Best Linkitom Boat Trailer Lights in 2026

Partsam ( 2xRed ) Super bright LED Surface Mount 15" Inch Led Trailer Tail light bar, completely sealed & waterproof. These 15 inch tail light bar hard plastic best for flat or even surfaces;

Size: 15.5" x 1.3" x 0.47" and hole distance: 14.5"; Note: This 15 inch led stop turn tail light bar is about really maybe a half inch thick, but with this little knob where the wires all come out, it's about an inch. So you'll probably need to cut out a hole to allow that to go in. And that little spot is about 9/16 inch. So you might need to have a hole saw or punch out a hole there to allow that to go and not cause any issues with that;

Each Red light bar has 11 Diodes for a Bright Performance; Polycarbonate lens is sonic welded to the housing. Applications: This led brake light strip can be perfectly used on semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting. Also you can use on heavy duty trucks like Peterbilt Freightliner Kenworth Mack Western Star etc.;

Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide; NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit;

Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only); Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications;

Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for use on trailers that may be submerged, esp.for a boat trailer. We truly test it under water for 24 hours and it is totally submersible;

Partsam 6Pcs 12v DC clear lens Amber Side Marker trailer Light Mini-Sealed LED Surface mount design; 2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Surface mount to trailer. 2-Wire design. Screws are not included;

These Mini Led Trailer Lights are universal. Generally people use them as clearance, side marker or identification light. We also get feedbacks from our customers using them as strobe lights by connect with the switch or relay. Also some put them on motorhome as position lights, or install them in the truck step running boards as side markers etc.

Size and Brightness: 2.54" x 1.06" x 0.7" and the center to center hole distance: 1.8"; 80 lumen each light with 2 pcs High Quality LED Diodes. So if you use it as turn signals by connecting a on/off switch, but it may not be that bright;

Partsam (4Red+4Amber) Clear Lens 12v DC Side Marker trailer Light Mini-Sealed LED Surface mount design

These are universal.Generally people use them as clearance, side marker or identification light. We also get feedbacks form our customers and they use them for trailer lights 2 for brake lights and two for tail light on each side. Also some put them on motorhome as position lights

Brightness: 80 lumen each light with 2 pcs High Quality LED Diodes; Universal fits for 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Boat Lorry Bus etc.

Package included: this 12v led trailer lights kit has verything you need, 2Pcs square combination tail lights, 8Pcs Mini Oval side fender marker clearance lights (4Red+4Amber), 1Pc 14.17 Inch Red Clearance 3-Lamp Truck Trailer identification light bar, 2Pcs amber Clearance Lights with Reflex Lens, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once;

Multi Functions: Function as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar;

High Btightness: 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side; 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator; Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather;

WONDERFUL DESIGN: This Halo Glow Square Trailer Tail Light kit is visually distinctive from most normal square tail lights on market. The light gives your truck or trailer a distinctive look and it is completely street legal. Our Halo glow tail light has a unique solid light pattern when lit, so your lights stand out from the rest, adding both style and value to your truck or trailer.

FUNCTIONS & LED: This Submersible Waterproof trailer tail light kit serves 7 functions: brake, tail, turn, side marker, side reflector, rear reflector, and license plate light; 32 Diodes ( 20 Red+8 Red+4 Red ) LED Combination stop turn tail light-Curb side; 38 Diodes ( 20 Red++8 Red+4 Red+6 White ) LED Combination stop turn tail light-Street side with license illuminator

SEALED WATERPROOF TRAILER LIGHT & APPLICATIONS: The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board; Compliant with DOT standards, perfect replacement trailer lights for under 80 Inch width towing vechile, like boat trailer, RV, tractors, canoes,truck, trailer, bus, Lorry, Van, caravan, snowmobile etc.

Package includes 2 Pieces 4 inch Round Led Stop Turn Tail Lights Red and 2 Pieces 4 inch Round Led fog back-up reverse Lights White, Round rubber Grommets and 3-prong wire pigtails are included for complete installation;

These Waterproof round led trailer lights 12 LED serves as the following functions: stop light, turn signal light,tail light(red lights) and Backup Lights or Reverse Lights(White lights); Recessed mount with rubber grommets and Pigtails and accepts standard 3-prong plug; These round tail lights are Approx. 5 inch Grommet Ring and 4" inner diameter and 1 3/16" Thickness, Please drill a hole about 4.5" to install; IP65 waterproof and please do not use it under water;

Easy to install: White is the ground, red is the high brightness and Black for low brightness; These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each round trailer light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb; 12 Volt Input;

4.56" long x 3.78" tall x 2.63" deep; trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2" centers;

2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80" trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side)

For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side); Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee;

Package included: this 12v led trailer lights kit has verything you need, 2Pcs square combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15 Inch Trailer 3rd brake identification light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once;

Multi Functions: Function as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar;

High Btightness: 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side; 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator; Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather;

Partsam (2 x White) 4 inch Round /40 LED lamp function as Stop Turn Tail and Brake Backup Reverse Lights.

