Best Aluminum Bike Cargo Racks in 2025

Seatpost-mounted: for light, top loads

Quick-release bag mounting system

Durable, lightweight aluminum 700g

Used by both professional and amateur riders alike

Made using high quality materials and components

Tested to ensure quality and durability

Frame-mounted for heavier top and side loads

Quick-release bag mounting system

Adjustable to fit most 26–29 inch bicycle frames can carry upto 25 kg (55 lb)

Strong Aluminum rack: oversized, 6061 tubular aluminum rod for maximum strength and stability

Electric bike ready: add to your electric bicycle to help with additional cargo and pannier bags

Hassle free installation: one size fits most frames with pre-installed rack hardware for quick, hassle-free installation

●●Design with high quality aluminum alloy and quick release. Fits V-brake and Disc brake bike; For fat bike, road bike, mountain bike,etc. (Kids' bike and Trek Verve can not be used)

★★★Easy to install: Refer to the installation video of this product on Amazon, it will make your installation easier and less error-prone;

●●180lbs weight capacity; 4 strong legs make it carry more weight;

56-inch long cross rail roof rack mounts to most cars, SUVs, or crossovers with raised longitudinal rails, gap between rail and car roof must be 1/2 inch (1.3cm) and above, distance between two rails must be bigger than 42 inch (107cm) and smaller than 49.6 inch (126cm) , diameter of rail must be within 1.4-2.1 inch (36-55mm). Vehicle fit found in Product Description below.

Installing rubber sealing trips into roof racks as per paper UM or DP video can reduce wind noise, the rubber sealing strips is included in product packaging

Heavy-duty aluminum crossbars offer a strong, lightweight construction that’s resistant to corrosion; 165 pound capacity

A thru-axle adapter for 9mm quick release fork mount bike racks. Accommodates bikes with 12x100mm, 15x100mm, and “Boost” 15x110mm thru-axles

Carries 1 bike, up to 35 lbs.

CNC machined 6061-t6 aluminum, powder coated black

Easy Installation - Fits on round seatpost diameter of 0.85 - 1.3 inch (21 mm - 33mm). Adjustable quick release clamp

Adjustable supports measure 13 - 16.5 inches; Anodized Aluminum Rack Measures 14”(L) x 5.6” (W) and Weighs 2.75 lbs (1247 g)

Tools - Uses 5mm or 6mm Hex/Allen wrench (not included) or pliers. Instructions included

Used by both professional and amateur riders alike

Made using high quality materials and components

Tested to ensure quality and durability

CLAMP - Fits 25.4 - 31.8 mm (shims Incl.)

BAG COMPATIBILITY - MTX TrunkBags, Topeak

MAX WEIGHT CAPACITY - 9 kg / 20 lb

FITS FAT AND MOST TIRE SIZES - Our patent-pending adjustable width design will work with most fat bike frame, hub and tire widths, without having to twist or bend anything

FRONT OR REAR COMPATIBLE - Can't decide if you want to install on the front of the rear of your bike? Don't worry about it, this product does both easily

DISC BRAKE COMPATIBLE - Sometimes these new fangled disc brakes get in the way of accessory installation. This product was designed to make sure that isn't an issue

Super lightweight aluminum hitch bike rack for 3 bikes

Half the weight of traditional steel hitch bike racks (20 lbs) allows easy installation and removal

Designed to fit 1.25" or 2" hitch receivers

PERFECT FIT - Outfit your Jeep Wrangler Sport, Unlimited or Gladiator (JL, JK, JT) with this perfect fit roof rack. Stylish, quiet, aerodynamic & removable Aero Bar cross bars. Perfect for mounting Jeep Wrangler Accessories or Jeep Gladiator Accessories.

FITMENT - Made to Fit the Four Door Hardtop Jeep Wrangler JK 2007-2018, Four Door Hardtop Jeep Wrangler JL 2018-2021, and the Gladiator JT 2020-2022. For the Two Door Wrangler JL & JK, Use Rhino-Rack Model SG60 (ASIN B01966C4CA).

BUILT TOUGH - Made with strong and lightweight structural grade anodized aluminum means lasting durability and long life. Never settle for anything less. The bar internal H-shape provides exceptional bar strength. Finished in stylish black powder coating.

Universal: HOMEE bike rear rack suitable for most bicycles, such as road bike, mountain bike, fat bike, etc. (Kids' bike, soft bike, folding bike, small tire bike, uncommon rack and Trek Verve cannot be used). This bike back rack come with bike accessories and installation instruction, The Rack body is adjustable in size

Easy To Mount: Shelf for back of bike length 21.65 inches, Width 5.7 inches; Panel Length 13.98 inches; Width 5.7 inches (Seat Tube Diameter: 0.85-1.3"/2.2-3.3 cm) adjustable for kinds of bikes. This bike back rack perfect for use with panniers, backpacks, baskets

Durable: 110Lb Capacity, Durable Alloy Steel Rack for V Brake and Disc Brakes.

