Best Pelican Camera Cases in 2026

Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.

Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.

Pelican's Pick N'Pluck foam lets you customize the interior.

Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.

Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.

Pelican's Pick N'Pluck foam lets you customize the interior.

Watertight, crushproof & dustproof

Open cell core with solid wall design

Easy-open double throw latches

WATER RESISTANT CASE: Water Resistant (IP67), crushproof, and dustproof protection for your iPhone, cell phone, camera, GoPro or other portable electronics and valuables. IP67 Certification = water resistant for 30 minutes when submerged at 3.3 feet

FEATURES: Automatic pressure equalization valve (balances interior pressure to keep water out), rubber liner that delivers o-ring watertight protection, carabiner included, stainless steel hinge and latch pins, easy open latch

DIMENSIONS (LxWxD): INTERIOR - 8.25" x 4.25" x 2.25" ; EXTERIOR - 9.88" x 5.59" x 2.63"

Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.

Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.

Pelican's Pick N'Pluck foam lets you customize the interior.

RUGGED PROTECTION: Crushproof high-impact polymer multi-purpose case, heavy duty handles, push button latches and stainless steel lock hasps for the ultimate in affordable gear protection

WEATHER RESISTANT: Cases are sealed against moisture and dust for long-term confidence in harsh conditions

FOAM: Comes with standard density foam that can be cut for a customized fit

15" x 10.5" x 6" Interior Dimensions

Press and Pull Latches

Meets Airline Carry-on regulations

Based on the popular Pelican 1510 case. Molded from the next generation of pelican’s lightweight hpxtm resin that is up to 40% lighter than other Polymer cases

Crushproof, dustproof, with a Watertight O-Ring gasket and an automatic Purge Valve that Balances Air Pressure inside the case

Features rolling stainless-steel bearing wheels, retractable Extension handle, Double-Throw Latches, stainless steel hasp protectors, and Rubber over-molded Handles.

Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.

Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.

Pelican's Pick N'Pluck foam lets you customize the interior. Minimum Temperature -40° F (-40°C). Maximum Temperature - 210° F (99 ° C)

Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring

Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out

Pelican's Pick N'Pluck foam lets you customize the interior

Outer: 19.78" x 15.77" x 7.41" Inner: 18.06" x 12.89" 6.72" - Weighs 9.5 lbs

Waterproof protection for up to 1 meter fully submerged with a rubber gasket lining.

Pressure Equalization Valve - Two Fully Customizable Pull & Pluck Cubed Foam Layers, One Solid Foam Layer and One Layer of Egg-Crate Foam Padding Included.

Pelican is dedicated to growing globally by providing quality products and services that add value to our customers

Pelican's Vision: Protecting all that you value

Pelican includes a wide range of consumer products imbued with the same tough-as-nails DNA as their commercial products

Rogue Series: This waffle designed & crystal clear pelican case for iPhone 12 Pro / iPhone 12 offers ultimate protection with flexibility, something truly out of the box; Made with flexible yet impervious TPU rubber & unique construction to provide extra tear or pierce resitance

10 FT Military Grade Drop Protection: Rouge Series Case for iPhone 12 / iPhone 12 Pro is expertly crafted with a rigid back panel, and shockproof cushion corners create reinforced shield to defend your phone from any drop-up to 10ft, without compromising your device’s functionality; Rigid hard outer shell and soft inner layer combined provide military-spec (MIL-STD-810G) dual layer protection

Multi-Functional Design: A combination of premium quality materials, anti-yellowing coating and anti-scratch technology ensures that your phone case looks newer for longer; Raised edges on both sides prevent scratches or smudges on the rear camera and phone screen

Portable Smooth Rolling Polyurethane Wheels:Portable Rolling Wheels provides smooth mobility.Ensure a quiet and effortless trip over a multitude of terrains and conditions.

Customizable Fit Foam Insert: Extremely well padded inside with the ability to cut the foam how you require; by making it to fit a particular object/item keeps them snuggly in place during transport.

Retractable Pull Handle Design：With our retractable handle design, it can be adjusted to pull. Also can be packed in the car, home with high capacity. Perfectly use of trave and outdoor.

