Best R2X Racing in 2026

Ideal for Automotive, Solar and Marine Use - Our 250 AMP 4-post power distribution block busbar is ideal for automotive, car audio, solar, and marine use. Whether you need to consolidate, distribute, or protect your electrical system, our bus bars are excellent for managing wires and distributing power.

Includes Both Red and Black Connectors - With these 2 packs of 4 post power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals with 5/16" holes. The 4-way bus wiring block will make setting up your electrical systems quick, neat, and easy.

Anti-Corrosive & Even Consistent Flow - Our bus bars 12v are anti-corrosive and constructed to handle high currents. The nickel-plated brass contact plate ensures even and consistent flow and stability. Wire up to 4 accessories. Each bus bar terminal block includes a cover to protect connections from damage and corrosion.

Ideal for Automotive, Solar and Marine Use - These busbar blocks have a max continuous rating of 180 amps @ 12VDC total. Each connection is rated for 15 amps continuously with a max intermittent rating of 20 amps. Max voltage of 48VDC. Ideal for automotive, car audio, solar, and marine use

Includes Both Red and Black Connectors - With these 2 packs of 12 terminal power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals Wire up to a dozen accessories with these 2 packs of power distribution bus bars

Anti-Corrosive & Even Consistent Flow - Our bus bars are anti-corrosive and constructed to handle high currents. The base material is glass filled nylon and a 1/4” stainless steel hex nut and lock washer. Includes a cover and a terminal boot to insulate and protect connections for damage and corrosion

UL Listed and Outdoor Rated

Elevated cover with padlock prevents unauthorized use

Receptacles protected by Siemens circuit breakers

Power/Ground Distribution Block

Input: Accepts 0GA(1GA)*1,Outputs: Accepts 4GA*4 Wire

Made of High Performance Copper

MADE IN THE USA - This Busbar Measures approximately 1 3/8” Wide x 1 7/8” Tall x 6 5/8” Long

Nickel Plated Brass Contact Plate For Optimal Current Transfer And Weather Resistance. Glass-Filled Nylon Base For Superior Insulation And Strength

Stainless Steel Hardware For Extreme Conditions Including Use In Marine Environments - Detachable Cover Included To Protect Connections

Distribution Block-High Performance 2 Way Copper Car Audio Power/Ground Distribution Block

1-0/2/4 Gauge In,2-4/8 Gauge AWG Out

Solid Brass,Gold-Plated for Corrosion Resistance

PARAMETER-----10 stainless steel #8 terminal screws,3*1/4" studs.

WHAT YOU GET-----Cover attaches with nylon nuts to the two outside studs to protect against accidental short circuits. Come with 1/4” and #8 suitable insulated ring terminals.No need to find the small rings anymore.

RANGE FOR USE---- Max voltage: 48VDC. Max continuous amperage: 150ADC. Max intermittent: 20 A per connection (less than 1 minute).

Ideal for Automotive, Solar and Marine Use - Our 250 AMP 4-post power distribution block busbar is ideal for automotive, car audio, solar, and marine use. Whether you need to consolidate, distribute, or protect your electrical system, our bus bars are excellent for managing wires and distributing power.

Includes Both Red and Black Connectors - With these 2 packs of 4 post power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals with 5/16" holes. The 4-way bus wiring block will make setting up your electrical systems quick, neat, and easy.

Anti-Corrosive & Even Consistent Flow - Our bus bars 12v are anti-corrosive and constructed to handle high currents. The nickel-plated brass contact plate ensures even and consistent flow and stability. Wire up to 4 accessories. Each bus bar terminal block includes a cover to protect connections from damage and corrosion.

MADE IN THE USA - This Busbar Measures approximately 1 3/8” Wide x 1 7/8” Tall x 6 5/8” Long

Nickel Plated Brass Contact Plate For Optimal Current Transfer And Weather Resistance. Glass-Filled Nylon Base For Superior Insulation And Strength

Stainless Steel Hardware For Extreme Conditions Including Use In Marine Environments - Detachable Cover Included To Protect Connections. WE RECOMMEND A SMALL AMOUNT OF NICKEL ANTI SEIZE BE APPLIED TO THE THREADS TO PREVENT GALLING

【QUICK FIX】 – When the current/voltage exceeds the rated range,the fuse will be automatically blown.It has leds beside each load to indicate if a circuit has shorted or has blown.So you can easily identify it and change it!

【MAKE WIRING CLEAN】– Instead of piling a mess of wires and fuse holders onto your battery posts, WUPP 12 volt fuse block/ground bus kit gives you 6 dedicated fuses and 6 ground locations to keep all of your wires clean, organized, and accessible. Made wiring electronics in your vehicles or boat a breeze!

【UNIVERSAL PROTECTION】– The input rated voltage of the fuse box is 32V,and the input rated current is 100A.Each circuit outputs a maximum current of 30A. All bus bars and fuse pieces are nickel-plated copper, corrosion-resistant and highly conductive.

