Best Titanium Car Tweeters in 2026

3.5-inch High Compression Titanium Bullet Super Tweeters

Max Power: 500 Watts

RMS Power: 300 Watts

Frequency response up to 20,000 Hz and a sensitivity of 107 dB at 1W/1m

Double magnet that efficiently increases the magnetic field into the gap, delivering high sensitivity and low distortion

High Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system

Replace dull factory highs with CS-Series Tweeters.

Neodymium magnets and titanium domes reveal every detail of your music – even with a factory audio system.

A 6dB/octave inline crossover ensures only the proper frequencies are sent to the drivers, and a built-in poly-switch protector gives you peace of mind at higher volume.

65Hz - 22kHz FREQUENCY RESPONSE: Pyle, 6.5” speaker system has a directable 1” titanium dome tweeter and frequency response. This flush mount speaker is pack with exceptional 4-8 ohm impedance rating and impressive 250 watts power handling capability

2-WAY MOUNT SPEAKER: The pair of 6.5” stereo sound speaker has two ways to install: in-wall or in-ceiling flush mount. It has convenient speaker terminals that allow for quick and hassle-free speaker wire connection at any custom installations

FLUSH MOUNT DESIGN: A pair of flush mount design midbass speaker for simple and easy in-wall / in-ceiling installation. The product includes the cutout dimension at 7 7/8'' in diameter x 2 3/4'' in depth

2" COMPETITION COMPRESSION DRIVER - These are the epitome of competition-quality compression drivers. Titanium diaphragm, mylar capacitor crossover, and an aluminum horn included make these the best drivers available.

PEAK POWER HANDLING - At 640W Max and 320W Program Power Handling the PRO-DKH1 titanium compression (horn) driver boasts out-of-this-world power handling for a Pro audio sound you will love.

HIGH-QUALITY MAGNETS - Settle for nothing but the best with a 35 oz Ferrite magnet that produces a wider range of tones and can handle tremendous power at high volumes.

TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look.

POWER YOU CAN COUNT ON - GTX1 ferrite tweeter delivers out-of-this-world power, at 160 watts RMS and 360 watts Max at 4 ohms with build in capacitor filter.

HIGH-QUALITY ALUMINUM FRAME AND DIAPHRAGM - If you like your highs crisp, bright, and loud, aluminum tweeters are exactly what you need. It's light, strong, and produces a bright sound at high frequencies.

Pair of (2) Audiopipe 4" car audio heavy duty titanium super tweeters

400 Watts MAX and 200 Watts RMS per tweeter

Frequency Response: 3k-22kHz

Dynamic balance technology provides rich, clean, and full-range sound by eliminating distortion and resonant frequencies; Premium audio upgrade for total sonic accuracy, studio quality

Ultramarine certified design includes fiberglass reinforced ABS basket, epoxy coated crossovers, waterproof inner and outer surrounds, weep holes for proper drainage, and titanium-plated cones for ultimate waterproof audio

Meticulously conceived, designed, and engineered for advanced high-quality sound; Full range mounting depth (top mount): 2.36 inches; Full range mounting depth (bottom mount): 2.56 inches

300 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style

2 kHz - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferrofluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction

4-8 OHM IMPEDANCE: This car tweeter has 96 dB SPL and 4/8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound

TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look

POWER YOU CAN COUNT ON - PRO-TWX6 Tweeter delivers out-of-this-world power, at 300 Watts RMS and 600 Watts Max at 8 ohms with build in capacitor filter

4" SUPER BULLET TWEETERS - Sturdy 4x4 aluminum throat for easy mounting and aesthetic symmetrical look. Mounting depth of 2.5 inches so they will clear most door panel locations

The heritage of VEGA SERIES SPEAKERS lives on with its iconic red rubber surround, signature midbass response and crystal clear highs.

VEGA SERIES SPEAKERS has provided the VEGA NATION many years of listening enjoyment since 1954.

6” X 9” 2-Way Coaxial Speaker Set, 100W RMS / 500W MAX Power Handling

1 Inch 300 Watt Heavy Duty Titanium Super Car Tweeter (4 Pack)

150 watts RMS / 300 watts peak power

Diamond chrome cutting finish

BULLET TWEETER: 1-inch aluminum/titanium tweeter hits those high frequencies producing great all-around sound.

