Best Navac in 2026

BreakFree Power Flaring Tool. The kit comes with one (1) tool body, one (1) battery, one (1) charger, five (5) sizes of tube clamps ranging from 1/4" to 3/4", one (1) flare gauge, and one (1) carry case.

Quick & accurate flaring in 15 seconds.

Ultra light at ONLY 2.9 lbs.

Sharp and Durable

Ball bearing, easy cutting

Aluminum Alloy, light weight, easy to carry

DC Technology

Automatic Control Valve

Twin Cylinder

SPEED, ROBUSTNESS AND POWER

Precision pressure gauge with Class 0.4 accuracy. Over 100% improvement vs. analog gauges.

Aluminum body with 1/4 turn ball valve handle

Impact-resistant design with durable rubber cover

High performance 6 CFM DC dual stage vacuum pump

Wireless refrigerant scale, precise charging at 0.05% accuracy

·Smart control & Automatic operation

BreakFree Power Tube Bender Kit, 7/8 inch Max OD

Designed for Soft (HVACR) copper tubing

Tubing O.D.: 1/4?, 5/16?, 3/8?, 1/2?, 5/8?, 3/4?, 7/8?

Quickly create single or double flares on 4 different sizes of tubing. Great for making perfect flares on brake lines, transmission cooler lines and fuel lines. Works on steel, stainless steel, and soft metal tubing. Easy and quick operation will save you time and money when creating brake lines on your project.

Includes dies for 3/16”, 1/4”, 5/16”, 3/8” tubing.

Easy operation. Creates Single Flares and Double Flares

Nickel-copper alloy is very flexible making for super easy bending & flaring for installation - You can hand bend our brake lines with no bending tools needed

Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing. Copper Nickel lines are ideal for vehicles experiencing harsh weather and environmental conditions

Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market

Works with 3/16″ (4mm) through 1/2” (14mm) O.D. steel, copper, copper-alloy, & aluminum tubing

Perfect for brake, fuel, transmission, and coolant lines

Three cutting edges ensure clean, even deburring every time.

1/8" to 1/2" diameter.

Deburring tool

Pro grade tool

TUBE AND DIE SET STABILIZING ARM for easy tube forming

MAGNETIC ADAPTER HOLDER keeps adapters in place

EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies

Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant

Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing.

Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle.

With the 16002 you can safely and easily remove brake anchor pins and bushings on virtually all 16-1/2” S-Cam trailer and tractor “Q” brake systems in minutes.

Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.). In the event you are servicing a stamped spider, a punch and chisel may be required to remove the bushing.

The 16002 has a rigid C-frame with 10-ton capacity, and as always, this tool is manufactured from high-grade steel for strength and durability. The compact design enables the operator to service brake anchor pins and bushings while the hub and dust shield remain on the vehicle. Don’t waste your time replacing rusted, seized or broken dust shield bolts; with the 16002, you need only focus on the task at hand.

Tube and die set stabilizing arm for easy tube forming

Magnetic adapter holder keeps adapters in place

Equipped with an enlarged die set compression area for better grip of dies

GM fuel Line Flare, Brake Lines and transmission 5/16 and 3/8"

Flare/double Flare 3/16, 1/4, 5/16, 3/8 and 1/2", metric bubble Flare 4.75, 6, 8, and 10 mm, GM transmission cooling Line 3/8 and 1/2

Fit type: Universal Fit

[VERSATILE] - Easily form 45-degreee double, single, and bubble flares in OE steel, stainless steel, and soft metal tubing

[DIAMETER] - Use with 3/16", 1/4", 5/16", 3/8" diameter lines, which means it will handle your toughest jobs, from brake lines to transmission cooler lines.

[VISE-MOUNTED] - Mount in your vise to help you easily form 45 degree flares in OE steel, stainless steel, and soft metal tubing.

5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm.

COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines.

EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience.

Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 3/16 in. tubing such as brake lines

Works flawlessly with 3/16 in. steel, nickel, and copper tubing

Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots

[Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises

[Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines; For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing

[Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car); 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily

Includes dies for 3/16”, 1/4”, 5/16”, 3/8” tubing.

Creates Single Flares, Bubble Flares, and Double Flares

Easy operation. Mounts in a vise

CPS BLACKMAX BFT850

Ultra-Lightweight R-410A

Clutch-Type Ecentric Flaring Tool

Easily check thread sizes for the most common thread sizes found in automotive braking systems

Check thread sizes for: 1/8" NPTF, 1/4" NPTF, 3/8" x 24, 7/16" x 20, 7/16" x 24, 1/2" x 20, 9/16" x 18, 9/16" x 20, 5/8" x 16

Each size has a male and female end checker

BreakFree Power Flaring Tool. The kit comes with one (1) tool body, one (1) battery, one (1) charger, five (5) sizes of tube clamps ranging from 1/4" to 3/4", one (1) flare gauge, and one (1) carry case.

Quick & accurate flaring in 15 seconds.

Ultra light at ONLY 2.9 lbs.

INCLUDES: This Double Flaring Tool Kit includes one 1/4-inch adapter, a 5/16-inch adapter, and a 1/2-inch adapter and two adapters in each of the following sizes: 3/16-inch and 3/8-inch. These adapter sizes also cover sizes 4.8-12.7mm. Our Double Flaring Tool kit also includes a mini tubing cutter with a 1/8- 5/8-inch capacity and a convenient storage case to ensure that you'll never misplace part of your kit. *Additional adapters available in ARES 18020 - Double Flaring Tool Adapter Set.*

QUALITY: The forged yoke is constructed from premium Heat Treated Steel, and the swivel is constructed of alloy steel with chrome plating to assist in reducing friction.

APPLICATIONS: This versatile Double Flaring Tool kit can be used when flaring a double or a single flare in copper, aluminum, brass, magnesium, and soft steel brake line tubing. **NOTE: This kit is not designed for use with stainless and other hardened steel materials.**

Covers single double and bubble type flares

Single flare standard lines 3/16 inch - 5/8 inch and single flare metric lines 4 millimeters - 14 millimeters

Double flare standard lines 3/16 inch - 1/2 inch and double flare metric lines 4 millimeters - 10 millimeters

Creates single or double flares on 3/16" / 4.75mm and 1/4" tubing.

Low Profile Design Allows Tubing to be Flared in Tight Spaces.

The vise assembly holds tubing centered securely without marring.

Makes both single and double SAE flares

For more information check the main Lisle tool- 31310

Replacement part for Lisle tool- 31310

🚖VARIOUS APPLICATIONS - Thorstone double flaring tool set is designed to create 45-degree double or single flares in copper, aluminum, magnesium, soft steel brake lines and brass tubing (Not applicable with hard material like steel, iron......).

🚖PACKAGE CONTENTS - 1 flaring cone, 1 flaring bar (flaring yoke), 1 tube cutter, 5 adapters and 1 blow-molded case for easy transportation and storage, meets all your needs.

🚖PREMIUM MATERIAL - The flaring bar and forged yoke is constructed from premium heat treated steel for strength and durability. The chrome swivel is made of alloy steel to reduce friction.

Double flaring copper aluminum soft steel brake line tubing tool kit including 1 flaring cone,1 flaring yoke and 5 adapters; Wide range of sizes - 3/16, 1/4, 5/16, 3/8 and 1/2 inch (4.8, 6.4, 7.9, 9.5, and 12.7 mm).

Swivel is constructed out of alloy steel and chrome plated to assist in reducing friction.

Heavy duty yoke is forged from heat treated steel to ensure durability and strength.