Best Leigesaudio in 2026

Distribution Block-High Performance 2 Way Copper Car Audio Power/Ground Distribution Block

1-0/2/4 Gauge In,2-4/8 Gauge AWG Out

Solid Brass,Gold-Plated for Corrosion Resistance

Distribution Block-High Performance 2 Way Copper Car Audio Power/Ground Distribution Block

1-0/2/4 Gauge In,2-4/8 Gauge AWG Out

Solid Brass,Gold-Plated for Corrosion Resistance

Distribution Block-High Performance 2 Way Copper Car Audio Power/Ground Distribution Block

1-0/2/4 Gauge In,2-4/8 Gauge AWG Out

Solid Brass,Gold-Plated for Corrosion Resistance

High Performance Copper 2 way Car Audio Power/Ground Distribution Block.

1-0/2/4 Gauge AWG In,2-0/2/4 Gauge AWG Out.

Solid brass,the Interior Is Made Of Copper.

High Performance Copper 2 way Car Audio Power/Ground Distribution Block.

1-0/2/4 Gauge AWG In,2-0/2/4 Gauge AWG Out.

Solid brass,the Interior Is Made Of Copper.

High Performance Copper 3 way Car Audio Power/Ground Distribution Block.

1-0/2/4 Gauge AWG In,3-4/8 Gauge AWG Out.

Solid brass,the Interior Is Made Of Copper.

➤ 20FT 4 AWG CCA Power Cable/ 3FT 4 AWG CCA Ground Cable

➤ 18FT 16 AWG CCA Speaker Cable/ 17FT Twisted OFC RCA Cable

➤ 17FT 18AWG TURN-ON Wire / 1 ANL Fuse Holder with 80 AMP Fuse (Connecting Terminals and Accessories Included.)

POWER - MAX Power 1Ω：1x2200w @ 1ohm,MAX Power 2Ω：1x1400w @ 2ohm;RMS Power：1x900w @ 1ohm, RMS Power：1x600w @ 2ohm. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.

CLASS D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it's needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.

1 Ohm STABLE - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.

SUPPORTS CAR AUDIO SYSTEM: A high-demand audio setup can often place extra demand on your car's electrical system. When you need power, especially for booming bass and soaring highs, this 2.5 farad capacitor will have more electrical conductors than other competitors.

BLUE DIGITAL DISPLAY: it's got all you need to make sure your system sounds awesome and stays safe - a blue digital voltage readout to show you how much power is available.

TRUE CAPACITANCE: it keeps your light bright and reduce dimming lights.

Solid Brass-High Performance Copper Car Audio Power Fuse Distribution Block

0/4 Gauge In To 4/8 Gauge out

Compact 2 Way Fuse Block With Mini ANL Fuses

150A Common BusBar with 10 screws (part number 2301)

Max voltage: 300V AC/ 48V DC, Continuous Rating: 130A AC/ 150A DC

Terminal Screws: 10 x #8-32, Terminal Studs: 2 x 1/4"-20

Can accept bare wire or spades. Can accept 12 to 18 AWG speaker wires.

Color coded Black/red rings for maintaining proper polarity

Secure, positive contact with binding posts

Power/Ground Distribution Block

Input: Accepts 0GA(1GA)*1,Outputs: Accepts 4GA*4 Wire

Made of High Performance Copper

Distribution Block-High Performance 2 Way Copper Car Audio Power/Ground Distribution Block

1-0/2/4 Gauge In,2-4/8 Gauge AWG Out

Solid Brass,Gold-Plated for Corrosion Resistance

Ideal for Automotive, Solar and Marine Use - Our 250 AMP 4-post power distribution block busbar is ideal for automotive, car audio, solar, and marine use. Whether you need to consolidate, distribute, or protect your electrical system, our bus bars are excellent for managing wires and distributing power.

Includes Both Red and Black Connectors - With these 2 packs of 4 post power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals with 5/16" holes. The 4-way bus wiring block will make setting up your electrical systems quick, neat, and easy.

Anti-Corrosive & Even Consistent Flow - Our bus bars 12v are anti-corrosive and constructed to handle high currents. The nickel-plated brass contact plate ensures even and consistent flow and stability. Wire up to 4 accessories. Each bus bar terminal block includes a cover to protect connections from damage and corrosion.

MADE IN THE USA - This Busbar Measures approximately 1 3/8” Wide x 1 7/8” Tall x 6 5/8” Long

Nickel Plated Brass Contact Plate For Optimal Current Transfer And Weather Resistance. Glass-Filled Nylon Base For Superior Insulation And Strength

Stainless Steel Hardware For Extreme Conditions Including Use In Marine Environments - Detachable Cover Included To Protect Connections. WE RECOMMEND A SMALL AMOUNT OF NICKEL ANTI SEIZE BE APPLIED TO THE THREADS TO PREVENT GALLING

ON-Q PHONE/ DATA KEYSTONE JACK: Universal design supports either T568A or T568B termination standard. Ideal for streaming TV, Movies, gaming and faster downloads.

EASY TO INSTALL: Easy "1-for-1" installation lets you replace your existing inserts with On-Q phone keystone jack in just minutes. Color-coded wiring label is easy to read.

