Best Plastic Hood Vents in 2026

Tired of constant buildup in your outdoor dryer vents? Our Supurr-Vent Louvered Outdoor Dryer Vent Cover keeps unwanted pests and outdoor elements at bay so you can dry all day

Package includes a dryer vent cover with curved louvers that stay quiet even when they open wide for maximum exhaust flow

Easily fits over your vent opening and can be quickly secured with 4 screws (sold separately)

Utility vent cover: package includes 2 packs hexagonal grid vent hood covers, suitable for louver vent hood cover guard, effectively help your dryer vents isolation from birds, mice and snake

Measurement: each aluminum alloy dryer vent grill is approx. 22.3 x 22.3 x 0.08 cm/ 8.86 x 8.86 x 0.03 inch, soft material for easier to adjust your desired sizes, suitable for 3 inch ,4 inch, 5 inch, 6 inch, 7 inch, 8 inch for your plastic louvered vent cover

Simple to use: vent cover adopts simple and convenient design, which is suitable for louver vent hood cover guard but no need tools or assistance, easy to install and just minutes to do that, also easy to remove and clean (recommended every 6 months)

UNIVERSAL APPLICATION: Our louvered vent cover fits a 4-inch diameter pipe and vent opening, the outside dimensions of the dryer vent cover is 6x6 inches, Please confirm our size before installation. Funmit has most of vent cover replacement parts, include metal and plastic material, please refer to the end of our A+

GREAT HOME IMPROVEMENT: Helps keep wind, rain and snow from entering outdoor dryer vents, also keeps out birds and rodents. Our 4 inch vent cover comes with a high-density mesh, if your lint is too large, you can take out the mesh and use it to avoid accumulation

EASY INSTALLATION: Easy to install louvered vent cap for dryer and bath fan venting

✅【GREATE VALUE PACK】you will get 2 Pcs plastic louvered vent cover with 2 Pcs aluminum alloy dryer vent grill(Standard Dimensions 8.8 * 8.8 * 0.03 inch )and 8 Pcs screws. perfect for 4 inch plastic louvered vent cover.⚠️the distance is 5 1/2” between screw holes.Please check and confirm the size before buying for correct use.

✅【UPGRADED & DURABLE 】►The 4'' Louvered Dryer Vent Cover is made of durable premium quality plastic structure,Prevent the cover from fading damage and cracking due to sun exposure.►Vent cover add UV inhibitors to increase weather-resistant for long service time, and prevent fading, damage and cracking ►louvered vent cover make you never have to worry about your vent hood overheating while it guards your dryer vents from birds, mice, snake, and other pollutions

✅【WIDELY USE】The louvered vent cover with aluminum alloy dryer vent grill can be perfectly used for indoor exhausting, lower noise, perfect for bathroom vents and extractors, air conditioning units, kitchen fans and vents, all home wall vents, gas and electric dryers etc.

Usable indoors and outdoors. Easy to install fresh air exhaust vent cap - grill cover

Paintable plastic components contain UV stabilizer to reduce fading due to exposure to sunlight

Helps keep wind, rain and snow from entering outdoor dryer vents

Quantity: you will get 2 packs hexagonal grid vent hood covers, silver color, aluminum alloy screen ensures long lasting use, great for louver vent hood cover guard

Size: the aluminum alloy dryer vent grill is approx. 8.8 x 8.8 x 0.03 inch, it can be easily adjusted by cutting to get your desired size, suitable for 3 inch ,4 inch, 5 inch, 6 inch, 7 inch, 8 inch for your plastic louvered vent cover

Material: the dryer vent cover is made of good quality aluminum alloy, durable and cuttable, waterproof and rust proof, practical cover for daily using, it can serve you for a long time

📃[DURABLE MATERIALS]:The exterior dryer vent cover is made of 304 Stainless Steel.The Stainless Steel dryer vent cover can be used for long years and perfect for air exhaust.Different from frangible plastic dryer vent cover,our dryer vents for houses are more durable,anti-rust,anti-heat,anti-aging and corrosion resistant .

📃[AUTOMATIC DESIGN]:The easy moving outside lamellas of the dryer vent cover outdoor can provide maximum volume flows.When any pressure is applied from the inside(work with very low air pressure), the ventilation duct grille can easily open the flaps and when it not in use, the one-way shutters will automatically close to keep rain,snow or others out.

📃[MULTIPLE USAGES]:The outside dryer vent covers for house is suitable for ventilation ducts, bathroom vents and smoke extraction equipment, air conditioners, kitchen fans and vents, all home wall vents, heat transfer and ventilation systems, range hood extractors, and part of industrial uses,which can prevent debris into the house.

Manufactured in United states

Easy to use

Highly durable

🚗 WINDOW-BLINDS DESIGN - Universal Car Hood Vent Scoop air flow vents cover adopts the window-blinds design style, which is not only beautiful, but also more beneficial for heat absorption and heat dissipation. ATTENTION: DON'T CUT YOUR CAR, JUST STICK IT ON YOUR CAR WITH 3M STICKER WHICH WAS INCLUDED IN THE PACKAGE.

