Best Jjc Camera Flash Shoe Mounts in 2026

【Standard Shoe Mount Compatible】could be mounted on any camera accessories with 1/4" and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for Sony (a6500 a6300 a6500), cage for Panasonic (gh5 gh4 gh3)

【Wide Application】This shoe adapter allows you to attach a Microphone, Flash, LED, on camera Handle/cages/rig, etc. Fit for all the accessories with 1/4"-20 threaded holes

【Easy to Use】Secure tightly via the two M2.5 screws, and a 1/4" thread hole for you to attach to the camera cage, plate, handles, or other accessories

【CAMERA FLASH SPEEDLITE MOUNT】It can be applied to various flash,Compatible with Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash)

【FLEXIBLE POSITIONING】These flash mounts allow 180° vertical and 360° horizontal adjustment to position the umbrella and flash light in different angle

【1/4" SOCKET AND 3/8" METAL HOTSHOE】1/4" socket and 3/8" metal hotshoe foot on the bottom can be attached on tripod or light stand or any camera accessories with 1/4"-20 or 3/8"-16 thread

Easily attach dslr accessories to camera hot shoe mount or cold shoe mount.

Flash hot shoe mount with 1/4"-20 tripod screw adapter.

To mount your microphone, LED light, monitor to DSLR, camcorder or digital camera, or adapt anything else that has a 1/4-20 receptacle.

Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder.

Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe.

A hole with locking screw in middle specially designed for holding umbrella.

Updated Cold Shoe Flash Stand Adapter. Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe.

Updated: NO SPRING. Never have to worry about the springs falling out again. That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel.(Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount).

Universal 1/4" Tripod Screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand.

Easy to install microphone, LED light, monitor to DSLR, camcorder or digital camera, Flash Remote Trigger or adapt anything else that with a 1/4-20 receptacle

Fits on the hot shoe of most cameras and can connect 2 cameras together

 Includes 2 nuts which can be adjusted

Easy to install microphone, LED light, monitor to DSLR, camcorder or digital camera, Flash Remote Trigger or adapt anything else that with a 1/4-20 receptacle

Fits on the hot shoe of most cameras and can connect 2 cameras together

 Includes 2 nuts which can be adjusted

𝘼 𝙋𝙝𝙤𝙣𝙚 𝙏𝙧𝙞𝙥𝙤𝙙 𝙈𝙤𝙪𝙣𝙩 𝙬𝙞𝙩𝙝 𝙃𝙤𝙩 𝙎𝙝𝙤𝙚 𝙈𝙤𝙪𝙣𝙩 --- ST-06 not only has two 1/4-20 thread Tripod screw which can be used for all tripod and other types of equipment but also has its own hot shoe lock, which can be fixed on the camera hot shoe mount.Compatible with cell phones 🌸4.5~6.5inch.🌸

𝘼𝙣𝙜𝙡𝙚 𝘼𝙙𝙟𝙪𝙨𝙩𝙖𝙗𝙡𝙚, 𝙉𝙤 𝙣𝙚𝙚𝙙 𝘽𝙖𝙡𝙡𝙝𝙚𝙖𝙙 --- The traditional smartphone tripod mount can not adjust the angle, but ST-06 adjustable angle design allows you to fix on the tripod or camera hot shoe mount and adjust the pitch angle without the ball head.

𝟯𝟲𝟬° 𝘼𝙙𝙟𝙪𝙨𝙩𝙖𝙗𝙡𝙚，𝙇𝙖𝙣𝙙𝙨𝙘𝙖𝙥𝙚 𝙤𝙧 𝙋𝙤𝙧𝙩𝙧𝙖𝙞𝙩 𝙎𝙝𝙤𝙤𝙩𝙞𝙣𝙜 --- ST-06 uses 360° rotation design to support shooting from various angles，including landscape and portrail shooting.

Flash hot shoe to 1/4" thread (Updated Solid Metal Connection Base), Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.Note: May Not Work for Sony Flash.

1/4" brass nut in the bottom,work for light stands/ flash holders with 1/4" screw head.