RUGGED PROTECTION: Crushproof high-impact polymer multi-purpose case, heavy duty handles, push button latches and stainless steel lock hasps for the ultimate in affordable gear protection

WEATHER RESISTANT: Cases are sealed against moisture and dust for long-term confidence in harsh conditions

PADDED DIVIDERS: Comes with velcro padded divider panels that you can customize to your desired configuration

Easy To Open with Latches Design:Smarter and easier to open than traditional cases. Start the release and offers plenty of leverage to open with a light pull in just seconds

Customized Fit Foam Inside:According to your size of valueds size, configure the interior foam to fit and keep from the shocks and bumps on the road.

Reinforced Stainless Steel:Provide the added strength and extra security . Beautiful and Functional Injection Molded. Durable use with the solide construction.

PREMIUM HARD CASE: In use with camera and film professionals, military, law enforcement, and hunters worldwide. Watertight, crushproof, and dustproof hard case that comes with a 3 piece foam set. Lockable and TSA approved

FEATURES: Rolling case with strong wheels, lockable and TSA approved, easy open double throw latches, fold down handles, o-ring seal, and automatic pressure equalization valve that balances the interior pressure and keeps water out

DIMENSIONS (LxWxH Inches): Exterior-38.47 x 16.42 x 6.14 ; Interior-35.76 x 13.73 x 5.35 - Weight 16.85 lbs

18" x 13" x 6.7" Interior Dimensions

Press and Pull Latches

Meets Airline Carry-on regulations

✅ Pelican Marine Series: Designed for iPhone 13 with precise cutouts to provide you with easy access to all ports, speakers, cameras, buttons, and other features. Snug-fit wrap perfectly around your iPhone 13. By the way, a free lanyard will come together in the package, it helps to catch your iPhone 13 more easily.

✅ IP54 Certified Case: This case cover is splash-proof and dust resistant.. Dust-resistant port cover helps in keeping dirt out. Whether you are hanging out in raining days, working on the construction sites, or heading for a outdoor adventures, this case will protect your phone from accidental splashes of water or dirt.

✅ Full Body Protection: The scratch-resistant back panel provides shock-absorbing, anti-scratch protection. Soft flexible bumper edges offer extra protection and comfortable touch and does not affect any functions of wireless charging and others.

- OD Green Pelican 1560 case with tan handles & latches.

- Case comes with layered pluck foam.

- Inside dimensions of empty case - 19.92" x 14.98" x 9.00"

Compact and lightweight, watertight and crush proof

Protective rubber liner doubles as O-ring seal

Pressure Equalization Valve, Stainless steel hardware

Ultra protection

Pillow equipment nesting system

Change set up again and again

- Silver & Blue Pelican 1450 with foam.

- Case inside dimensions - 14.66" x 10.24" x 6.12"

- Case comes with Pelican Lifetime warranty.

Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.

Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.

Pelican's Pick N'Pluck foam lets you customize the interior.

Black iM2275 with pluck foam interior.

Automatic Purge Valve - Keeps water and dust out while balancing air pressure

Inside dimensions of iM2275 - 14.12" x 13.19" x 9.90"

Black Pelican 1600TP With TrekPak Divider System

Includes Pelican 1600 TrekPak divider set and 2 locks.

TrekPak customizable inserts.

- Silver Pelican 1560 case with blue handles & latches.

- Case comes with layered pluck foam.

- Inside dimensions of empty case - 19.92" x 14.98" x 9.00"

IP68 Certified Waterproof Protection: A 3.3 feet/1 meter IP68 certified professional floating waterproof phone pouch is perfect for swimming pools, beach, kayaking, fishing, surfing, sailing, skiing, boating, snorkeling, tubing, rafting, showering, sauna, other water park activities and to store your ID; This waterproof pouch will keep your phone full functional and 100% protected from water making it one of the best cruise, vacation and travel essentials / accessories to have (Best for Phone Screen Sizes Up to 6.1 Inches)

Precise Design & Sensitive Touch: Pelican Marine Series waterproof case has an innovative design for easy access to side buttons; Made with high-quality soft TPU material and a Clear Window design on the front for delicate touch and quick response making it easy to see videos and check your email

Fully Protective: This phone pouch comes with a detachable cell phone lanyard that can be worn around your neck or wrist to easily access your phone or ID, allowing you to enjoy your adventures to the fullest; Secure Lock Mechanism allows you to firmly lock and unlock the phone pouch, keeping it completely sealed underwater