Best Annhua Blocks in 2026

PARAMETER-----10 stainless steel #8 terminal screws,3*1/4" studs.

WHAT YOU GET-----Cover attaches with nylon nuts to the two outside studs to protect against accidental short circuits. Come with 1/4” and #8 suitable insulated ring terminals.No need to find the small rings anymore.

RANGE FOR USE---- Max voltage: 48VDC. Max continuous amperage: 150ADC. Max intermittent: 20 A per connection (less than 1 minute).

Product Name: [1] 6P Dual Row Terminal Block Stripe; [2] 12P Fork Type Terminal Stripe

[Terminal Block Stripe] 600V 15A, Material : Copper, Plastic

[Fork Type Terminal Stripe] 400V 10A, Material : Copper, PVC

Terminal Block Type - Dual row 6 position screw terminal block with cover and terminal jumper block.

35A Larger Amp Rating - The rating of this terminal strip is 600V 35A, which makes it can handle a wider range of using scenarios compared with others.

Protect Cover - Each marine terminal block will come with a cover, which will shelter most exposed contact areas to reduce the risks of causing short circuit or accidental touching.

30Amp 300V 2x12 position screw terminal block distribution module. Support for multiple module extension connections.

A / B position maximum current 30Amp(each position). A 1~12 total maximum current 30Amp(total positions). B 1~12 total maximum current 30Amp(total positions). A 1~12 / B 1~12 position maximum current 10Amp(each position). Maximum voltage 300V.

A / B terminal blocks, Pitch 7.62mm/0.3", Wire range 26AWG ~ 10AWG / 4.0mm square, Rated voltage 300V, rated current 30Amp. Strip length 8mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.

✯ Category: Barrier Terminal Strip; Type: TB-4503L, 3 Positions Dual Rows.

✯ Material: Copper, PVC; Color: Black, Brass Tone.

✯ Rated voltage/current: 600V/45A.

【Safe and Reliable】Idong Power distribution block Selected flame-resistant material, safer than normal plastic,internal Copperplate conductor material, better conductive properties,And nickel-plated which has a long life, no corrosion, anti-aging

【Easy to use】First insert the wire into the ring terminal, then open the protective cover, and finally pass the screw through the terminal, and tighten the screw to fix the terminal. The wires will not come loose.

【Universal product】 providing maximum voltage: 300V AC, 48V DC and 130A AC, 150A DC current,Up to 10 circuits can be connected to a row. good protection for your boat, car, RV

✯ Category: Terminal Block End Stopper; Type: E/UK; Fit Rail Width: 35mm / 1.37 inch.

✯ Material: Nylon PA66 Housing, Fire retardant, Flame retardant.

✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail.

Material: the base is made of hard plastic, the circuit board is made of copper, stainless steel terminal, PC protective sleeve, durable.

Model: Red base, M6 terminal stud x4, M4 screw terminal x 6.

Features: Maximum voltage: 300V AC, 48V DC. Maximum continuous amperage: 130A AC, 150A DC.

FANTASTIC DESIGN: 2 position, 3 position will be sold together. two row, 600V 36A, terminal block.

GREAT SIZE: 21 x 21 x 21 mm/0.83 x 0.83 x 0.83 inch, 33 x 21 x 21 mm/1.22 x 0.83 x 0.83 inch.

MODEL: H2519-2 and H2519-3. Package quantity: 5pcs.

UL 600V

UL 1/0-12AWG

UL 150A

Fully Customizable Kit

UL Listed 600V

UL Listed 12-22 AWG

【1 x (0/4) AWG IN, 2x (4/8)AWG OUT】Our power distribution block adopts input to accept 1/0 or 4 wire, and output to accept 4 or 8 wire, making your system wiring easier, which is very suitable for car audio installation and amplifier wiring.

【Deep Groove Hidden Protection】The power distribution block with a deep groove design can well protect the wiring, effectively prevent the wiring from being exposed to components or other objects that may cause system failure, and make the wiring more durable.

【Easy to Install】The screw-in cable clamp and the impact-resistant plastic cover design make the power distribution block for car audio splitter very easy to install. You only need to connect the cable and cover the plastic cover.