🚗 HIGH QUALITY MATERIAL - Made of high quality ABS, which is lightweight and durable.The universal size is 42.5 cm / 16.7 inches long and 11.5 cm / 4.5 inches wide.

🚗 EASY INSTALLATION - 3M super double-sided adhesive firmly adheres the air intake cover to the hood, which is very suitable for car modification enthusiasts.

🚕➤Scope of Application -- Fits for 2007-2017 Jeep Wrangler JK JKU 2/4-Door.

🚕➤Challenging Material -- The hood vent cowl cover is made of high quality ABS plastic, the surface is Carbon Fiber Grain, the material in great finished.

🚕➤Easy Installation -- 3M super double-sided adhesive firmly adheres the air intake cover to the hood, which is very suitable for car modification enthusiasts.

Compatible - Perfect fit for 2015 2016 2017 2018 2019 2020 2021 2022 Dodge Challenger SXT only

Design Style - Provides a high class and sport decor style for your Dodge Challenger, this trim can cover existing scratches and prevent your Challenger from scratch and abrasion.

Material - Made of high quality ABS plastic material , Three-layer processing: 1/Background black paint, 2/Matte Black paint

[ Intake Hood High Quality] Made of high quality ABS plastic, which is light, resistant to rust, durable and corrosion resistant

[Size] 11.81 x 6.69 x 2.36 inches,As the picture shown

[Easy Installation] The Hood Air Vent Wing Trim comes with an adhesive tape base, you can just put it on by two sided tape, no tools required and without any damage for your car.clean the car surface before sticking.

[RELIABLE QUALITY!] Our universal hood vents are made of high-quality ABS plastic material, painted in bright color, resistant to scratches, stain, rust and corrosion, lightweight and durable. Quality upgrades help to extend the service life!

[COMPATIBILITY] Size: 330*180mm/13 x 7 inch (L*W). Universal for all kinds of vehicles with engine hood or any flat surface, fits for q50, e90, q60, c6, 350z, c300, f30, 328l, etc.

[EASY INSTALLATION] 2 Hood air vents included in the package, each of them has an adhensive tape base, no need any extra tools, double-sided tape that you can easily install these hood vents without leaving any damages and scratches on your car.

Model: Perfectly Fit for Dodge Challenger 2015 2016 2017 2018 2019 2020 2021 UP

High-quality Material: Made of high durable ABS Plastic. Dust-proof, effective for corrosion, deformation and color fade protection

Installation: Easy to install with adhesive tapes, no damage to your car. Clean the dash board panel before installation, and heat the tape a little for better adhesion

Custom-designed:The backseat air vent cover has been custom-cut specifically for Tesla. Fit all Tesla Model Y 2020 2021 2022.[Important] 2023 Model Y needs to be installed with tape!

Great Protector: With balance holes that won't affect ventilation. Effective block impurities and small items.

Strong Material: Made from durable ABS plastic. Sturdy and durable.

【Fitment】Fit for 2007-2019 Jeep JK Wrangler

【Material】 Made of high quality ABS, which is light, durable, anti rust and resistant

【Easy to Install】 Disassemble the convenient bottom support, the card position is accurate, and it is not easy to fall off. Suggest to use the extra sticky tape for consolidation.

【Louver design】: Universal Motors hood shovel-type air vent cover adopts louver design style, which is not only beautiful, but also conducive to heat absorption and heat dissipation.

【Outstanding quality】: Car hood scoop is made of high-quality heat-resistant and ABS plastic, which will not fade or deform. Wear-resistant, scratch-resistant, practical and durable, perfect for automotive exterior parts.

【Increase your car's style】:Hood air vent fit for Focus RS MK2 Style 2008-2011 vents, the appearance is stylish and beautiful, which can make your car more sporty. Please refer to the compatibility of the product. If the original car does not have the ventilation, it cannot be installed.

100% Brand New Aftermarket Air Flow Intake Scoop. Good Quality Abs Plastic, Length: 10.62inch (270mm), Width: 9.84 Inch(250mm), Height: 1.29 Inch(33mm). 1PCS Black Air Flow Vent Cover.

Universal Fitment, Easy Installation. No Extra Tools Or Modification, No Cutting Or Drilling (High Quality Concealed Adhesive Foam Tape Included). Please Clean The Surface Of The Car Part Before The Vent Scoop Be Sticked. Won't Fall Off After Firmly Pasted.

Used For Decorative. No Substantial Heat Dissipation Function.

💪 DURABLE BUILD - Made with ABS Plastic and Carbon Fiber Pattern, our Automotive Hood Scoops are built strong to last. Designed to be Car Wash Safe & Withstand Extreme Weather Temps (including Rain, Snow, Hail, Sand & Dust).

