Best Nilight Car Toggle Switches in 2026

Features: Waterproof 12VDC lighted rocker switch is a miniature rocker switch. Available colors of button: black/blue. "O I" marked on the button.

Materials: Round Waterproof 12V DC illuminated rocker switch is made of nylon 66 and IP65 material. The terminal is made of brass, silver plated.

Function: Waterproof 12 volt marine rocker switch has 3 pins (easy to turn ON/OFF), and SPST (single pole single throw) design with a set of jumpers. The rating is 20A 12VDC.

Perfect Design: Designed to connect and disconnect a DC12V 20A electrical circuit at will, SPST: ON-OFF control; 2 pole design (On/Off), 3rd poles with LED to be connected to earth. Fluorescent lamps will be lighted up when the switch is turned on

Safety Protection: This truck rocker switch control uses copper-plated silver contacts, has good electrical conductivity, and uses high-quality materials and flame-retardant casing for high safety

Easy Installation: Round on-off switch is easy to install, which is just direct setup, and no additional work required, our switch comes with a keyhole slot to prevent unwanted rotation

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

Designed to connect and disconnect an DC12V 20A electrical circuit at will,SPST:ON-OFF 2 pole；LED Color：Blue，Red，Yellow，Green；Type:2 Pins (3 Pins with LED)

When the switch is on, The LED lights will come on；Hole diameter：20mm/0.8"；And it comes with a keyhole slot to prevent unwanted rotation；Pre-wired design:Easy to install, and saves unnecessary cost. Wire length: 200mm/ 7.8"

Coppery pin is connected to the battery negative pole,the next pin is connected to the battery positive pole,the last one is connected to the equipment positive pole

Features: This truck rocker switch control uses copper-plated silver contacts, has good electrical conductivity, and uses high-quality materials and flame-retardant casing for high safety. Equipped with output short circuit, overload & polarity reverse protection. Up to 10000 times of ON/OFF operating life span

Perfect Design: Designed to connect and disconnect a DC 12V 30A electrical circuit at will, SPST:(single pole single throw), ON-OFF control; 2 pole design (On/Off), 3rd poles with LED to be connected to earth. LED on the switch will illuminate when the switch is turned on.

Widely Used: The 12v rocker switch mainly be used in car, ATV, UTV, SUV, wrangler, RV, off road vehicle, truck, boat, yacht & electronics modification, etc. Available for upgrading most wiring harnesses to control LED light bar, LED work lights, fog lamps, headlights, taillights & auxiliary lamps, etc

Designed to connect and disconnect an DC12V 20A electrical circuit at will,SPST:ON-OFF 2 pole；LED Color：Blue；Type:2 Pins (3 Pins with LED)Color：Blue;The rocker toggle switch panel is made of high quality aluminum panel and ABS material, which is durable and waterproof

When the switch is on, The LED lights will come on；Hole diameter：20mm/0.8"；And it comes with a keyhole slot to prevent unwanted rotation

Coppery pin is connected to the battery negative pole,the next pin is connected to the battery positive pole,the last one is connected to the equipment positive pole;Metal panel size：95x65mm//3.7"x2.5"

Special attention: Light only connect to 12V,Can light up

Product Name : Rocker Switch; The rocker switch made of high quality polyamide eP(Nylon PA66), anti corrosion, acid, alkali and heat resistant, Terminals are silver, brand new and long lifetime.

Color: Blue with Light; Type : ON-OFF (SPST); Terminals : 3 Pin; Rating Voltage : AC 250V 6A, AC 125V 10A;Lamp Voltage : 12V

High quality Metal wire drawing face plate, durable; Universal for 12V Car Auto or Power Speediness & Racing Cars.

LED indication light.

Buttons and Switches: 1 x ON-OFF toggle switch + 1 x red engine start button + 3 x toggle switches for additional use; Come with the Relay to control the buttons of this item.

♥【What You Get】Package include: 5 Pcs toggle switch, 5 Pcs waterproof boot cap.High quality combination of products to meet your needs.

♥【Superior Quality】Multiple design points, thickened flexible handle, flame retardant housing, all copper pins, built-in silver contacts, details in place, durable.

♥【Working parameters】Connector Type: 3 terminal pin (ON)/OFF/(ON). Rated Voltage & Current : 15A ,12VDC/250VAC.This momentary switch is a heavy toggle switch.

Product Name: Car Toggle Switch; Material: Plastic,Metal; Color: Black,Red,Silver Tone

Package Content: 4Pcs x Car Toggle Switch; Dimension: 6.7 x 4 x 1.6cm / 2.6 x 1.6 x 0.6 inches(L*W*T)

Position: ON/OFF; Voltage: DC 12V

PACKAGE INCLUDED: 10 PCS x Mini Toggle Switch(DPDT 6 Pin 3 Position ON-OFF-ON ),10PCS xM6 weatherproof Rubber Boot Cap Cover.

SILVER CONTACT BASE:Silver plated Brass terminals make the switch operate stably under 6A 250V.The Contact Base can be replaced as it is separated with the switch head.

HIGH QUALITY INSULATED AND FIRE-RETARDANT MATERIAL:The shell is made with flame-resistant material, safer than normal plastic.

Switch Type: This is a DPST 4-pin ON OFF rocker switch, double blade, single throw design, T125 temperature (-25C to +125C). The switch is rated at 30A 250VAC. Therefore, the switch works well on 120 or 240 volts at 3A, 6A, 10A, 15A, 16A, 20A, 25A, 30A

Switch Voltage: This illuminated rocker switch with red light has a switch light input voltage of AC 110 V to 250 V. When the switch is ON, the switch light will illuminate to indicate the operating status of the device.

Easy Installation: KCD2 KCD4 rocker switches fit 28.5 x 21.5mm panel cutout size and are very easy to install (recessed flush mount version).