Best Jamgoer in 2026

→[Dimensions}: The bus bar is measured (L x W x H): 138 x 69 x 44.5mm (5.433"x2.72"x1.75"). Stud size: M8 (5/16").

→[High Quality]: Bus Material: The battery distribution block is made of brass and nickel plated, which has good electric conduct performance and sturdy rust-resistant. The base is made of nylon - glass fiber reinforced to protect your safety, ensures great mechanical strength and durability.

→[Waterproof & Dustproof]: The power distribution block With four removable side plates, a insulated rear cover, that's designed to withstand rain and dust,resist the air and seawater erosion.

→[Reset Type]: Type 1, ATM Footprint Circuit Protector (Breaker).

→[Material]: UL-Rated 94V0 thermoplastic body. Tin-plated copper alloy terminals.

→[Termination]: Compatible with 280 Type fuse blocks using 0.32" (8.1mm) centerline spacing.

→[Reset Type]: Manual Reset, ATM Footprint Circuit Protector (Breaker). Manual push button reset complies with ABYC circuit protection requirements.

→[Material]: UL-Rated 94V0 thermoplastic body. Tin-plated copper alloy terminals.

→[Termination]: Compatible with 280 Type fuse blocks using 0.32" (8.1mm) centerline spacing.

→[Reset Type]: Type 1, ATM Footprint Circuit Protector (Breaker).

→[Material]: UL-Rated 94V0 thermoplastic body. Tin-plated copper alloy terminals.

→[Termination]: Compatible with 280 Type fuse blocks using 0.32" (8.1mm) centerline spacing.

→[Material]: The rv power inlet plug housing is made from the highest grade polymer which makes unit weatherproof when completely closed. And terminals are made of rust free metal which can corrosion resistant materials and perfect for waterproof and dustproof.

→[Safe Guarantee]: 30 Amp 125 Volt easy power inlet, NEMA L5-30P, CSA approved and UL-listed, safe to use.

→[Funciton]:Easy Lock System, quickly locks the cord set to the inlet without any wiggle or loose, easy to use. Convenient cover design remains open ,4-way right angle rear safety enclosure.

→[Copper Plated with Silver]: 4 terminal pins of battery cable connector made of red copper coated with silver which have strong electrical conductivity and plated to minimize resistance to maximize stability and dependability.

→[High Quality]: 12v battery quick connect disconnect plug each wire harness's Combined shell made from sturdy PC fire-retardant materials allowing for over 10,000 connect/disconnect actions, which provides superior resistance to wear corrosion, water, and heat for its full service life.

→[Easy to install]：Insert the wires into the terminal pin, then solder them. You need insert the terminal pins into the connector housing and lock them in place.Connector ends are identical, so either end is suitable for connection to the power or load side.

→[Load-bearing]: Durable tire-mounted step is 16.92" wide x 8.46" deep stepping pad holds up to 286 lbs, which can accommodate a normal adult standing on it.

→[Foldable for Easy Storage]: The tire steps for pickups can be adjust to 3 positions for different truck tire height and 3 postions for different width.

→[Anti-slip Strip]: The non-slip foldable steps have non-slip strips, which can make you stand on it safer.

Permanently mount a battery connection to any battery.

Lie-flat design for seamless installations with M6 hole size.

Built-in 20A micro-blade fuse for increased safety and protection.

Permanently mount a battery connection to any battery. .Fit Type: Universal Fit

Lie-flat design for seamless installations with M10 hole size.

Built-in 20A micro-blade fuse for increased safety and protection.

Heavy Duty Battery Cables: These 4 AWG Battery Cables feature tinned copper ring terminals, made for use with DC up to 1000V; Also perfect for use with a Spartan Power 150A or 200A Fuse Kit

A Multitude of Uses: Great automotive cable replacements for any type of motorized vehicle, from trucks and cars to motorcycles and motorhomes, RVs, campers, boats, and golf carts; Ideal for DC applications that involve high-voltage batteries where pure copper is recommended

Cut to Length: Our cables are professionally finished with a premium-grade cut, crimping, and heat shrinking that deliver durability, endurance, and the highest performance; Our 100% copper cables are solid yet flexible enough to work in most applications

Ideal for Automotive, Solar and Marine Use - Our 250 AMP 4-post power distribution block busbar is ideal for automotive, car audio, solar, and marine use. Whether you need to consolidate, distribute, or protect your electrical system, our bus bars are excellent for managing wires and distributing power.