Fully Customizable Kit

UL Listed 600V

UL Listed 12-22 AWG

Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x #8-32 Screws with captive star lock washer, Stud terminal: 1 x #10-32

Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools

Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers

4 gang terminal block neatly organizes wire connections

Corrosion resistant construction

Size: 4 inch x 1-5/16 inch x 11/16 inch

【12 POSITION & 3A】12 position, 3A, 380V, 2 row terminal barrier strip wire connector

【SUITABLE WIRE】For cable: 1.5-2.5mm²

【SAFE & RELIABLE】Each pair of terminals is insulated from the next, preventing circuits from disorder.The set screws secure wires reliable contact and help prevent accidental contact with the terminals

【Parameter】 - Model:E/UK ; Mounting rail width: 35mm/1.38" ; Length: 42.1mm/1.66" ; Width: 9.5mm/0.37" ; Height: 35.3mm/1.39"

【Material】 - This terminal block is made of plastic material, and the screw fixed type is suitable for din rail

【Features】 - The sturdy structure can be firmly locked on the din rail. It is easy to insert the wire, and the screw terminal can firmly fix the wire

【High quality PCB carrier】This Terminal Block Connector is a High quality PCB carrier.

【 mount on DIN rail 】This Terminal Block Connector Can be mounted on DIN rail with width 15/32/35mm.

【application】This Terminal Block Connector is Suitable for PLC, Mitsubishi Servo and DIN rail mount.

20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC power jack. Support for multiple module extension connections.

Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp. Maximum voltage 48V DC or AC.

Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug.

Pitch: 2.54mm 0.1"

Pin Number: 5

Rated Value: 300V 10A

8 Pin PCB Screw Terminal Block Connector: Rated Value : AC 300V, 16A, Pitch : 2.54mm/0.1"

High Quality: PCB Screw Terminal Block Connector Made of ABS Plastic, Electric Parts; Screw Terminals Wire Sizes: 18AWG to 26AWG

Quick Connection: Screw Terminal On Header Provide Secure Connection and Quick Disconnection,Very Easy to Install

Product Name : PCB Terminal Block

Material : Plastic,Metal;Color : Green

Rated Value : AC 150V 8A;Pin Distance: 2.54mm/0.1"

Unassembled, variety mount methods, you can make flexible use.

PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm.

Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass.

GLOSO Double Row Stainless Terminal Block 6P

Center Spacing: 0.687" or 11/16" (17.45 mm pitch)

Rated Voltage/Current: 600V/75A

Safety and reliability: JANDECCN din rail terminal blocks are made from insulated material, flame-retardant, corrosion resistance, aging resistance, high pressure resistance. Strong structure firmly locked to DIN guide, long service life.

Product feature: JANDECCN wire splicers instead of the ordinary rail connector, reduce the wiring time by 50~70% with our new design. The wire connectors support a variety of installation methods (guide rail and screw mount). Make the connection easier faster and lower maintenance cost.

Widely applicable: JANDECCN lever wire connectors can be used for home appliance, lighting, electrical control, power supply, switches, machinery and other wire connection parts. Every junction independent shrapnel, different wire managed separately, improving safety performance.

Product Name : DIN Rail Terminal Block；Model : USLKG2.5

Length (mm): 42.8, width (mm): 6.2, height (mm): 41.6

Fit Rail Size : 35mm. Poles: 1 Positions.

Pitch: 2.54mm 0.1"

Pin Number: 12

Rated Value: 300V 10A

Ideal for Automotive, Solar and Marine Use - These busbar blocks have a max continuous rating of 180 amps @ 12VDC total. Each connection is rated for 15 amps continuously with a max intermittent rating of 20 amps. Max voltage of 48VDC. Ideal for automotive, car audio, solar, and marine use

Includes Both Red and Black Connectors - With these 2 packs of 12 terminal power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals Wire up to a dozen accessories with these 2 packs of power distribution bus bars

Anti-Corrosive & Even Consistent Flow - Our bus bars are anti-corrosive and constructed to handle high currents. The base material is glass filled nylon and a 1/4” stainless steel hex nut and lock washer. Includes a cover and a terminal boot to insulate and protect connections for damage and corrosion

Essential Parameter: 4 x 5/16" studs, size 6.6" L x 3.1" W x 1.7" H, maximum operating voltage is 48V DC, rated current of the entire block is 250A, rated current of each stud is 62.5A

Quality and Sturdy Material: the terminal blocks are made of zinc alloy and brass with smooth surface, featuring good electrical conductivity, corrosion and wear resistance, also including a removable cover to protect the connection

Red and Black Pair Power Distribution Block: the terminal block has enough connection points for positive and negative terminals with 5/16" holes, 4 post bus block will make your electrical system run faster, and make your wires look orderly

🛒Material: PC material shell, high toughness and not easy to break, transparent plastic protective cover, dust-proof and scratch-proof protection wire connector

🛒Features: Compact and not easy to fall off, the gasket at the wiring will not loosen, and it is more firm

🛒Easy installation: Comes with a Phillips screwdriver for easy installation and meets your needs