Application: Trucks,Trailers (Boat, Box, Camper, Transport), 4WD, Caravans, Motor Homes, Boats / Marine, Earthmoving & Mining EquipmentForklifts, Buses and Coaches, Camping, Fishing

Dimensions: 4 inches; LED Quantity: 40 Diodes; Clear Lens White Light.

Truck Trailer Molded 3 prong pigtail harness, Stop / Turn / Tail, Camper RV.

3 Prong Trailer Truck Light Pigtails. Note: The three wires may not follow the "universal" trailer light plug wiring diagram, please just switch the red and white wire for a try. Thanks

Standard 3 prong pattern.

Partsam (2 x Red) 10 diode LED Oval Lights with 4 screw holes for mounting.

Outside surface mount measures 7 1/2" L x 3 1/4" W. Actual light measures 6 3/8" L x 2 1/8" W.

DOT approved. Includes 2 Poly CHROME Trim Rings (snap-on). These are chrome plated. 6 inch polycarbonate housing/lens with poly mount and 3-pin hardwired.

Partsam 4" round 12 LED red tail lights in smoke black lens are general purposed trailer lights which can be used as turn signal, stop brake lights, or just tail lights. These 4 inch round LED tail lights are DOT approved and are submersible, making it suitable to be used on trailers transporting boats, jet skis, or in various other applications where the lights are expected to be exposed to water.

12 LED Diodes; Work on 12v DC, 3 wires with 2 steps Brightness , Can Modify for Signal Light , Flash Light , Emergency Light ( Flasher relay or Controler not included ); Please check the left detailed pictures for the dimensions

Compatible with almost All automobiles and devices equipped with a 8-16 Volt DC power source such as Semi Truck, Semi Trailer, SeRVice Truck, Bus, SeRVice Van, Utility Truck, Enclosed Trailer, Utility Trailer, Boat Trailer, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV Peterbilt, freightliner, international ,Kenworth, mack and lorries etc.

Package included: this low profile 12v led trailer lights kit includes verything you need, 2Pcs Rectangular LED Combination Trailer Tail Lights, 2Pcs 3.9" amber clearance lights, 1Pc 14.17 Inch Truck Trailer identification light bar, 25-ft wiring harness(long enough to reach end of trailer),license plate bracket, mounting hardware and 4pcs complimentary reflective sticker. Provides you with great convenience to upgrade your trailer lights at once;

Multi Functions: this rectangle led trailer light kit function as running light, tail lights, stop light, brake light, turn signal light, , rear reflex reflector, rear clearance light, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar;

Brightness: Left trailer light have 28 diodes which include 16 Red diodes for front light+3 Red diodes for marker light light+3 Red diodes for side light+9 White diodes for license Plate illumination. Right Light have 19 diodes which include 16 Red diodes for front light+3 Red diodes for marker light light+3 Red diodes for side light. Much brighter and lights faster with lower energy consumption, guarantees super visibility and durability;

Package includes 2 Pieces "Dual function" light bar in Clear Lens. It doubles as the DOT required 3 light ID bar required on any vehicle more than 80 inches wide, BUT also includes eight bright white LED lights that can be used as a back up light, Reverse Light, loading light, or light just to help you hook up a trailer at night;

Dimensions: 15.5" x 1.3" x 0.47", Hole Center to Center is 14.5" and surface mounting requiring simple about 0.57" circular cut-out. mounting screws not included; This 11 Diodes low profile waterproof 15" lamp is HARDWIRED with 3 wires: White Wire is the Ground; White+Red, Red 3 light works; White+Black, 8 bright white LED lights works;

This high quality waterproof 15" light bar with ultra-low profile and narrow width can be mounted horizontal, vertical or at an angle and also for use in unique locations where space is a premium. While narrow and thin, it meets FMVSS requirements with a wide angle of bright illumination for maximum safety;