Designed with cold foot, Standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes

【Wide Compatibility】 Standard 1/4” hot shoe adapter is compatible with Sony Canon Nikon Olympus Pentax Panasonic Fujifilm most digital SLR cameras

【Wide Compatibility】 Standard 1/4” hot shoe adapter is compatible with most digital SLR cameras, such as Sony, Canon, Nikon, Olympus, Pentax, Panasonic, Fujifilm, and more

【Flexible Positioning】 The ball head can be adjusted to almost any position, and it can be quickly locked with the adjustment knob

these hot shoe adapter is made of aluminum alloy, and the surface is sprayed with plastic, which is durable and wear-resistant, its thread is universal 1/4 inch

Apply to: 1/4 inch screw adapter can be applied to mount your microphone, LED light, monitor, DSLR, camcorder or digital camera, or adapt anything else that has a 1/4-20 receptacle

Easy to use: this durable 1/4 inch hot shoe adapter allow any devices with standard 1/4 inch screw hole to be installed on a flash hot shoe slot, and includes 2 adjustable nuts. The bottom plate fits securely into DSLR/SLR camera's hot shoe and screws down tightly, and the top bolt then fits into the tripod hole at the rear of the digital recorder and also screws down tightly

Updated Version Flash Bracket- Swivel Light Stand Bracket, Standard Flash Cold Shoe Mount with Photography Umbrella Holder. Updated Parts: Cold Shoe, Metal Locking Wheel.

Cold Shoe Bracket- Updated shoe mount on top to catch your flash speedlite without falling off! Universal cold shoe mount for most DSLR Camera flashes speedlite light Nikon Canon Panasonic Yongnuo Neewer Godox flashes and more. It also works on monitor,ring light, video LED light, studio light,and other flashes rigs that come with a camera shoe type.

Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, which can be converted by yourself, allow the light stand bracket to attach to a tripod or light stand. Note:You will received the flash bracket with the convert screw. Release the screw to get 1/4” thread or 3/8” thread.

Universal Camera Hot Shoe Flash Stand for dslr camera, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax Nissin Sunpak etc Flash, Speedlight (not for Sony).

With 1/4" Metal Tripod Thread on the bottom for mounting on a tripod or light stand.(Tripod/Light stand is not included).

A locking hole on the hot shoe flash stand perfectly matches the locking pin to allow the Speedlight to lock on the light stand.

Universal Lengthen Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket.

Dual Cold Shoe Mount- 1x integrated cold shoe mount; 1x length adjustable cold shoe mount. Adjustable range: 3-3.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,

Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole.

Universal Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket.

Dual Cold Shoe Mount- 1x integrated cold shoe mount;1x length adjustable cold shoe mount. Adjustable range: 0~0.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,.

Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole.

💡Application: Ideal for shooting portraits or events such as weddings, indoor or outdoor photography, etc.

💡Godox S2-Type Bracket: Adjustable for Different Shoe Mount Flashes and Barebulb Strobes, Allowing Depth and Spread Control of the Mounted Light Head. Bowens S-Type Mount, Allows use of studio light modifiers, Suitable for All Bowens Mount Accessories

💡Cold Shoe Flash Mount: Comfortable to hold, making it easy to take your setup handheld. Easily detach the EACHSHOT holder handle from your stand to place the light exactly where you need it.

【4 in 1 Anti-Off Cold Shoe Mount】 3 Side cold shoe + Top Cold shoe mount, supports to mount microphone, flash, LED light, monitor, or other accessories

【Extension 1/4'' and 3/8'' Screw Holes】3 sides with 1/4'' Screw hole, the other 2 sides with 3/8'' screw holes(front side with an Arri locating hole), come with 2 pcs 8/3'' to 1/4'' adapter, can be connect to some accessories, such as magic arm

【Mount Type】 Connects via Cold Shoe Mount or 1/4"-20 Thread Hole

(5Pack) Widely Compatible - International Standard cold shoe mount compatible. Attaches to Any 1/4"-20 threaded hole.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,.

More Secure - This cold shoe adapter has a standard 1/4"-20 unthread hole, plus two M2.5 unthread holes for stronger stabilization by keeping itself in place without moving.Such new design is much more secure than previous version of cold shoe adapter without M2.5 unthreaded holes.

Smart Design - With a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories slide Perfectly in right place.