Best 6 Bottle Jacks in 2026

Product 1: Includes 9-pc. 1 in. drive deep 6-pt. impact sockets: 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2 in.; Metal storage case

Product 1: Designed for use with impact wrenches

Product 1: High-torque, 6-point sockets grip flat sides of fasteners, not corners, preventing round-off

Air hydraulic bottle jack is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more; Wide, rugged base adds stability and strength

Features a lifting range between 10-7/16" to 20-1/16" with a 20 ton (40,000 lb) load capacity; Designed for operating either manually or pneumatically

Automatic dual spring controlled lowering system; Fully polished and chromed cylinder rams enhanced with high-performance seals

Product 1: Four leg steel base

Product 1: Made of heavy schedule pipe for added strength and stability

Product 1: Quick and easy height adjustment.Base Length:38.27 inch

Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip

Features a lifting range of 9-7/16" to 17-5/8" with a 20 ton (40,000 lb) capacity; Adjustable screw top extension adds versatility

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance

The 2 ton hydraulic welded bottle jack designed for residential and commercial use that can be widely used for cars,but unsuitable for trucks,suv; Serrated, heat treated saddle provides generous lifting area and secure grip

Lifting range of 6-7/8" to 13-1/4" with 2 ton (4,000 lb) capacity; Lifting height of 4-7/16" and an adjustable screw top extension adds extral height of 1-7/8".Easy to carry and place in the trunk of vehicles,and easily lift car with the bottle jack.

Features a thick drop forged alloy welded steel structure, ensuring durability and reliability. The spiral top with adjustable height increases the jack's versatility and maximum height.

Product 1: QUICK/ EASY: quickly inflates tire sidewall to seat the bead onto wheel rim for all tires up to 24.5”, including regular vehicles, trucks, tractors, RVs, ATVs and more

Product 1: CE APPROVED: heavy duty CE approved all steel construction tank with powder coating finish for durability

Product 1: EASY TO READ GAUGE: accurately fill the tank from standard shop compressor at recommended operating pressure of 87-116 PSI with the included easy-to-read gauge

3TON LONG RAM JACK: Min Height 24.8 inches; Max Height 43.7 inches; Lifting Height 18.9 inches; 3 Ton (6,000 lb) Capacity.

Safety Valve: Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits

Durable and Sturdy: The Ram jack features industrial quality for professional mechanics, hardcore, and home workshop. Labor-saving Long Ram: Long ram jack features a convenient handle with a rubberized comfort grip. Clevis style base allows the jack mounts directly onto most shop cranes..

The product is 2Ton bottle jack

Easy and simple use kit

The product is manufactured in china

[Capacity]:Hydraulic bottle jack is capable of 2 ton(4400 lbs).Lifting min height 7",max height13.3".Adjustable height:1.9".Lifting height:4.4".Weight:4.6(lb).2 Ton bottle jack is use for sedans,suv,travel trailer,station wagon,mini bus and mini-van.Easy to carry and place in the trunk of vehicles

[Durable Welded Frame]:Adopt thick drop forged alloyed welded steel construction of bottle jacks for very sturdy,durable and prevent leak oil.Car jack surface paint is oil-proof and anti-corrosion.Easy to clean

[Automatic Safety Valve]:Each jack is tested for safety. Built-in oil-bypass and secure valve will automatically protect jack hydraulic system when overload.Keep Red bottle jacks from being damaged and keep you safe. Pump handle lifts without any effort and comes down smoothly

50 Ton (100,000 lbs.) Lift capacity

Low-profile design slides into tight spaces

Range: 11 3/4" to 18 7/8".

Handles up to 8-Ton/17636 lbs: This 8-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications.

26" -45.7" Lifting Range: Minimum height: 26 in/66 cm. Maximum height: 45.7 in/116 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 8 tons/17636 lbs. in weight. And the slow release function for reliability and security.

Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift.

Features a lifting range from 24-7/16" to 44-1/8" with a 8 ton (16,000 lb) load capacity

Long ram jack is constructed of heavy-duty steel with a heat-treated chrome cylinder for added strength. Clevis style base provides added versatility

Glide-action pressure pump is designed to lift with minimal effort; Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits

Product 1: Professional heavy-duty jack stand: 12 Ton (26,400 lbs) capacity fits most vehicles; 12-5/8" to 18-1/8" Lifting range; 42.7 lbs for jack stand pair

Product 1: Strudy welded steel construction for superior safety and strength: Each jack stand is equipped with a large chassis design, which greatly increases the stability during use; Heavy gauge steel frame to help prevent distortion or twisting

Product 1: Adjustable pin included: Designed to support column adjusts to different height positions; Lift capacity is widely suitable for cars, sedans, trucks, SUVs, ATVs, UTVs; Steel pin is secured to stand to prevent loss

Heavy Lifting Capacity: Maximum load can reach up to 32 tons. The lifting height adjusts from 10.4" to 16.7". Featured with multi-layer seals and fully polished and chromed cylinder rams, the air hydraulic bottle jack ensures a good sealing performance and reliable operation.

Pneumatic/Manual Operation: Dual operation method is available, manual operation and pneumatic operation. The 32-ton air bottle jack can connect to an air compressor for easy and labor-saving lifting operations. Plus, the high lift bottle jack also comes with a detachable handle for manual lifting in the absence of an air compressor.

Flexible & Reliable Lifting: The height of the air hydraulic jack can be adjusted flexibly from 10.4" to 16.7". High strength piston rod allows for powerful lifting capacity. The non-slip head holds the load securely. With two throttle return springs, the 32-ton air hydraulic bottle jack can be automatically reset after use.

hydraulic jack valve release screw knob comes in two sizes to either the jack screw with a 3/8" and 7/18" diameter valve release screw

It is machined from a solid bar of 6061 aircraft quality aluminum, The knob also has a longer knurled section ,for extra grip.