Quick release bars make for quick and easy removal when not in use, no tools required

The Shortboard Rack version of our classic frame mount LongboardRack, both bars are mounted directly to the seatpost, making the racks very stable with boards up to about 7 feet in length

All aluminum and stainless steel construction

Compatibility 26" (up to 5.0")

Weight 982 g / 2.16 lbs (including hardware)

Capacity 50 kg / 110 lbs

【Anodized Aluminum Frame】The bike cargo rack is made of high strength anodized aluminum alloy,joined with stainless steel screws and anti-loosening nuts ensure the bike rack will not go loose on rough road or get rusty after light rains!Smooth rust-proof coating not only ensures beautiful appearance,but also makes you ride freely in rainy humid conditions!The whole frame is welded by TIG method which is usually used for many aircraft and airspace parts,designed for the hardest long-distance ride

【Adjustable Structure】The bottom rods and shelf's arms are both adjustable to fit most 26" to 29" bike!The adjustable structure allows you adjust the length and height of the bicycle luggage rack as you need to fit most of bicycles with non-disc brake(tires width under 4.5"),like mountain bike,road bike!As long as your bike is equipped with mounting holes to bolt the rack in,our bicycle carrier rack will fit your bike without worrying about the width of tires or the height of the bike!

【Large Load-Bearing】Our touring carrier racks is lightweight but strong and sturdy enough for bearing up to 55 lbs,provide you with extra security and strength for long-distance ride,great for cycling enthusiasts!The bike rear rack and the bicycle form a firm and stable triangular shape,which effectively enhances the stability and makes it carry more weight than most bicycle carrier on the market!5-point support structure is more stable and pressure-resistant which not easy to deform and swing

【LARGE LOAD】: The rear bike rack frame forms the most stable triangular force structure, which can withstand the weight of 110LBS even on rough roads. The bike rack for back of bike has anti-slip stripes and bungee cords add extra stability to the pack. This rear rack for bicycle can carry the weight of all basic riding gear.

【RUGGED, LIGHTWEIGHT DESIGN】: The rear rack for bicycle is made of high-quality aluminum alloy material, and weighs only 1.2kg, which is light but strong. The side baffle of the bike cargo racks is fixed with two shock-proof screws, which can effectively prevent your bicycle bag from being rubbed by the wheels. The bicycle cargo rack has 2 sets of spare screws are provided, The lack of parts is avoided.

【EASY TO ADJUST】: The bike carrier rack adopts a quick-release design, and the bicycle back rack can be firmly fixed on the bicycle through three rack clam without the use of additional tools. (3 on the main body + 1 on each support rod) can move the position of the bike back rack panel, and the anti-vibration screws can avoid loosening caused by long-term shaking.

Adjustable length: 13.8inch~19.7inch ; Width: 4.7inch;

Quick release mounted at seatpost, fits seatpost diameter under 33.3mm only

Made of strong aluminum alloy,max load capacity:22lbs.

110 lb Weight CAPACITY: Support 50kg / 110lb Max load. Suggest 25 kg if only the main bar. Used by both professional and amateur riders alike. Has Both sides baffle your friends can wear.

UNIVERSAL rear seat rack fits almost all bikes, such as road bikes, mountain bikes, fat bikes, etc. (kids' bike and Trek Verve can not use). Suitable for 15" to 20” MTB Mountain bike, can also be used for 26, 27.5, 29 bicycle routes/cycling trails. For V Brake and Disc Brakes.

Durable bicycle rear bag rack is made of strong and lightweight Aluminum alloy. Seatpost mount bike rack, quick release and max load. Ideal to use with panniers, backpacks, baskets, suitcases, trunk bag, etc.

Aluminum side frames for use with MTX TrunkBags equipped with panniers

Works with MTX TrunkBag DXP and MTX TrunkBag EXP

WEIGHT - 300 g / 10.56 oz

🚲Application: It fits most seat post diameters less than 32 mm, but not for folding bikes and bicycles with shock absorption.

🚲Load capacity: 110Lb Capacity, Durable Alloy Steel Rack. It is made of high quality Aluminum Alloy,durable and solid.It is suitable for most bicycles, such as road bike, mountain bike, fat bike, etc.

🚲Dimension: Shelf Length 55 cm, Width 14.2 cm(21.6x5.6in);Panel Length 35.5 cm,Width 14.5 cm(13.9x5.9in). It is adjustable for many kinds of bikes. Easy to Mount.

