Best Brake Flaring Tools in 2026

Works with 3/16″ (4mm) through 1/2” (14mm) O.D. steel, copper, copper-alloy, & aluminum tubing

Perfect for brake, fuel, transmission, and coolant lines

Three cutting edges ensure clean, even deburring every time.

TUBE AND DIE SET STABILIZING ARM for easy tube forming

MAGNETIC ADAPTER HOLDER keeps adapters in place

EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies

Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant

Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing.

Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle.

With the 16002 you can safely and easily remove brake anchor pins and bushings on virtually all 16-1/2” S-Cam trailer and tractor “Q” brake systems in minutes.

Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.). In the event you are servicing a stamped spider, a punch and chisel may be required to remove the bushing.

The 16002 has a rigid C-frame with 10-ton capacity, and as always, this tool is manufactured from high-grade steel for strength and durability. The compact design enables the operator to service brake anchor pins and bushings while the hub and dust shield remain on the vehicle. Don’t waste your time replacing rusted, seized or broken dust shield bolts; with the 16002, you need only focus on the task at hand.

GM fuel Line Flare, Brake Lines and transmission 5/16 and 3/8"

Flare/double Flare 3/16, 1/4, 5/16, 3/8 and 1/2", metric bubble Flare 4.75, 6, 8, and 10 mm, GM transmission cooling Line 3/8 and 1/2

Fit type: Universal Fit

[VERSATILE] - Easily form 45-degreee double, single, and bubble flares in OE steel, stainless steel, and soft metal tubing

[DIAMETER] - Use with 3/16", 1/4", 5/16", 3/8" diameter lines, which means it will handle your toughest jobs, from brake lines to transmission cooler lines.

[VISE-MOUNTED] - Mount in your vise to help you easily form 45 degree flares in OE steel, stainless steel, and soft metal tubing.

Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 3/16 in. tubing such as brake lines

Works flawlessly with 3/16 in. steel, nickel, and copper tubing

Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots

[Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises

[Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines; For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing

[Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car); 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily

Includes dies for 3/16”, 1/4”, 5/16”, 3/8” tubing.

Creates Single Flares, Bubble Flares, and Double Flares

Easy operation. Mounts in a vise

CPS BLACKMAX BFT850

Ultra-Lightweight R-410A

Clutch-Type Ecentric Flaring Tool

BreakFree Power Flaring Tool. The kit comes with one (1) tool body, one (1) battery, one (1) charger, five (5) sizes of tube clamps ranging from 1/4" to 3/4", one (1) flare gauge, and one (1) carry case.

Quick & accurate flaring in 15 seconds.

Ultra light at ONLY 2.9 lbs.

Covers single double and bubble type flares

Single flare standard lines 3/16 inch - 5/8 inch and single flare metric lines 4 millimeters - 14 millimeters

Double flare standard lines 3/16 inch - 1/2 inch and double flare metric lines 4 millimeters - 10 millimeters

Creates single or double flares on 3/16" / 4.75mm and 1/4" tubing.

Low Profile Design Allows Tubing to be Flared in Tight Spaces.

The vise assembly holds tubing centered securely without marring.

Makes both single and double SAE flares

For more information check the main Lisle tool- 31310

Replacement part for Lisle tool- 31310

🚖VARIOUS APPLICATIONS - Thorstone double flaring tool set is designed to create 45-degree double or single flares in copper, aluminum, magnesium, soft steel brake lines and brass tubing (Not applicable with hard material like steel, iron......).

🚖PACKAGE CONTENTS - 1 flaring cone, 1 flaring bar (flaring yoke), 1 tube cutter, 5 adapters and 1 blow-molded case for easy transportation and storage, meets all your needs.

🚖PREMIUM MATERIAL - The flaring bar and forged yoke is constructed from premium heat treated steel for strength and durability. The chrome swivel is made of alloy steel to reduce friction.

Double flaring copper aluminum soft steel brake line tubing tool kit including 1 flaring cone,1 flaring yoke and 5 adapters; Wide range of sizes - 3/16, 1/4, 5/16, 3/8 and 1/2 inch (4.8, 6.4, 7.9, 9.5, and 12.7 mm).

Swivel is constructed out of alloy steel and chrome plated to assist in reducing friction.

Heavy duty yoke is forged from heat treated steel to ensure durability and strength.

The kit includes 7 PCS flaring adapters.

Flaring tool adapters apply to 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" O.D.tubing.

Heavy duty steel material.

PERFECT 45 DEGREE SINGLE FLARES EVERY TIME! - Tired of cracked & off center Line Flares? LORESO’s professional Brake Line Flaring Tool produces perfect, centered 45 degree single brake & AC line flares without cracking or splitting!

ELIMINATE LINE PUSH-BACK! - Solid flaring bar with extra strong threads and reinforced dual wing nuts allow for extra strong tightening and line-grip without stripped threads and bent wings, as with cheaper Brake Tool Kits!

PERFECT, CENTRED LINE FLARES! - Centered, 45 degree eccentric cone prevents off-center flares, and 5.1in, bend-resistant T-Bar with ergonomic rubber tips generates maximum flaring pressure with less effort!

