Best Qiilu Car Hood Vents in 2026

Secure Grip & Never Fall Off: The phone mount for car is armed with an innovative hollow silicone rubber. It can hold your phone more tightly than other silicone arm clips, you can rollover your phone at will, it will not move at all

Firmly Clip: The car phone holder mount has an adjustable handle lock clasp, which can easily and firmly fix the vent mounting clip to the car vent. NOTE: THIS PHONE MOUNT ONLY CAN HOOK ON HORIZONTAL AIR VENT BUT IT CANNOT BE USED ON VERTICAL OR ROUND AIR VENT

Broad Applicability: The ultra-wide adjustable arm design will make the car phone holder suitable for all mobile phones (4.0-7.2 inches), thin cases and other devices (width between 2.55-4.11 inches), such as GPS devices

🚕➤Scope of Application -- Fits for 2007-2017 Jeep Wrangler JK JKU 2/4-Door.

🚕➤Challenging Material -- The hood vent cowl cover is made of high quality ABS plastic, the surface is Carbon Fiber Grain, the material in great finished.

🚕➤Easy Installation -- 3M super double-sided adhesive firmly adheres the air intake cover to the hood, which is very suitable for car modification enthusiasts.

🚗 WINDOW-BLINDS DESIGN - Universal Car Hood Vent Scoop air flow vents cover adopts the window-blinds design style, which is not only beautiful, but also more beneficial for heat absorption and heat dissipation. ATTENTION: DON'T CUT YOUR CAR, JUST STICK IT ON YOUR CAR WITH 3M STICKER WHICH WAS INCLUDED IN THE PACKAGE.

🚗 HIGH QUALITY MATERIAL - Made of high quality ABS, which is lightweight and durable.The universal size is 42.5 cm / 16.7 inches long and 11.5 cm / 4.5 inches wide.

🚗 EASY INSTALLATION - 3M super double-sided adhesive firmly adheres the air intake cover to the hood, which is very suitable for car modification enthusiasts.

[ Intake Hood High Quality] Made of high quality ABS plastic, which is light, resistant to rust, durable and corrosion resistant

[Size] 11.81 x 6.69 x 2.36 inches,As the picture shown

[Easy Installation] The Hood Air Vent Wing Trim comes with an adhesive tape base, you can just put it on by two sided tape, no tools required and without any damage for your car.clean the car surface before sticking.

[RELIABLE QUALITY!] Our universal hood vents are made of high-quality ABS plastic material, painted in bright color, resistant to scratches, stain, rust and corrosion, lightweight and durable. Quality upgrades help to extend the service life!

[COMPATIBILITY] Size: 330*180mm/13 x 7 inch (L*W). Universal for all kinds of vehicles with engine hood or any flat surface, fits for q50, e90, q60, c6, 350z, c300, f30, 328l, etc.

[EASY INSTALLATION] 2 Hood air vents included in the package, each of them has an adhensive tape base, no need any extra tools, double-sided tape that you can easily install these hood vents without leaving any damages and scratches on your car.

Model: Perfectly Fit for Dodge Challenger 2015 2016 2017 2018 2019 2020 2021 UP

High-quality Material: Made of high durable ABS Plastic. Dust-proof, effective for corrosion, deformation and color fade protection

Installation: Easy to install with adhesive tapes, no damage to your car. Clean the dash board panel before installation, and heat the tape a little for better adhesion

【Fitment】Fit for 2007-2019 Jeep JK Wrangler

【Material】 Made of high quality ABS, which is light, durable, anti rust and resistant

【Easy to Install】 Disassemble the convenient bottom support, the card position is accurate, and it is not easy to fall off. Suggest to use the extra sticky tape for consolidation.

【Louver design】: Universal Motors hood shovel-type air vent cover adopts louver design style, which is not only beautiful, but also conducive to heat absorption and heat dissipation.

【Outstanding quality】: Car hood scoop is made of high-quality heat-resistant and ABS plastic, which will not fade or deform. Wear-resistant, scratch-resistant, practical and durable, perfect for automotive exterior parts.

【Increase your car's style】:Hood air vent fit for Focus RS MK2 Style 2008-2011 vents, the appearance is stylish and beautiful, which can make your car more sporty. Please refer to the compatibility of the product. If the original car does not have the ventilation, it cannot be installed.

