Best Self Adhesive Hood Vents in 2026

🚗 WINDOW-BLINDS DESIGN - Universal Car Hood Vent Scoop air flow vents cover adopts the window-blinds design style, which is not only beautiful, but also more beneficial for heat absorption and heat dissipation. ATTENTION: DON'T CUT YOUR CAR, JUST STICK IT ON YOUR CAR WITH 3M STICKER WHICH WAS INCLUDED IN THE PACKAGE.

🚗 HIGH QUALITY MATERIAL - Made of high quality ABS, which is lightweight and durable.The universal size is 42.5 cm / 16.7 inches long and 11.5 cm / 4.5 inches wide.

🚗 EASY INSTALLATION - 3M super double-sided adhesive firmly adheres the air intake cover to the hood, which is very suitable for car modification enthusiasts.

[ Intake Hood High Quality] Made of high quality ABS plastic, which is light, resistant to rust, durable and corrosion resistant

[Size] 11.81 x 6.69 x 2.36 inches,As the picture shown

[Easy Installation] The Hood Air Vent Wing Trim comes with an adhesive tape base, you can just put it on by two sided tape, no tools required and without any damage for your car.clean the car surface before sticking.

【Louver design】: Universal Motors hood shovel-type air vent cover adopts louver design style, which is not only beautiful, but also conducive to heat absorption and heat dissipation.

【Outstanding quality】: Car hood scoop is made of high-quality heat-resistant and ABS plastic, which will not fade or deform. Wear-resistant, scratch-resistant, practical and durable, perfect for automotive exterior parts.

【Increase your car's style】:Hood air vent fit for Focus RS MK2 Style 2008-2011 vents, the appearance is stylish and beautiful, which can make your car more sporty. Please refer to the compatibility of the product. If the original car does not have the ventilation, it cannot be installed.

[RELIABLE QUALITY!] Our universal hood vents are made of high-quality ABS plastic material, painted in bright color, resistant to scratches, stain, rust and corrosion, lightweight and durable. Quality upgrades help to extend the service life!

[COMPATIBILITY] Size: 330*180mm/13 x 7 inch (L*W). Universal for all kinds of vehicles with engine hood or any flat surface, fits for q50, e90, q60, c6, 350z, c300, f30, 328l, etc.

[EASY INSTALLATION] 2 Hood air vents included in the package, each of them has an adhensive tape base, no need any extra tools, double-sided tape that you can easily install these hood vents without leaving any damages and scratches on your car.

· Material : Our Universal Car Hood Vent Scoop Louvers vents cover is made of high quality ABS, which is lightweight and durable.

Measures: General-purpose vehicle hood ventilation mask, ventilation mask is suitable for most vehicles.General sizes are 42.5cm / 16.7in long and 11.5cm / 4.5in wide.(Note that you need to know before buying this product that you may need to cut the hood to install)

· Universal Car Hood Vent Scoop vents cover adopts the window-blinds design style, which is not only beautiful, but also more beneficial for heat absorption and heat dissipation.

【High quality material】Air Flow Intake Cover,Automotive ABS decorative air intake scoop turbine hood exhaust cover, made of automotive grade ABS plastic, has light weight, good toughness, and is very durable, with strong stability and is not easily damaged by falling.

【Universal】Bonnet Vent Cover,Airflow intake Scoop Hood is easy to install, and you can attach it to any part of the vehicle surface. This quick and simple decoration sets your vehicle apart. Suitable for all cars.

【Car decoration】Air Flow Intake Scoop,The air intake scoop makes your car particularly cool and distinctive, greatly improving your car's appearance. Car airflow stickers, with their unique appearance, mask damage, give your car a new look, and improve on its level.

Curboom side vent decal is an universal exterior car accessories.

Using our side vent stiker as your car decor, it can be installed in your car hood，car fender or bumper side, this make your car look sportier.

Our decorative intake is made of High quality ABS.

【Universal Design】The air scoop is just for decorative, no substantial heat dissipation function.Universal Fit For most cars and vehicles.

【Universal Design】The air scoop is just for decorative, no substantial heat dissipation function.Universal Fit For most cars and vehicles.

【Buy Tips】Size (L x W x H): Approx. 10 x 7.1 x 1.4 inch / 25.5 x 18 x 3.3 cm. Before placing an order, please confirm whether the size of the product meets your air outlet size requirements!

Fitment: This air flow intake hood scoop is universal fit for most cars and vehicles. (depend on your car style, please ensure this part fits for your car style before order)

Material: Bonnet vent cover hood made of heavy duty sturdy ABS plastic, aluminum grille mesh for air flow intake

Decorative: The air flow intake scoop is just for decorative, no substantial heat dissipation function. Cool look with Black surface finished, fit on any flat surface

Amazing with modern design style

Make your car cool and distinctive

Durable and high strenth

[High Quality] Gloss black hood vents are made of lightweight ABS plastic for smooth lines and long service time.