✅ ALL-INCLUSIVE KIT: Shankly’s standard flaring tool kit is all-inclusive, complete with a professional tubing straightener or cutter, allowing the mechanic to focus on the job rather than search for parts. Please note: this is NOT a double flare tool

✅ MULTIFUNCTIONAL FLARE ADAPTERS: Flaring tool adapters range from the following sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", making this the only brake line kit a mechanic will need. (Metric: 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm)

✅ FITS YOUR APPLICATION: Shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, creating a rugged and long lasting brake repair brake flaring tools

Produces 45-degree flares in soft copper, brass, aluminum and mild steel tubing

Hardened, smooth flaring cone provides fast, 45-degree flares either single or double lap

A single clamp screw allows easy clamping and removal of tubing

Tube flaring tool produces 45 Degree flares in soft copper, brass, aluminum and mild steel tubing.

A single clamp screw of flare tool provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort.

Pipe sizes for the flaring tool are 1/4", 5/16", 3/8", 1/2", 5/8", 3/4".AndFlaring tool kit makes a good flare that fits properly on standard fittings with no leaks.

MAKE DOUBLE & BUBBLE FLARES: The ABN Double Flare Kit & Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more; Fixed head and angles make clean, precise flares; Yoke type compressor with T-bar handle for firm grip; Cone for accurate alignment; For 3/16", 1/4", 5/16", 3/8", 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing; Adapters included

QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing; Pull back the blade and revolve the pipe while compressing; 2 rollers prevent skipping and jumping for most consistent tracking; Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut

BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction; Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion

The single & double flaring tool kit includes wide range of sizes: 5 adaptors-3/16, 1/4, 5/16, 3/8, and 1/2 inch (4.8, 6.4, 7.9, 9.5, and 12.7 mm).

Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing (Not applicable with hard material like steel, iron...). Can be used for brake line , HAVC, air conditioning brass line and so on.

Chrome plated alloy steel swivel reduces friction and helps ensure a smooth, even flare.

【Size】Replacement Steel Adapter for Double & Single Flaring Tool Kit 7 Pc.(3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 inch)

【Premium Material】The forged yoke is constructed from premium Heat Treated Steel, Durable.

【Versatile】This Replacement head used in various types of flaring tools.

【Multifunction】This flaring tool creates 45-degree double or single flares. It can be applied to copper, aluminum, brass, magnesium, and other soft steel lines. Ideal for brake line, HAVC, air conditioning brass line and so on

【Durable Material】Yoke made of heat-treated steel material for maximum strength and longevity. Swivel made of chrome-plated alloy steel to reduce friction

【Applications】Double flaring tool kit suitable for: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8" (5, 6, 8, 10, 12, 14, 16mm) single or double flares; Tubing cutter has a 1/8” to 1-1/8” inches (3-30 mm) capacity with inner / outer reamer

[Brake Line Flaring Made Easy]: To efficiently double or single flare in copper pipe, aluminum, brass, magnesium, and soft steel, use the ABN Brake Line Flaring Tool Kit

[Less Friction for Your Projects]: Excessive friction can cause stress and wear on tools and break tubing; Double flare tool kit includes swivel constructed out of alloy steel and chrome plated to reduce friction

[Built to Last]: Brake flaring tool kit forged from heat-treated steel; Double flaring tool kit will not crack or break under pressure after repeated, extended use

Copper tubing flaring + swaging kit in a combination tubing flaring./swaging kit to fit all your needs

For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing

The 45 degree cone for flare. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing

✅ ALL-INCLUSIVE KIT: Shankly’s standard flaring tool kit is all-inclusive, complete with double flaring capability with a professional tubing straightener or cutter, allowing the mechanic to focus on the job rather than search for parts.

✅ MULTIFUNCTIONAL FLARE ADAPTERS: This double flaring tool feature 7 adapter sizes 3/16",1/4",5/16",3/8",7/16",1/2" & 5/8, making this the only brake line kit a mechanic will need in completing a whole range of brake line flaring tool projects

✅ FITS YOUR APPLICATION: Shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, creating a rugged and long lasting brake repair brake flaring tools

Specifications: this flaring set includes 3/16 in., 1/4 in., 5/16 in. and 3/8 in. double and single flares which are designed to reduce the chance of the tube slipping from the clamp. Double and bubble flares measure 4.75mm, 6mm, 8mm

Equipment Design: with compact design, the in-line flaring tool enables the user to flare copper or soft steel tubing in tight spaces. The double clamp and hex body keeps tube from slipping, keeping flares centered and making flaring easier

Flaring Tool Adapters: in-line flaring set is designed to simplify flaring chores. The design locks the adapter's cone and tube in a perfect line which makes accurate factory flares with less risk of breakage

MULTI USE FLARING TOOL: This is an all in one brake line flaring tool kit device. Easily create precision single flare, double flare, or a bubble in your tubing. A high quality OEM style flare is essential, as nobody likes leaks especially in hydraulic, or brake lines. With the Eastwood tubing flare tool you'll always get quality reliables results time after time!

HOW TO USE: Use stainless steel, steel, or any other soft metal like copper tubing of 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch and 4.75-mm diameter. Meaning this tool is multi purpose and ready to help with automotive brake lines, hydraulic lines, or even with plumbing pipes. Next simply use the rotating turret style flaring die mount to create the suitable flare for your needs.

EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.