100% Brand New Aftermarket Air Flow Intake Scoop. Good Quality Abs Plastic, Length: 10.62inch (270mm), Width: 9.84 Inch(250mm), Height: 1.29 Inch(33mm). 1PCS White Air Flow Vent Cover.

Universal Fitment, Easy Installation. No Extra Tools Or Modification, No Cutting Or Drilling (High Quality Concealed Adhesive Foam Tape Included). Please Clean The Surface Of The Car Part Before The Vent Scoop Be Sticked. Won't Fall Off After Firmly Pasted.

Used For Decorative. No Substantial Heat Dissipation Function.

💪 DURABLE BUILD - Made with ABS Plastic and Carbon Fiber Pattern, our Automotive Hood Scoops are built strong to last. Designed to be Car Wash Safe & Withstand Extreme Weather Temps (including Rain, Snow, Hail, Sand & Dust).

😎 COOL DESIGN - The 3D Carbon Fiber Twill Print on your Hood Scoop is sure to impress! Sealed with a Protective Anti-UV Clear Coat to make sure your Carbon Fiber Print stays looking great. Give your ride a new sporty look to stand out from others!

💡 MULTI-PURPOSE - Can be used for Decorative Design or as an Air Flow Intake Performance. Keep your engine cool while improving ventilation & fuel efficiency. Give your ride with a sweet JDM Racing look!

🚗[Universal Size] 🚙Hood vents for cars are 12.99" long and 4.33" width compatible with all kinds of vehicles, make your car particularly cool and distinctive, greatly improve your car shape

🚗[Upgrade Material] 🚙Universal hood vent is painted with bright black for scratch and stain resistance. Adopting high-quality ABS, use the latest glue technology and fix punch-free

🚗[Application Scope] 🚙 Vent air hood is designed by professional car masters. Upgrades your car to look more awesome, fits for q50, e90, q60, c6, 350z, c300, f30, 328l, etc

DECORATION AND PROTECTION:the car hood Vents is cool and simple, perfect fit and does not hurt your car paint, can be blocked scratches.

HIGH STANDARDS:the Car Side Mesh Vent do not fade, no oxidation, simulation are high, easy installation.

EASY TO USE:Easy to mounting, on back with glue so you can directly to peel and stick.

If your car's bonnet doesn't have any hole which you can install hood garnish, Please do not buy this item.

This item perfect fit for 2012 2013 2014 2015 Hyundai Genesis Coupe

Genuine factory item

· Material : Our Universal Car Hood Vent Scoop Louvers vents cover is made of high quality ABS, which is lightweight and durable.

Measures: General-purpose vehicle hood ventilation mask, ventilation mask is suitable for most vehicles.General sizes are 42.5cm / 16.7in long and 11.5cm / 4.5in wide.(Note that you need to know before buying this product that you may need to cut the hood to install)

· Universal Car Hood Vent Scoop vents cover adopts the window-blinds design style, which is not only beautiful, but also more beneficial for heat absorption and heat dissipation.

【High quality material】Air Flow Intake Cover,Automotive ABS decorative air intake scoop turbine hood exhaust cover, made of automotive grade ABS plastic, has light weight, good toughness, and is very durable, with strong stability and is not easily damaged by falling.

【Universal】Bonnet Vent Cover,Airflow intake Scoop Hood is easy to install, and you can attach it to any part of the vehicle surface. This quick and simple decoration sets your vehicle apart. Suitable for all cars.

【Car decoration】Air Flow Intake Scoop,The air intake scoop makes your car particularly cool and distinctive, greatly improving your car's appearance. Car airflow stickers, with their unique appearance, mask damage, give your car a new look, and improve on its level.

Aluminum Construction

Stainless Steel Button Head Fasteners

Universal Fit

Unique Look:The design is elegant and it is very decorative to your beloved car/cover up the small dint/gives car that unique look.

Strong Adhesive:Car air flow sticker will not fell off and is staying put perfectly.

Style: Amazing with modern design style.Make your car cool and distinctive.

Vent material:ABS plastic

Hood vent overall size:approx 16.8"x4.5"x1"

Car hood vent fit on flat surface if the size is suitable

Fitment: Universal hood vent. Suitable for Focus RS MK2 style.