[Universal] Size: 16.9"*4.5" (430MM*115MM). Universal for most vehicles with engine hood or any sufficiently large flat surface.

[Function] The heat in the engine compartment can rise and leave through the hood vents in time, thereby reducing the workload of the radiator and increasing the cooling capacity

【Wide Application】 The universal car hood vent scoop air flow vents cover can stick on the most parts of your car surface, decorating your car air flow intake part all by yourself.

【Durable in Use】 The air flow vent hood is made of high quality ABS plastic, durable and lightweight. It has a surface plating that make your car more dazzling and looking.

【Give Your Car A New look】The DIY decoration can make your car have a stylish and customized look, if you want personalize and update your car, just get one !

Suitable For:The car hood air vent trim has self-adhesive in the back, no harm to your car, easy to install, not easy to fall off. It is fit for Land Rover Range Rover Evoque 2012-2018 Discovery

Specification: This exterior hood air vent outlet wing trim in size 32x 10cm/12.6x3.9inch, package include1 pair hood air vent wing trim (2pcs)

Material:The car air outlet wing trim is made of high quality ABS material, which has high reliability, anti-corrosion, wear resistance, lightweight, not easy fading, durable in use

【Applicable Models】: The hood air vent trim cover compatible with Toyota Supra GR A90 A91 MK5 2019-2022, The size of the original car is customized.

【High Quality】: This hood air outlet vent molding sticker trim is made of premium real carbon fiber material. The hand-woven carbon fiber covering , transparent and smooth surface, scratch-resistant and anti-corrosion, durability.

【Unique Style】: According to the original car design, the real carbon fiber front hood vent trim sticker can brighten and improve the monotonous appearance of your original car, add unique color. And protect the hood air vent from scratches and abrasion.

[Specification]: One pair of decorative car air flow vent; Size: 36.5 * 3.7cm / 14.4 * 1.5in

[Universal Fit]: The intake grille can be mounted on any flat surface; Simply stick on the front or side of your car

[Great Decoration]: The decorative hood side trim is great decoration to your car; It makes your car cool and unique

【APPLICABLE MODELS】: The side air intake hood vent cover compatible with Hummer H2 2003-2009, The size of the original car is customized.

【EFFECTIVE PROTECTION】: According to the original car design, the hood air vent trim cover not only improve the monotonous appearance of your original car, but protect your side hood air vent board from scratch and abrasion.

【HIGH QUALITY】: This side vent hood air vent trim cover is made of premium ABS material. Lightweight and durable. Scratch-resistant, protect your vehicle against outside harms.

Wide Range of Application: Suitable for most cars and vehicles to enhance the impressions of your car.

High Quality Material: The hood ventilation hood and grille are made of strong ABS, which is wear-resistant, anti-aging, not easy to damage, high strength, durable and long service life.

Unique Design: The air inlet is just a decoration and has no substantial cooling function. It is a good car air circulation decoration. It enhances the appearance of your car, adds personality, and fits perfectly with your vehicle.

Curboom decorative intake is an universal exterior car accessories.

Using our shark gills car trim as your car decor, it can be installed in your fender flares or bumper side, this make your car look sportier.

Our side vent decal is made of High quality ABS.

Made of Heavy duty sturdy ABS plastic, Cool black finished

Weatherproof, self-adhesive, and removable --- You can make your custom spray plating to match your car

Compatible for Toyota Honda Nissan Mazda Suzuki VW Audi Fiat BMW Chevrolet Ford Car SUV Pickup Truck

【Brand New】100% brand new high quality car air vent wing trim, strictly full tested to ensure the best quality before shipment, safe to use.

【High Quality】The car air outlet wing trim is made of high quality ABS material, which has high reliability, anti-corrosion, wear resistance, lightweight, not easy fading, durable in use.

【Features】The car hood air vent wing trim can prevent the surface from scratches, dust, keeping it clear and new all the time. and fine surface processing creates gloss appearance, adding luxury and elegant sense to it.

【Wear resistant】The Vent car is a practical, scratch-resistant, durable and perfect exterior trim piece

【Ventilation hood】Front bonnet with double-sided adhesive tape for easy installation and secure mounting

【ABS plastic】Hood vents are made of high quality ABS plastic, which is heat resistant and will not fade or deform

【Hood Vents】---Wide Range of Application: The air hood vent is suitable for most cars and vehicles to enhance the impressions of your car

【Hood Vents】---Higher Level: Air hood vent can decorate your car, make your car elegant and beautiful look, and to a higher level

【Automotive Hood Scoops】---Personalized Appearance: The air intake is only decoration, and there is non substantial heat dissipation function, is a good car air circulation decoration

[ Quality Material ] --- These bonnet vents are made of high‑quality ABS plastic, heat‑resistant and anti‑ultraviolet, will not fade or deform.

