Best Delta Bronze Bars in 2026

12-inch bathroom grab bar supports up to 500 lbs of pull force.

Solid brass construction Shower Grab Bar and Oil Rubbed Bronze Finish

Safety Meets Sophistication with These Heavy-duty Grab Bars while Providing Extra Security in The Bath

Easy to Install Indoor/Outdoor Railing - Indoor-outdoor, wet, or dry use, zero maintenance, ready to install. Modular handrail components and simple mounting technology allow Promenaid handrails to be installed quickly and easily by anyone with no special tools or training. Promenaid handrails connect like building blocks, so installation is quick, easy, and strong.

Durable Finish - Elegant satin black anodized handrail finish and satin black painted hardware; Never flake or chip

Simple Twist - Lock brackets clip in anywhere on the railing to always align with studs, pivot to match any stair slope and support 500 lbs. each. Add, remove, or reposition them anytime in seconds. No drilling required

Item Dimensions LxWxH1/4" x 1" x 12" inches

MaterialBrass

Measurement SystemInch

SMOOTH SURFACE:These brass rods have a smooth surface and are wrapped in professional metal wrapping paper. Even long-term storage, the brass rods are as bright as the new ones.

EXACT SIZE: 30cm/12 inch in length ，1/8 inch in diameter

FEATURES: The 1/8 brass round rod is a free cutting brass . It can be easily soldered and brazed and provides good resistance to corrosion.

Supports up to 500 pounds when properly installed

Outside diameter of 1-1/4 inches

Concealed mounting, mounting hardware included

√ Color: Golden

√ Material: Brass

√ Package: 2 Pieces Brass Round Rods

700Brass Grab Bars come in a variety of lengths, finishes and styles to fit your bathroom

Grab bars can help to reduce the risk of falling in the tub or shower, help you to get into and out of the bathtub or shower and assist you in safely lowering and raising yourself from a seated position

Designer finishes that will match your bathroom decor and provide the safety and security of a grab bar

Prevent Falls: The Signature Life Pole provides safety and stability when standing and sitting, stepping over bathtub or shower ledges, or getting into bed; the 2 Sure Stand grab bars can be positioned anywhere along the pole; supports up to 300 pounds

Tension Mounted: Adjust the floor to ceiling transfer pole to fit flat or vaulted ceilings from 7 to 10 feet tall; 2-foot extension piece available for 10 to 12-foot ceilings; the included rubber pads protect both your ceiling and floor from damage

Versatile: Use as a bathroom grab bar, chair standing rail, wheelchair transfer pole, or as a bedside support handle; the comfortable padded handles can be positioned anywhere on the pole; padded handgrips allow the user to firmly grasp the handles

Material:C360 Brass Flat BAR

Features:Good material for DIY craft making

Package Quantity:1pcs,1"（25mm） x 1"（25mm） x 5"（130mm））

Munzong 12 Inch Anti Slip Brass Shower Grab Bar; the non slip Polished Gold Finish knurled surface on middle is superior for safety when you have soapy hands and need to steady yourself

Munzong 12 inch Bronze bathroom handicap rails (1.0 inch diameter) with golden knurled surface are able to support up to 500 lbs of pull force to provide a stable, reliable handhold; Made of anti-rust Brass for a lasting strength and quality.

Concealed screw in secure wall mount design allows for easy, secure installation at any angle, allows you to cover any unsightly screw holes and continue a clean, sleek trend to your bath and shower.

360 brass has good strength and corrosion resistance, and is extremely easy to machine.

0.25" Thickness, 1" Width, 12" Length

H02 Extruded

Material:C360 Brass Flat BAR

Features:Good material for DIY craft making

Package Quantity:1pcs,1/8"（3mm） x 1"（25mm） x 6"

This Metal Magery Brass Flat Bar Stock is the perfect size for your Knife Making and other crafting needs. Metal Magery Brass Bar Stock has a tensile strength range of 15-47 KSI, conforming to ASTM B36.

Great Workability: 360 Brass Flat is ideally suited for applications where strength, good corrosion resistance, electrical conductivity, and non-sparking characteristics are important. Used widely for decorative purposes because of its smooth, shiny gold-like appearance, brass flats are relative easy to polish to a desired luster with minimal effort.

High Quality Brass: Brass Bars have a High malleability and a low melting point, making it easy to machine or form for a wide variety of purposes, including decorative, knife making and other applications.

Product type: Pack of 1 Pieces 1 inch Round Solid Brass Rod Lathe Bar Stock Set

Material: Made of high quality brass, corrosion-resistant, sturdy and durable, smooth surface

Diameter: 25 mm / 1 inch; Length: 30 cm / 11.8 inch

Material:C360 Brass Flat BAR

Features:Good material for DIY craft making

Package Quantity:1pcs,1/4"（6mm） x1"（25mm） x 12"（305mm）

Product type: Pack of 1 Pieces 3/4 inch Round Solid Brass Rod Lathe Bar Stock Set

Material: Made of high quality brass, corrosion-resistant, sturdy and durable, smooth surface

Diameter: 19 mm / 3/4 inch; Length: 30 cm / 11.8 inch

Material:C360 Brass Flat BAR

Features:Good material for DIY craft making

Package Quantity:1pcs,1/4"（6mm） x 1"（25mm） x 12"（305mm））

Material:C360 Brass Flat BAR

Features:Good material for DIY craft making

Package Quantity:1pcs,3/8"（10mm） x 1"（25mm） x 6"

✿ If you are a lover of DIY crafts, you should prepare this brass flat bar, because it is indeed widely used and multifunctional, you will definitely use it.

✿ Brass bar stock is made of brass material,has nice bend-ability and good processability, you can use it according to your requirement.

✿ Brass bar has high strength, high hardness and good plasticity. It can still work well under hot condition and has good corrosion resistance.

Measures 18 inches in length.

1-1/4-inch diameter with a 1-1/2-inch wall clearance.

Includes six #10 x 2-inch screws, which are concealed after installation.

C510 Phosphor Bronze Round Rod

Diameter: 0.437 (7/16 inch)

Length: 12 inches

Continous Cast,Mill Finish,Unpolished, Oversized

ASTM B505. Thickness Tol. +.067" to .142". Temper M07. Contains a minimum of 10% aluminum for strength and weldability, often used for bearings, bushings, valve bodies, and worm gears. Also known as Aluminum Bronze.

Oversized 954 Bronze Bar Stock .500" Thick x 1.50" Width x 6.00" Length

932 bronze, also known as "Bearing Bronze", is a high strength, high endurance, and general purpose industrial bronze.

0.75" Diameter, 12" Length

932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.

16-inch bathroom grab bar supports up to 500 lbs of pull force.

Solid brass construction Shower Grab Bar and Oil Rubbed Bronze Finish

Safety Meets Sophistication with These Heavy-duty Grab Bars while Providing Extra Security in The Bath

20-inch bathroom grab bar supports up to 500 lbs of pull force.

Solid brass construction Shower Grab Bar and Oil Rubbed Bronze Finish

Safety Meets Sophistication with These Heavy-duty Grab Bars while Providing Extra Security in The Bath