Includes Both Red and Black Connectors - With these 2 packs of 4 post power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals with 5/16" holes. The 4-way bus wiring block will make setting up your electrical systems quick, neat, and easy.

Anti-Corrosive & Even Consistent Flow - Our bus bars 12v are anti-corrosive and constructed to handle high currents. The nickel-plated brass contact plate ensures even and consistent flow and stability. Wire up to 4 accessories. Each bus bar terminal block includes a cover to protect connections from damage and corrosion.

Heavy Duty Battery Cables: These 4 AWG Battery Cables feature tinned copper ring terminals, made for use with DC up to 1000V; Also perfect for use with a Spartan Power 150A or 200A Fuse Kit

A Multitude of Uses: Great automotive cable replacements for any type of motorized vehicle, from trucks and cars to motorcycles and motorhomes, RVs, campers, boats, and golf carts; Ideal for DC applications that involve high-voltage batteries where pure copper is recommended

Cut to Length: Our cables are professionally finished with a premium-grade cut, crimping, and heat shrinking that deliver durability, endurance, and the highest performance; Our 100% copper cables are solid yet flexible enough to work in most applications

Heavy Duty Battery Cables: These 4 AWG Battery Cables feature tinned copper ring terminals, made for use with DC up to 1000V; Also perfect for use with a Spartan Power 150A or 200A Fuse Kit

A Multitude of Uses: Great automotive cable replacements for any type of motorized vehicle, from trucks and cars to motorcycles and motorhomes, RVs, campers, boats, and golf carts; Ideal for DC applications that involve high-voltage batteries where pure copper is recommended

Cut to Length: Our cables are professionally finished with a premium-grade cut, crimping, and heat shrinking that deliver durability, endurance, and the highest performance; Our 100% copper cables are solid yet flexible enough to work in most applications

1 Pair of military spec lead alloy positive and negative standard top post connectors for increased strength and reduced corrosion.

Standard 3/8" diameter bolt for lugs mounting, also includes 5/16" diameter short bolt.

Positive and negative are directly marked on the terminal.

BATTERY TERMINAL BOLT: Replaces the standard bolt in the battery terminal with a threaded stud

AUXILIARY CONNECTIONS: Use for power hook-up for direct connections of accessories to battery

ADDITIONAL USES: Helps reduce noise in stereo, communication and other electronic equipment

Heavy Duty Battery Cables: These 4 AWG Battery Cables feature tinned copper ring terminals, made for use with DC up to 1000V; Also perfect for use with a Spartan Power 150A or 200A Fuse Kit

A Multitude of Uses: Great automotive cable replacements for any type of motorized vehicle, from trucks and cars to motorcycles and motorhomes, RVs, campers, boats, and golf carts; Ideal for DC applications that involve high-voltage batteries where pure copper is recommended

Cut to Length: Our cables are professionally finished with a premium-grade cut, crimping, and heat shrinking that deliver durability, endurance, and the highest performance; Our 100% copper cables are solid yet flexible enough to work in most applications

Tubular Lug Ring Eye Terminals 4 AWG - Battery Charger Accessories Cable 3/8 Inches Stud Size Copper Lugs - for Crimping Soldering Pack of 15

Heavy Duty Construction

Close End Pad Seals Out Moisture Keeping Cables Dry

🌎 For Post Size: M10 or 3/8”-16; 12-Way connectors Design: 6 x hole-holders and 6 x threaded studs.

🌎 Battery Post Type: Bolt Down Ends or Threaded Stud. (Remark: Bolt Down Ends including Top Post and Side Post)

🌎 For Battery Type: Lithium and Lead Acid Batteries (AGM, GEL, WET, MF and CA/CA). Support Battery Voltage: 48V, 36V, 24V, 12V, 6V.

SAE to SAE Cable, the sae extension cable works great to connect solar panel to battery, extend the battery maintainer, it's suitable for solar battery connection and transfer, and automotive batteries transfer etc. Work great for Battery Minder charger Minn Kota motors boat & motorcycle batteries. A handy extension for solar charger to atv application, also can trickle charge during cold weather.

The sae cable is made of 14AWG pure copper wire; Cable length:50cm/1.6ft. thick, flexible and durable. The cable is a good size to work with for an automotive solar charger installation. Choose the right size(iGreely provides wires from 18 to 10 awg, length from 2ft to 30ft, just visit our store to search for more accessories) to fit for your need, you can place the solar panels in an area where they have access to full sunlight, let the RV solar panel sit in full sun most of the day.