【High Quality 】 --- The bicycle carrier rack is made of strong and durable aluminum alloy material, which can bear more weight and will not be easily damaged. And it is equipped with stainless steel screws, which can help you ride freely in rainy or humid environments and keep your bicycle dryer and cleaner.

【Quick Release】 --- Easy to replace and install on the sitting post of the bike rack. The retractable bike cargo racks is fixed with quick-release buckles, which is convenient to disassemble and assemble whithout any tools, very suitable for temporary use of bikes. 4 original high strength screws and the following two reliable screws can securely hold the bracket in place.

【Adjustable Shelf】 --- There is an inner hexagon at the bottom for tight and loose loading, you can adjust the length of the bicycle rear seat post rack by yourself and extends backwards or forwards according to your needs (rack length:14.2inch~19.7inch ). So the bracket can be adjusted according to different seat post sizes.

High Quality & Lightweight with Large Capacity Bicycle Cargo Rack, This Rear Rack is Perfect for a Long Cycling Trip and Excursions to Carrying Enough Daily Necessities.

Addition Poles Fixed to Rear Frame and 2 Side Bars for Preventing Scratched by The Wheel or Spokes.

Fit for Seatpost Tube Diameter Less Than 1.3" / 33mm and Rear Frame Tube Diameter Less Than 1" / 25mm.

【Sturdy】：This bike carrier rack is made of strong aluminum alloy structure, it supports up to 9kg (20lbs) cargo.

【Large-capacity】：The bicycle rear rack is very suitable for long-distance riding and short-distance travel, and can accommodate many daily necessities. Fits most bicycle sizes.

【Adjustable】：Attached to the bicycle seatpost, the adjustable mounting rod extends backward/forward according to your needs.It fit different bikes, retracted for easy storage.

🚲【5-Minute Quick Installation and Disassembly - Upgraded Type】➤There are 3 quick release clips on the bike back rack, one on the seat and the other two on the support bar. The length and height can be adjusted according to the need. The fast adjustment design makes the installation and adjustment easier and saves more time. Suitable for most bikes with seat rod diameter less than 32mm/1.3in, such as road bikes, mountain bikes, etc.

🚲【Fit Almost Bikes】➤Bike cargo rack length: 51.5cm/20.27 ", width: 14.5cm/5.7 ", panel length: 35.5cm/13.97 ", adjustable front and rear, upper support rod length: 25cm/9.84 ", lower end can be height adjustable length :1-15cm/0.39 -5.9 ", the total length of the support bar can be up to: 40cm/15.8 ", suitable for a wide variety of bikes or fat tyre widths ≤ 4.5 ", perfect for using bags, backpacks, etc.

🚲【High Strength Aluminum & Feature Upgrades】➤The rear bike rack is made of premium aluminum and non-slip screws. Weighing 2.6 pounds (1.2 kg), the high quality materials help you ride outdoors or easily load 110 to 165 pounds of cargo. The enlarged and upgraded flanks (larger than their counterparts on the market) effectively prevent your luggage from rubbing against the wheels while protecting your children in the bike rack for back of bike.

Customizable Support - Our bike back seat rack is universally extendable, allowing easy adjustment to match your cycling needs. Perfect as a bike commuter rack, it embraces your daily necessities

Robust Bike Carrier Rack - Made from durable and sturdy aluminum alloy, our alloy rear rack ensures a load capacity of up to 20lbs to support heavy luggage, saddle equipment, and touring gear securely

All-Weather Durability - Our bicycle back rack resists rust to endure all weather conditions, making the bike rear rack a reliable companion in rainy, humid, and dry environments

A durable, versatile bike cargo rack for long distance touring. Mounts to the back of your bicycle to help you easily transport for strap-attached bags, panniers, luggage, backpacks, cargo, baskets, and etc

Material made of 6061 Hollow Aluminum, durable, lightweight, and good quality. It's easier to install and adjust thanks to flexible attachment arms that has more than an inch of wheel clearance

The three stays rack design makes it stronger and more stable than racks with only two stays, and it has a maximum rated capacity of 110 pounds. It's fully welded for superior durability. This design makes it physically stronger and more stable under heavy loads

Durable:made of high quality aluminum alloy and iron,sturdy&abrasion resistant,weight capacity up to 115 lbs.

Adjustable:adjustale design of the shelf and bottom rods,fits most 24"-26" bicycles like mountain bike type and road bike type

Quick Release:coming with tools and installation direction,easy to detachable and assemble,quick release mount at seat post

Works with most 26-inch mountain bikes; not recommended to use on downhill or freeride bikes

Works with non-drive single crank arm

Folds small enough for jersey pocket