REAR MOUNT, SNAP-IN KEYSTONE DESIGN fits in your existing electrical box and does not require new wires for typical installation. Innovative assembly and snap-in system make it fast and simple to install.

Connections: 6 Standard 45A power pole connectors. Can compatible 15A, 30A or 45A power pole connectors.

Maximum Voltag: 60VDC.

Maximum Current: 45A.

Two 5/16" stainless steel studs with divider for Positive and Negative connections. Comes with 2 x 4AWG & 2 x 8AWG 5/16” ring terminals, and stainless steel screws.

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits.

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC.

Single connections with 5/16" stainless steel studs. Comes with 8AWG 5/16” ring terminals and stainless steel screws

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC.

High Performance 2 way Copper Car Audio Power/Ground Distribution Block

1-0/2/4 Gauge In,2-4/8/10 Gauge out

High Strength, Nonperishable Industrial-grade Plastic Cover

Distribution Block-High Performance 2 Way Copper Car Audio Power/Ground Distribution Block

1-0/2/4 Gauge In,2-4/8 Gauge AWG Out

Solid Brass,Gold-Plated for Corrosion Resistance

High Performance 4 Way Car Audio Power/Ground Distribution Block

1 X 0/2/4 Gauge In, 4 X 4/8 Gauge Out. Forged and Machined Brass Construction for Maximum Power Transfer

Marine-grade Satin Chrome Finish for Superior Corrosion Resistance

1 x 0GA IN, 3 x 4GA OUT: Input accepts 1/0 or 4 gauge wire, Outputs accepts 4 or 8 gauge wire, Come with 2 Pieces car amplifier power distribution, make wiring your system easier with high quality distribution blocks.

3-Way Connection: ideal for multi car amp systems, nickle plated internal materials eliminates the possibility of corrosion, rust, oxidation, or premature wear on speaker wire connection points.

Deep Wire Recesses: VonSom distribution blocks with deep recesses to protect wiring from being left exposed to the elements or other objects that might cause your system to malfuction.

Operating voltage: 0 to 32VDC, No-load current: 2mA(for power indicator LED). Input port: maximum input current 40A, fuse 40A. Output port: 8 output ports, fuse 30A*2, 20A*2, 10A*2, 5A*1, 3A*1.

With power indicator LED. High-quality fuse holder, you can very easy to replace fuse from the outside, ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40A.

Enclosure: High quality aluminum enclosure,thickness 1.5mm/0.06".

WHOLE-HOUSE VOLUME CONTROL: Trimless Decora style impedance-matching volume control kit for whole house audio systems and dedicated audio zones so you can control speaker volume independently within various areas of your home or office.

DECORA STYLE DESIGN: Installs easily and works with almost any audio system, inlclude white trim plate to match your room décor as well as a 12-point linear control knob to adjust volume from high to inaudible.

INCLUDES ADJUSTABLE JUMPERS: Rated at 300 Watts peak with minimal bass roll-off, includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously depending on what type of load your amp can handle.

POWER: The VMS100 is rated at 100 Watts peak, maintaining the full hi-fi audio frequency with minimal bass roll-off. Adjustable jumpers add up to eight pairs of eight ohm speakers simultaneously.

VOLUME CONTROL: The controls allow you to adjust the volume up or down compatible with almost any dedicated audio zone or whole house sound system. It is ideal for dining rooms, saunas, and porches around the house.

IMPEDANCE PROTECTION: This feature of VMS100 assists in stabilizing the ohm load going back to the amp or receiver with parallel connections to avoid overheating and damaging the amplifier.

High Performance Copper 2 way Car Audio Power/Ground Distribution Block.

1-0/2/4 Gauge AWG In,2-0/2/4 Gauge AWG Out.

Solid brass,the Interior Is Made Of Copper.

Basic Parameters --- 6*#8 stainless steel terminal screws, 4*5/16" studs. The dimensions: 6.7"Lx1.3"Wx2.1H".

Operating Voltage/Amperage range --- Max voltage: 48VDC. Max continuous amperage: 250A for the entire connection. Maximum intermittent: 20A for each connection (less than 1 minute). So whether your working on a boat, a car, or an RV, we've got you covered.

Built for Safe --- Nickle plated brass busbar plates offer low resistance, maximum conductivity, and corrosion protection. The nylon nuts connect to two external studs to prevent accidental short circuits. A removable Nylon cover keeps metal components from making contact with anything. The insulated nylon base is flame-retardant.

HYBRID OFC POWER CABLE: This is a True 8 Gauge Oxygen-Free Copper and Copper-Clad Aluminum Hybrid Power Cable. Our kit features a blend of heavy-duty oxygen-free copper and copper-clad aluminum in a hybrid power cable designed for excellent conductivity, durability, and value.

IN-LINE FUSE HOLDER: The MAXI and ATC fuse holders are molded and pre-installed in-line with weatherproof covers for convenient installation and superior protection. It is designed for excellent conductivity, durability, and value.

DOUBLE STRENGTH GROUND TERMINAL: The Double Strength Ground Terminal is a unique pre-terminated ground terminal design that dramatically simplifies installation and improves performance.