POWERFUL PERFORMANCE: Pumps 1000 watts peak power handling and 500 watts RMS for full, powerful performance

BUMPING BEATS: Features Kapton high-temperature, 1-inch voice coil for bumping beats you'll love.

200 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 200 watt peak power / 100 watt RMS so you can play your favorite tracks as loud as you want and with style

2000Hz - 20KHz FREQUENCY RESPONSE: This car tweeter compression driver has a frequency response of 2000Hz - 20KHz that will complete your current car woofer enclosure system for full range stereo sound reproduction

8 OHM IMPEDANCE: This car tweeter has 1” flat aluminum voice coil, 99 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound

70v TRANSFORMER: Pyle ceiling speakers feature 70 volt transformer, while an 8 ohm bypass setting allows use with regular home audio receivers and amps. The product is made to produce powerful, rich sound or quiet background music

65Hz - 22kHz FREQUENCY RESPONSE: Pyle 6.5” speaker system has a directable 1” titanium dome tweeter and frequency response. This flush mount speaker is pack with exceptional 8 ohm impedance rating and impressive 250 watts power handling capability

2-WAY MOUNT SPEAKER: The pair of 6.5” stereo sound speaker has two way of installation: in-wall or in-ceiling flush mount. It has convenient speaker terminals that allow for quick and hassle-free speaker wire connection at any custom installations

Pair Rockville RT5 2.8" aluminum car/Pro tweeters with Titanium diaphragm and kapton vc

1" high temperature die cast kapton voice coil/ extremely Loud and clear highs with an amazing frequency response that can even play some mid

Ferro fluid enhanced voice coil cooling/ sensitivity: 96DB at 1W/ 1M

TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look.

POWER YOU CAN COUNT ON - Tweeter delivers out-of-this-world power, at 600 watts Max at 8 ohms with build in capacitor filter.

HIGH-QUALITY ALUMINUM FRAME AND DIAPHRAGM - If you like your highs crisp, bright, and loud, aluminum tweeters are exactly what you need. It's light, strong, and produces a bright sound at high frequencies.

6-INCH COMPRESSION DRIVER: High-output compression driver kit that delivers a crisp, clear sound while balancing out bass-heavy car audio systems

HEAR EVERY NOTE: Hear every beat, word, or bass line with a sensitivity of 110db and an impedance of 8 ohms; Watts Power (P.M.P.O): 400W; Watts Power (R.M.S): 200W

NO SEPERATE FREQUENCY DRIVERS: Powerful ferrite motor and titanium diaphragm can handle concert-level sound at midrange and high frequencies with a response of 1,000 to 20,000 Hz; 134mm x 17mm Ferrite magnet

20mm amorphous-titanium-coated pps (Polyphenylene sulfide) dome tweeter

High-performance strontium magnet

Built-in lc network attached at end of speaker cable

What's in the Box: (1) HT120 Tweeter pre-Installed in an aluminum horn, Mounting Screws, Warranty Card, Owner's Manual

Rockville HT120 360w Aluminum Horn Titanium Tweeter with 2" Voice Coil, Top of the line Rockville high frequency driver pre installed in an aluminum horn, Titanium diaphragm tweeter, Bolt-on style system, Type: Compression driver

RMS Power: 120W, MAX Power: 360W, Sensitivity: 105dB @ 1w / 1m, 34 oz Magnet, 2” High Temperature Die Cast Kapton Voice Coil

TWO NEW PYLE **PDBT78** 2" 1400W Titanium Bullet Horn Tweeter

MAX Power Handling: 700 Watts per tweeter (1400 watts per pair)

RMS Power Handling: 350 Watts per tweeter (700 watts per pair)

TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look.

POWER YOU CAN COUNT ON - GTX1 tweeter delivers out-of-this-world power, at 120 watts RMS and 240 watts Max at 4 ohms with build in capacitor filter.

HIGH-QUALITY ALUMINUM FRAME AND DIAPHRAGM - If you like your highs crisp, bright, and loud, aluminum tweeters are exactly what you need. It's light, strong, and produces a bright sound at high frequencies.