😎 COOL DESIGN - The 3D Carbon Fiber Twill Print on your Hood Scoop is sure to impress! Sealed with a Protective Anti-UV Clear Coat to make sure your Carbon Fiber Print stays looking great. Give your ride a new sporty look to stand out from others!

💡 MULTI-PURPOSE - Can be used for Decorative Design or as an Air Flow Intake Performance. Keep your engine cool while improving ventilation & fuel efficiency. Give your ride with a sweet JDM Racing look!

【High quality material】Air Flow Intake Cover,Automotive ABS decorative air intake scoop turbine hood exhaust cover, made of automotive grade ABS plastic, has light weight, good toughness, and is very durable, with strong stability and is not easily damaged by falling.

【Universal】Bonnet Vent Cover,Airflow intake Scoop Hood is easy to install, and you can attach it to any part of the vehicle surface. This quick and simple decoration sets your vehicle apart. Suitable for all cars.

【Car decoration】Air Flow Intake Scoop,The air intake scoop makes your car particularly cool and distinctive, greatly improving your car's appearance. Car airflow stickers, with their unique appearance, mask damage, give your car a new look, and improve on its level.

Package Includes: 1 Pair Air Vent Cover (Left & Right)

OE Reference Part Number: 1648804405, 1648804305

Compatible with 2008-2011 Mercedes W164 ML GL Class

HIGH QUALITY MATERIAL: The air vent is made of high quality thicken 304 stainless steel, anti-corrosion , anti-deformation and rust prevention

FINE MESH: This stylish steel wall extractor vent outlet has a fine mesh to keep mouse out and a weather seal to prevent unwanted leaks and drafts.

UV INHIBITOR: Unlike plastic vent cover, our exterior vent cover can resist UV exposure, heat and aging, serving you much longer time and saving a lot of money for replacement.

Vent material:ABS plastic

Hood vent overall size:approx 16.8"x4.5"x1"

Car hood vent fit on flat surface if the size is suitable

Fitment: Universal hood vent. Suitable for Focus RS MK2 style.

High Quality: Using high-quality ABS plastic with heat and UV resistance, it is wear-resistant, scratch-resistant, and will not fade or deform.

Professional Design: It adopts professional design process, is practical and durable, and has a long service life. It is a perfect car exterior part.

【Universal Design】The air scoop is just for decorative, no substantial heat dissipation function.Universal Fit For most cars and vehicles.

【Universal Design】The air scoop is just for decorative, no substantial heat dissipation function.Universal Fit For most cars and vehicles.

【Buy Tips】Size (L x W x H): Approx. 10 x 7.1 x 1.4 inch / 25.5 x 18 x 3.3 cm. Before placing an order, please confirm whether the size of the product meets your air outlet size requirements!

FITMENT: Perfectly fit for Jeep Wrangler JL JLU Sport Sahara Freedom Rubicon & Gladiator JT 2-Door and 4-Door 2018 2019 2020 2021 2022. (NOT FIT JK)

MATERIAL: Made of high-quality ABS plastic material and used polish process for deformation protection, anti-wear and anti-corrosion, lightweight, colorfast and years of trouble-free use. Will not break or crack easily during use.

EASY INSTALLATION: With Double-sided adhesive tape, no drilling or cutting required. Will not damage the original accessories. Pls cleaning surface, and heat the tape by a hair dryer for better adhesion, and press it almost 1 minute.

Fitment: This air flow intake hood scoop is universal fit for most cars and vehicles. (depend on your car style, please ensure this part fits for your car style before order)

Material: Bonnet vent cover hood made of heavy duty sturdy ABS plastic, aluminum grille mesh for air flow intake

Decorative: The air flow intake scoop is just for decorative, no substantial heat dissipation function. Cool look with Black surface finished, fit on any flat surface

❤【HIGH-QUALITY MATERIAL】❤---Automotive grade ABS plastic, light weight, lightweight and durable. Can be used for a long time, not easy to oxidize. Size: 331*110mm / 13*4.3inch.

❤【FASHION APPEARANCE】❤---Make your car particularly cool and distinctive, and greatly enhance your car's style. , Make your car cool, stylish and attractive.

❤【EASY TO INSTALL】❤---Adhesive tape is attached to the back, easy to install, it will not damage the paint when it is disassembled in the future, without any tools, and will not damage your car. Please clean the surface of the car before sticking, and keep the sticking part dry within 24 hours after installation.

👍 Front Hood Scoop Vent Cover Trim For Subaru WRX STI 2015 2016 2017 2018

👍Material: Made of High Quality ABS Plastic, Strict Factory QC test. Any questions or problem with the items, Do not hesitate to contact us

👍 Function: Personalize and upgrade your car, makes your car much more luxury looking.

[High Quality] Gloss black hood vents are made of lightweight ABS plastic for smooth lines and long service time.

[Universal] Size: 16.9"*4.5" (430MM*115MM). Universal for most vehicles with engine hood or any sufficiently large flat surface.

[Function] The heat in the engine compartment can rise and leave through the hood vents in time, thereby reducing the workload of the radiator and increasing the cooling capacity