[ Wide Application ] --- Universal fits on most vehicles with engine hood or any flat surface. It can prevents the bonnet from venting the surface of the wing from scratches, dust.

[ Window-Blinds Design ] --- Universal Car Hood Vent Scoop air flow vents cover adopts the window-blinds design style, which is not only beautiful, but also more beneficial for heat absorption and heat dissipation.

★High Quality★Made of sturdy ABS and aluminum grille mesh.and can be exchanged or refunded at any time if quality problems occur.

★Unique Design★Unique stylish design, a perfect replacement for your old or damaged one, Give you car a classy and customized look.

★Self-adhesive Design★Self adhesive design,Self-adhesive and decorative car hood vent.easy to attach it .

[High quality material]: The decoration of the automobile side network vent is made of high quality ABS plastic, which has anti-scratch and anti-stain properties, waterproof and can be used for a long time.

[Easy installation]: Clean the part that needs to be pasted, ensure that it is dry and dust-free, tear off the glue of the product, paste it directly, and press it for a long time. Note: Do not wash your car for two days after pasting.

[Beautiful and practical]: Our car hood vent decoration stickers, not only can cover the car scratches, but also can increase the beauty of the car, help reduce wind resistance, improve the stability of high-speed driving.

2 Pieces of car hood vent cover decorative sticker

Material: Premium Quality ABS

Self-adhesive tape on the back

👑 You'll Get: 2 x car vent stickers. Dimensions 16.1In (41cm) x width 3.5In (9cm) x thickness 0.6In (1.5cm).

👑 Upgrade Exterior Decoration: The surface adopts glossy black/carbon fiber texture pattern, giving the body an elegant and outstanding appearance. The cool appearance adds style to your car's appearance and makes your car look sportier. Curved design, seamlessly fit to the edge of the car, fine workmanship.

👑 Wear-resistant & Durable: The side fender trim is made of high quality ABS rubber, which is strong, durable, tough and resistant to deformation and damage for long term use.

Fitment: Air wing trim is fit for Land Rover Range Rover 2013-2018, for Land Rover Range Rover Sport 2014-2018, for Land Rover Range Rover Evoque 2012-2018, for Land Rover Discovery 4 2010-2016, for Land Rover Freelander 2 2007-2014. Perfect match to your original car. One hood air ventt wing trim is included in pakcage, total package weight is 215-224g.

Fitment: Air wing trim is fit for Land Rover Range Rover 2013-2018, for Land Rover Range Rover Sport 2014-2018, for Land Rover Range Rover Evoque 2012-2018, for Land Rover Discovery 4 2010-2016, for Land Rover Freelander 2 2007-2014. Perfect match to your original car. One hood air ventt wing trim is included in pakcage, total package weight is 215-224g.

High Quality Material: Car hood vents are made of quality ABS plastic material, lightweight, anti-rust, colorfast and durable. There are different colors to choose, for example, black. It will be your a very good choice.

【Stylish Decoration】: Made of quality ABS, the design is elegant and very decorative for your beloved car. It fits perfectly with the car, does not harm the paint, and masks the scratches that have already occurred. Give your car a unique look. The car hood air sticker is cool and simple, it is a pretty and lovely decoration. With this product your vehicle will look more stylish.

【Weather Proof and Fadeless】: Plastic plus electroplated, will not rust, can be used in any weather. It does not damage the paint or other parts, no need to drill, just paste directly. Suitable for any model of car, it is not easy to fade in any harsh conditions. This car sticker is heat-resistant, hardy and durable, so you don't have to worry even in hot summers and cold winters. It is sturdy and durable, does not break easily and can be used for a long time.

【Strong Adhesive】: With strong adhesive on the back of the car airflow sticker, it is a self-adhesive fender sticker that is easy to install and won't come off. You can install it on a car fender or bumper, no need to cut or drill, just stick it in the right place and it will exert long-lasting adhesion. It can also be easily disassembled when you don't want it. If the temperature is too low during installation, the adhesive can be properly heated to achieve the best results.

【Automotive Hood Scoops】---Wide Range of Application: The air hood vent is suitable for most cars and vehicles to enhance the impressions of your car

【Automotive Hood Scoops】---Higher Level: Air hood vent can decorate your car, make your car elegant and beautiful look, and to a higher level

【Hood Vents】---Personalized Appearance: The air intake is only decoration, and there is non substantial heat dissipation function, is a good car air circulation decoration