Come with waterproof dust cap for protecting standard SAE type connector from rain and dust when closed, which stay clean and dry inside when you don't use.

→[Dimensions}: The bus bar is measured (L x W x H): 138 x 69 x 44.5mm (5.433"x2.72"x1.75"). Stud size: M8 (5/16").

→[High Quality]: Bus Material: The battery distribution block is made of brass and nickel plated, which has good electric conduct performance and sturdy rust-resistant. The base is made of nylon - glass fiber reinforced to protect your safety, ensures great mechanical strength and durability.

→[Waterproof & Dustproof]: The power distribution block With four removable side plates, a insulated rear cover, that's designed to withstand rain and dust,resist the air and seawater erosion.

2/0 AWG Battery Cable 3/8 Inches Tubular Lug Ring/Eye Terminals

For Battery and Welding Cables with 12 V Solar Panels and Inverter Cables, 15 Per Package

Heavy duty construction and easy to install copper lugs

3/8" Studs Rated to 440 Amps @ 12 Volts with Momentary 550 Amp Spikes

Mount in Panels up to 7/16" Thick in a 1-17/64" Hole

Durable Nylon Backing Nut Eliminates any Question of Shorting and These Can be Mounted in Metal Panels

🐫 【BATTERY TERMINALS】 The heavy duty Battery Terminal Connectors are held in with a Screw and Make a Tight and Secure Connection. with 2 Protective Covers.

🐫 【POSITIVE NEGATIVE】 Positive (19mm) Battery Terminal + Negative (17mm) Battery Terminal, Provide 2 copper spacer shims in case the posts aren't big enough.

🐫 【EASY TO INSTALL】 0/4/8/10 AWG Gauge Inputs. There are four different sizes of a wiring outlet, easy to modify the wiring. Suitable for Most Models Battery.

HEAVY DUTY LUGS - Crafted from high quality thick copper, these battery lugs make super strong crimps.

PREVENT CORROSION - A thin layer of tin will protect your copper lug terminals from corrosion in harsh environments.

CAN BE CRIMPED OR SOLDERED - These battery lugs can be crimped or soldered to the wire ends depending on your preference.

Mounts with #10 Machine Screws

5/16" Stainless Steel Stud, Lock Washer, and Nut

Red and Black Nylon Construction with Mounting Holes

Type: SAE Quick Release Adapter with Automotive SAE Bullet Connectors. One SAE input with One Sae Outlet

Sae Battery Cable: SPT-2 16AWG/2C, 25FT. Length about 7.5m. Allow you charge your device in long distance . Heavy duty, Thickness, and Durable.

A Wide Range of Application: This sae extender cable make a quick connect for a 12v batter and solar panel, have a widely use in all kinds of vehicles, like motorcycle, lawnmower, ATV , RV, trolling motor, Tractor sprayer, power inverter and other devices you want to charge with 12v sae plug.

Operating voltage: 0 to 32VDC, No-load current: 2mA(for power indicator LED). Input port: maximum input current 40A, fuse 40A. Output port: 8 output ports, fuse 30A*2, 20A*2, 10A*2, 5A*1, 3A*1.

With power indicator LED. High-quality fuse holder, you can very easy to replace fuse from the outside, ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40A.

Enclosure: High quality aluminum enclosure,thickness 1.5mm/0.06".

2 Pack of positive or negative battery terminal clamps, which connects to the positive or negative battery posts with adaptor collars.

Each battery terminal splits the connection to three outputs, one 0/2/4 gauge output and two 4/8 gauge outputs.

Made from forged and machined brass for the best power transfer possible, unlike other cheap zinc battery terminals.

Include: 2 cables, this 2awg (2 ft) battery cable contains a positive (red) and a negative (black) power inverter cable. There is a 3/8” ring on each end.

Material: Pure oxygen-free copper wiring for maximum conductivity. Copper terminals are tin-plated to minimize corrosion, and the oxygen-free copper wiring is a 105 degree flame-retardant outer skin.

Protective cover: PVC insulating sheath, flexible PVC insulation of battery cable, wear-resistant, waterproof, moisture-proof, flame-retardant and heat-insulating, can withstand the harsh test of the car or marine environment, please rest assured to buy.

Product features: brass plate and stainless steel terminals as conductors have low resistance, conductivity and corrosion resistance.

Parameters: maximum voltage: 300 V AC, 48 V DC, maximum continuous current: 130 A AC, 150 A DC.

Scope of application: suitable for automobiles, automobiles, trucks, ships, boats, yachts, etc.