KICKER 46CSS694 6x9" 900w Car Audio Component Speakers w/ 0.75" Tweeters CSS69. Fits nearly every car made. 12dB crossovers with a smaller footprint for easier installation. Three-position tweeter switch for dialing in your highs. EVC (Extended Voice Coil) technology help deliver remarkable bass response. Titanium tweeter construction and neodymium magnets to reveal subtle details

Sun Light Treated poly-foam surround assists with precise linear excursion. Phase plugs in the woofer cones eliminate any distortion. Steel mesh grilles protect your drivers. Three tweeter mounting options including flush, angled and surface pods. Dimension (L x W x H): 15.125 inch x 12 inch x 4.625 inch. Weight: 9 lbs. Woofer Size: 6x9 in. (160x230 mm). Tweeter Size: 3/4 in. (20 mm)

Dome Material: Titanium. Peak Power: 450 Watts per speaker / 900 Watts per pair. Continuous Power (RMS): 150 Watts per speaker / 300 Watts per pair. Effective Frequency Range: 30Hz - 21kHz. Woofer Mounting Hole Diameter: 5-5/8 x 8-7/16 in. (143x215 mm). Woofer Bottom Mount Depth: 3-3/16 in. (81 mm). Flush Mounting Tweeter Hole Diameter: 1-9/16 in. (40 mm)

New 2019 Model With Clear Bullet Pair of 1" NX Series Pro Audio Titanium Bullet Horn Tweeters Power Handling: Peak: 400 Watts Per Pair / 200 Watts Each Tweeter RMS: 200 Watts Per Pair / 100 Watts Each Tweeter

High-Frequency Range of 3,000-20,000 Hz Recommended Power Range: 15 - 100 Watts RMS Per Channel High-Efficiency Bullet Tweeter Improves Treble Response Loaded Tweeter Acts Like A Piston To Pump Air

Machined Aluminum Chassis Acrylic Phase Plug Die-Cast Aluminum Frame Diamond Black Cutting Finish

Power RMS/MAX: 300W / 600W. Excellent Transient Response and Low Distortion.

Offers a Frequency Response of 2KHz-25KHz with 4 or 8 Ohms of Impedance and 106dB of Sensitivity.

Ferro fluid enhanced voice coil for a long lasting durability. Overall Dimensions: 4"x 4"x2.5”

New 2019 Model With Clear Bullet Two Pair of 1" NX Series Pro Audio Titanium Bullet Horn Tweeters Power Handling: Peak: 400 Watts Per Pair / 200 Watts Each Tweeter RMS: 200 Watts Per Pair / 100 Watts Each Tweeter

High-Frequency Range of 3,000-20,000 Hz Recommended Power Range: 15 - 100 Watts RMS Per Channel High-Efficiency Bullet Tweeter Improves Treble Response Loaded Tweeter Acts Like A Piston To Pump Air

Machined Aluminum Chassis Acrylic Phase Plug Die-Cast Aluminum Frame Diamond Black Cutting Finish

200 Watts RMS / 400 Watts Peak Power Handling - 20 oz. Magnet Structure

Midrange / Tweeter Compression Driver - 1.35'' (34.4mm) Flat Aluminum Voice Coil - Titanium Diaphram

Sensitivity (1w/1m):104dB SPL - Frequency Response: 1kHz ~ 20kHz

BRAND NEW *Pyramid TW57* 3'' 2000 Watt Titanium Super Tweeters

1000 Watts Peak Power (2000 Watt Pair)

Die Cast Aluminum Frame

IT'S NOT JUST LOUD,IT'S CLEAN! Utilizing a spun and CNC aluminum construction, chambered Neodymium motor with integrated heatsink fins cast and milled into the motor housing we were able to produce a compact yet large output super tweeter.

POWER YOU CAN COUNT ON.Neodymium tweeter at 100 watts RMS and 200 watts Max at 4 ohms with build in capacitor filter.

HIGH-QUALITY CNC ALUMINUM FRAME WITH AN ULTRA-LIGHT TITANIUM DIAPHRAGM FOR MININAL BREAKUP AT EXTREMELY HIGH SPL. The faceplate, mounting flange and horn assembly are sculpted for minimal acoustic diffraction and with aesthetics in mind. Combined together these create outstanding accuracy and output.

Heavy Duty Titanium Super Car Audio Tweeters (4 Tweeters)

MAX Power Handling: 500 Watts per tweeter (2000 Watts per 4 Tweeters)

RMS Power Handling: 250 Watts per tweeter (1000 Watts per 4 Tweeters)