, fat tire bikes up to 5 Inches wide. Compatible with SUVs and cars with 2” tow hitch receiver. NOT FOR: Class B vehicles (RVs, Motorhomes), front of vehicle, vehicle being towed, 5th wheel or trailer, or 1 1/4" hitch.

Convenient Tilt Down & Fold Up - Quick release pedal tilts down the bike hitch rack for easy trunk access, and also folds up out of the way when not in use. <br/> Flexible Wheel Cradles - Snugly fits narrow/wide bike tires up to 5” wide. Ratchet straps hold wheels securely in place without scratching rims or damaging tires

Triple Lock Security - Three locking mechanisms to keep your bikes extra secure. Includes Safety Strap - Feel confident with your precious cargo. NOTE: Step-through / womens bikes must use a frame adaptor (not included).

The Saris bike beam top tube adapter creates a top tube for non traditional bike frames from the stem to the seat post

Ideal for mounting your bike to a car rack or home storage unit

Easy to use, the secure snapping feature insures that your bike beam is properly installed

Clearance for tailgates or rear doors

Proprietary FLATLOCK cam system

Locking hitch pin

VERSATILE: The ROAMER 84" Cross Bars will fit most bike and water sports accessories. They can also be used to mount solar panels on a camper. The square steel crossbars accept most clamp-on carriers and accessories. Use them as a car top carrier to carry kayaks, or on an RV camper to perfectly haul your bikes.

EASY TO ASSEMBLE: Directions provided help guide through an easy installation. The roof rack crossbars come with provided bolt-down hardware and rubber pad mounts and are flawless for a generic installation on a flat surface. The cross bars can also be cut to fit your specific application.

STURDY: The crossbars are made from steel with a black powder coat finish that resists rust, corrosion and fading making them solid, strong, and stable. Build a universal roof rack that holds up well to hauling kayaks and bikes at the same time!

Country Of Origin: Taiwan, Province Of China

Package Height Of The Item Is 15.0"

Package Length Of The Item Is 20.0"

Adventure ready: Load your bike in seconds whether it's a 20-inch wheel or a 29er; StrongArm design secures bike at wheels, protecting paint and carbon frames

Smart design: Tilts down with bikes loaded so you can access the back of your vehicle; Accommodates disc brakes, thru-axles and full suspension bikes

Unrivaled spacing: Carries 2 bikes out of the box, or 4 bikes with optional HoldUp +2. 1-1/4" or 2" Hitch Receiver; Side-to-side adjustability to adjust space between bikes

Strong Aluminum rack: oversized, 6061 tubular aluminum rod for maximum strength and stability

Electric bike ready: add to your electric bicycle to help with additional cargo and pannier bags

Hassle free installation: one size fits most frames with pre-installed rack hardware for quick, hassle-free installation

●●Design with high quality aluminum alloy and quick release. Fits V-brake and Disc brake bike; For fat bike, road bike, mountain bike,etc. (Kids' bike and Trek Verve can not be used)

★★★Easy to install: Refer to the installation video of this product on Amazon, it will make your installation easier and less error-prone;

●●180lbs weight capacity; 4 strong legs make it carry more weight;

BONES EX: Lightweight at 11 lbs; strongest frame on the market, arc–based design separates bikes on different levels.A Bike Beam may be required for frames without a horizontal top tube.Rust-free injection molded plastic. Rubber feet articulate to protect paint.MADE IN USA: Hand built in Madison, Wisconsin with 100% recyclable materials

COMPATIBILITY: Fits 90% of the top vehicles sold, including those with spoilers; has the largest vehicle compatibility of any trunk rack on the market

CAPACITY: Carries 2 bikes (35lb/bike) premium bike hold downs that are easy to use and quick to load

56-inch long cross rail roof rack mounts to most cars, SUVs, or crossovers with raised longitudinal rails, gap between rail and car roof must be 1/2 inch (1.3cm) and above, distance between two rails must be bigger than 42 inch (107cm) and smaller than 49.6 inch (126cm) , diameter of rail must be within 1.4-2.1 inch (36-55mm). Vehicle fit found in Product Description below.

Installing rubber sealing trips into roof racks as per paper UM or DP video can reduce wind noise, the rubber sealing strips is included in product packaging

Heavy-duty aluminum crossbars offer a strong, lightweight construction that’s resistant to corrosion; 165 pound capacity

Ibera PakRak Clip-On Quick-Release, clip on Ibera's Mini Commuter Bag (IB-BA6) and release it within 3 seconds!

Fits most 26" and 700c frames

Durable, lightweight, 1.4 lbs (648 g)

A thru-axle adapter for 9mm quick release fork mount bike racks. Accommodates bikes with 12x100mm, 15x100mm, and “Boost” 15x110mm thru-axles

Carries 1 bike, up to 35 lbs.

CNC machined 6061-t6 aluminum, powder coated black

Easy Installation - Fits on round seatpost diameter of 0.85 - 1.3 inch (21 mm - 33mm). Adjustable quick release clamp

Adjustable supports measure 13 - 16.5 inches; Anodized Aluminum Rack Measures 14”(L) x 5.6” (W) and Weighs 2.75 lbs (1247 g)

Tools - Uses 5mm or 6mm Hex/Allen wrench (not included) or pliers. Instructions included

Used by both professional and amateur riders alike

Made using high quality materials and components

Tested to ensure quality and durability

CLAMP - Fits 25.4 - 31.8 mm (shims Incl.)

BAG COMPATIBILITY - MTX TrunkBags, Topeak

MAX WEIGHT CAPACITY - 9 kg / 20 lb