It slides on over the release screw, turns 1/4 turn then secured in place with a set screw (included) from the end of the knob. You will need to use a 5/32 hex key (Allen wrench)

Air hydraulic bottle jack is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more; Wide, rugged base adds stability and strength

Designed for operating either manually or pneumatically; Features a 20 ton (40,000 lb) load capacity and a lift range between 10-7/16" to 20-1/16"

Automatic dual spring controlled lowering system; Fully polished and chromed cylinder rams enhanced with high-performance seals

Lift range: 7-7/8 in. to 14-1/8 in

Forged steel saddle and cast handle socket

Strong construction makes for a durable lift

Hydraulic bottle jack designed for residential and commercial use; Wide, rugged base adds stability and strength

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance

Operates at temperatures between 40 degrees Fahrenheit and 105 degrees Fahrenheit; Hydraulics are powered with a high-quality oil, offering corrosion resistance

Pro-Lift B-004W Bottle Jack is a welded bottle jack with 4 ton capacity that is designed for for both residential and commercial use. Its serrated, heat treated saddle provides generous lifting area and secure grip.

With the lifting range of 7-1/2" to 14-1/4", it allows you to work in the confined space and fit under low vehicles; and the adjustable screw top extension adds the versatility to allow low pick-up height adjustment and maximum lift height.

Fabricated from hard-cast steel with heat-treated critical stress areas, and the inner/outer welded structure delivers leak-free performance. And, the wide rugged base provides stability and strength. Critical stress points are reinforced for added durability and dependability.

[HIGH LIFT JACK] - This welded jack breaks through the traditional design, which have DOUBLE RAM. You have almost TWICE the lifting height since the second tube does not start extending until the first one reaches its maximum height. On the basis of constant capacity and volume, the max lifting height is up to 24 inches.

[FOR HIGH CLEARANCE VEHICLE] - The minimum height of this jack is 10.43 inches. If your car's clearance is smaller than this height, it is not recommended to use this Jack. It is suitable for high clearance vehicles, such as SUVs, trucks, jeeps, etc.

[STURDY STRUCTURE] - Designed with high-quality alloy steel structure to ensure quality and durability. Inner/outer welded structure, longer service life and stronger overall structure. The pressure pump is designed to lift with minimal effort.

【Specifications】- Material: Alloy Steel; Color: Red; Process: Baking Paint; Operation Temperature: -20~45°C/-4~113°F; Body Height: 26cm/10.23in; Lifting Height: 15cm /5.9in; Adjustment Height: 6cm /2.36in; Maximum Lifting Height: 47cm /18.5in; Housing Diameter: 14cm/5.51in; Base Size: 18.4*16cm/7.24*6.29in; Product Height: 26cm/10.23in; Gross Weight: 20kg/44.44lbs; Net Weight: 17kg/37.47lbs; Loading Capacity: 50T/110231 lbs; Packing Size: 20*17*28cm/7.87*6.69*11.02in;

【Sturdy & Durable Material】- Hydraulic Jacks is made of high-quality alloy steel with baking paint treatment on the surface, which is very reinforced, anti-oxidation, anti-rust, and impact-resistant, for a strong inclusive working environment as well as ensuring a long service life.It uses a rubber oil plug with a seal inside, which ensures a good seal against oil leakage.

【Powerful Lifting Force & Sufficient Lifting Height】- The smooth surface of the piston rod is beautiful, anti-corrosion, and also has strong pressure resistance, with a strong lifting force of 30T/66,138lbs. In addition to the height of the jack body (9.25in), the piston rod (5.7in) and screw rod (2.36in) can be raised to increase the stroke, so that the jack can be lifted higher (up to 17.32in) to a wider range of uses.

10 TON JACK PUMP PARAMETERS--- Output: 10ton; Self height: 4”; Max stroke: 2”; Inner diameter: 1.77” Outer diameter: 2.36”; Weight: 5.5lb. CP-180 pump with oil pressure gauge: Oil capacity: 400cc; High pressure: 60kg/cm²; High pressure flow: 20cc; N.W./G.W.: 7.7lb/8.8lb.

2 INCH STROKE&VISIBLE GAUGE---The spindle of this jack is smooth and it can be jacked up quickly without blockage. When using the jack for the first time, press the handle a few more times to release the air inside the jack before it can slowly rise. The built-in sealing ring can protect the spindle when the stroke is maximum. The pump body is equipped with a visual pressure oil gauge, which allows for observation of pressure changes when the jack is loaded, making it more reliable to use.

EASY OPERATION&COMPACT DESIGN--Before use, tighten the oil return switch of the hydraulic hand pump clockwise, press the handle and the jack will automatically lift up. Loosen the switch after use, the jack automatically will retract without blockage. The jack is not limited to the direction of use. It can be also be used horizontally and upside down, applicable to various occasions. The overall design of this pump and jack combination is compact, easy to handle, and suitable for outdoor work.

Air bottle jack features a lifting range between 10-7/16" to 20-1/16" with a 20 Ton (40,000 LBs) load capacity; It is designed for operating either manually or pneumatically

It has an air pressure range of 100 to 175 PSI; Push-button trigger control increases speed and efficiency, reducing lift time

12 Ton (24,000 LBs) capacity fits most vehicles; 12-5/8" to 18-1/8" Lifting range; 42.7 lbs for jack stand pair