Distribution Block-High Performance 2 Way Copper Car Audio Power/Ground Distribution Block

1-0/2/4 Gauge In,2-4/8 Gauge AWG Out

Solid Brass,Gold-Plated for Corrosion Resistance

Power/Ground Distribution Block

1-0/2/4 Gauge AWG In,2-4/8/10 Gauge AWG Out

Made of High Performance Copper

MADE IN THE USA - This Busbar Measures approximately 1 3/8” Wide x 1 7/8” Tall x 6 5/8” Long

Nickel Plated Brass Contact Plate For Optimal Current Transfer And Weather Resistance. Glass-Filled Nylon Base For Superior Insulation And Strength

Stainless Steel Hardware For Extreme Conditions Including Use In Marine Environments - Detachable Cover Included To Protect Connections

Power/Ground Distribution Block, Audio Stereo Amp Distribution Connecting Block

1-0/2/4 Gauge AWG In,2-4/8/10 Gauge AWG Out

Made of High Performance Copper

High Performance 4-Way Mini-ANL Fused Distribution Block and Ground Block, Each Power and Ground Block has 4 X 0/2/4 Gauge In, 4 X 4/8 Gauge Out

Branch the Main Power Wire to Connect Multiple Amplifiers or Devices. And Ground Multiple Amplifier or Devices together

Positive and Negative Block Two-in-One Design with 4X60A, 4X80A, 4X100A Fuses

→[Dimensions}: The bus bar is measured (L x W x H): 138 x 69 x 44.5mm (5.433"x2.72"x1.75"). Stud size: M8 (5/16").

→[High Quality]: Bus Material: The battery distribution block is made of brass and nickel plated, which has good electric conduct performance and sturdy rust-resistant. The base is made of nylon - glass fiber reinforced to protect your safety, ensures great mechanical strength and durability.

→[Waterproof & Dustproof]: The power distribution block With four removable side plates, a insulated rear cover, that's designed to withstand rain and dust,resist the air and seawater erosion.

High Performance 3-Way Mini-ANL Fused Distribution Block with 3X60A, 3X80A, 3X100A Fuses

3 X 0/2/4 Gauge In, 3 X 4/8 Gauge Out. Forged and Machined Brass Construction for Maximum Power Transfer

Marine-grade Satin Chrome Finish for Superior Corrosion Resistance

Two 5/16" stainless steel studs with divider for Positive and Negative connections. Comes with 2 x 4AWG & 2 x 8AWG 5/16” ring terminals, and stainless steel screws.

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits.

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC.

Car Power/Ground Distribution Block, Suitable for ANL Fuse

Type: 1 Way In 5 Ways Out design power distributor, High-current multi-amp outputs

Electrical Connection: 0GA/2GA/4GA X 1 Input, 2GA X 1+4GA X 2+8GA X 2 Output

Single connections with 5/16" stainless steel studs. Comes with 8AWG 5/16” ring terminals and stainless steel screws

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC.

1 x 0GA IN/ 2 x 4GA OUT - Make wiring your system easier with high quality distribution blocks from DS18.

NICKLE PLATED INTERNAL MATERIALS - Eliminates the possibility of corrosion, rust, oxidation, or premature wear on speaker wire connection points. Ensures you get the longevity out of your system that you expect.

HIGH CONDUCTIVITY COPPER ALLOY - All of DS18's distribution blocks are made with high conductivity copper alloy and chrome plated to maximize the security of your connections. Ensure your wiring is secure, neat, and safe.

High Performance 2 way Copper Car Audio Power/Ground Distribution Block

1-0/2/4 Gauge In,2-4/8/10 Gauge out

High Strength, Nonperishable Industrial-grade Plastic Cover

Item Weight: 13.0 lb

Country of Origin: United States

Brand name: SIEMENS

DISTRIBUTION BLOCK- Input accepts 1/0 2/4 gauge wire, Outputs accepts 4/8/10 gauge wire

EASY TO INSTALL- No Crimping required ,Allen Screw Clamping

INCLUDES- 2 pcs Distribution Block, 4 pcs Screws, 1 pcs Allen Wrenches

Power/Ground Distribution Block

Input: Accepts 0GA(1GA)*1,Outputs: Accepts 4GA*3 Wire

Made of High Performance Copper

Distribution Block-High Performance 2 Way Copper Car Audio Power/Ground Distribution Block

1-0/2/4 Gauge In,2-4/8 Gauge AWG Out

Solid Brass,Gold-Plated for Corrosion Resistance

START WITH THE BEST - Every successful project starts with a solid foundation. These sturdy junction blocks feature a robust, tin-plated brass busbar, a flame-resistant base, and durable stainless steel hardware.

TRULY UNIVERSAL -  In order to work wherever you might need it, we designed each busbar to handle up to 300V AC, 48V DC, and 150A at 32V DC (4,800W). So whether your working on a boat, a car, or an RV, we've got you covered.

YOU'RE COVERED - What's the first thing that always breaks on a busbar? The cover. They're usually thin, rigid, and brittle. Not these covers. Our covers are flexible, flame-resistant, and aren't held on by tiny, breakable clips or easy to lose nuts.

Operating voltage: 0 to 32VDC, No-load current: 2mA(for power indicator LED). Input port: maximum input current 40A, fuse 40A. Output port: 8 output ports, fuse 30A*2, 20A*2, 10A*2, 5A*1, 3A*1.

With power indicator LED. High-quality fuse holder, you can very easy to replace fuse from the outside, ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40A.

Enclosure: High quality aluminum enclosure,thickness 1.5mm/0.06".

【Product Name】- Bus bar terminal block 12v, these battery bus bar 12v will come in pairs, includes one positive bus bar (red) and one ground bus bar (black).

【300A M10 Stud Busbar】- This battery distribution block can handle max 300A continuous amperage at Max 300V AC or 48V DC voltage. Each battery terminal block includes - 6 x M10 (3/8")terminal studs.

【Round Corner Base】 - This 12v bus bar is unique round corner base design, which makes the marine bus bar unique and special, looks more extraordinary compared with others.

High Performance 2 Way Car Audio Power/Ground Distribution Block

1 X 0/2/4 Gauge In, 2 X 4/8 Gauge Out. Forged and Machined Brass Construction for Maximum Power Transfer

Marine-grade Satin Chrome Finish for Superior Corrosion Resistance