High Quality: Using high-quality ABS plastic with heat and UV resistance, it is wear-resistant, scratch-resistant, and will not fade or deform.

Professional Design: It adopts professional design process, is practical and durable, and has a long service life. It is a perfect car exterior part.

Curboom side vent decal is an universal exterior car accessories.

Using our side vent stiker as your car decor, it can be installed in your car hood，car fender or bumper side, this make your car look sportier.

Our decorative intake is made of High quality ABS.

Scope of Application: Fits for Ford Focus RS MK2.

Practical: Car hood vent scoop air flow vents cover adopts the window blinds design style, which is not only beautiful, but also more beneficial for heat absorption and heat dissipation.

Note: The bonnet will need to be cut, silicone is advised for a more secure fit but not provided.

【Universal Design】The air scoop is just for decorative, no substantial heat dissipation function.Universal Fit For most cars and vehicles.

【Universal Design】The air scoop is just for decorative, no substantial heat dissipation function.Universal Fit For most cars and vehicles.

【Buy Tips】Size (L x W x H): Approx. 10 x 7.1 x 1.4 inch / 25.5 x 18 x 3.3 cm. Before placing an order, please confirm whether the size of the product meets your air outlet size requirements!

Fitment: This air flow intake hood scoop is universal fit for most cars and vehicles. (depend on your car style, please ensure this part fits for your car style before order)

Material: Bonnet vent cover hood made of heavy duty sturdy ABS plastic, aluminum grille mesh for air flow intake

Decorative: The air flow intake scoop is just for decorative, no substantial heat dissipation function. Cool look with Black surface finished, fit on any flat surface

👍 Front Hood Scoop Vent Cover Trim For Subaru WRX STI 2015 2016 2017 2018

👍Material: Made of High Quality ABS Plastic, Strict Factory QC test. Any questions or problem with the items, Do not hesitate to contact us

👍 Function: Personalize and upgrade your car, makes your car much more luxury looking.

Amazing with modern design style

Make your car cool and distinctive

Durable and high strenth

❤【HIGH-QUALITY MATERIAL】❤---Automotive grade ABS plastic, light weight, lightweight and durable. Can be used for a long time, not easy to oxidize. Size: 331*110mm / 13*4.3inch.

❤【FASHION APPEARANCE】❤---Make your car particularly cool and distinctive, and greatly enhance your car's style. , Make your car cool, stylish and attractive.

❤【EASY TO INSTALL】❤---Adhesive tape is attached to the back, easy to install, it will not damage the paint when it is disassembled in the future, without any tools, and will not damage your car. Please clean the surface of the car before sticking, and keep the sticking part dry within 24 hours after installation.

【Wide Application】 The universal car hood vent scoop air flow vents cover can stick on the most parts of your car surface, decorating your car air flow intake part all by yourself.

【Durable in Use】 The air flow vent hood is made of high quality ABS plastic, durable and lightweight. It has a surface plating that make your car more dazzling and looking.

【Give Your Car A New look】The DIY decoration can make your car have a stylish and customized look, if you want personalize and update your car, just get one !

Universal 17'' X 5'' Fit for all vehicles

Color: Matte Black Finish | Material: ABS Plastic

Package Includes: 1x Pair of Hood Vents

Direct replacement -------- Bonnet Air Vent has the same outline as the OE vents. It is manufactured according to standard specifications and directly replaces old or damaged vents.

Easy to install -------- Hood Air Vent includes a template for cutting the hood, with a slot to make it work properly, the valve cover will need to be cut, it is recommended to use silicone to ensure a more secure installation, but Not available.

Decorative effect ------- ABS Hood Air Vent has a stylish appearance, low-key appearance and stylish design, with decorative functions, stylish appearance and improved car grade, making your car look more dazzling.

𝐏𝐞𝐫𝐟𝐞𝐜𝐭𝐥𝐲 Fit for Jeep Wrangler JL JT 2018-2022

𝐆𝐫𝐞𝐚𝐭 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥--Made of high quality ABS,beautiful desigh and will forever not rust,corrode or peel

𝐄𝐚𝐬𝐲 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧--with double-side adhesive tape on back,no need drilling,or any other Installation tool.