Best Crossover Car Tweeters in 2025

TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look.

POWER YOU CAN COUNT ON - PRO-TW120B ferrite tweeter delivers out-of-this-world power, at 120 watts RMS and 240 watts Max at 4 ohms with build in capacitor filter.

HIGH-QUALITY ALUMINUM FRAME AND DIAPHRAGM - If you like your highs crisp, bright, and loud, aluminum tweeters are exactly what you need. It's light, strong, and produces a bright sound at high frequencies.

High Performance 1-inch Aluminum Dome Component Tweeters with Silk Edge

Peak Power: 320 Watts (Pair) | RMS Power: 80 Watts (pair)

Sensitivity: 92 dB, Impedance: 4 Ohms

450 Watts Max Power (100 Watts Nominal)

16mm polyetherimide Tweeter with Neodymium Magnet

2-3/4” Carbon and Mica reinforced Injected Molded Polypropylene - IMPP Cone

MIDRANGE THAT HANDLES IT ALL - A mid-range driver that can answer the call to handle the most significant part of the audible sound spectrum. A speaker that sounds great with just instrumentals and, even better with vocals.

POWER YOU CAN COUNT ON - THE PRO-X6.4BM delivers an impressive 500W Max Power with 250W RMS at 4 Ohms, enough to tackle a full range of audio.

TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look.

The PP4-NT Punch Pro is a 1" high efficiency horn tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions

Featuring a neodymium motor structure, high power diaphragm, combined with a billet machined aluminum phase plug, creating a highly sensitive speaker that is built for high output at extreme volume

Pro series 4 Ohm 1" tweeter with power handling of 50 Watt RMS/100 Watt Max power and requires a mounting depth of 2.52" (64 mm) Large Trim Ring / 1.79" (45.5 mm) Small Trim Ring

1" V-Series Component Tweeters

Neodymium Motor

80W Max

Aluminum Dome Tweeters – The tweeters utilize WideSphere Technology for exceptional musical reproduction, developing a wider listening area for off axis listening, creating a sweet spot in the sound stage from even the smallest speakers.

Superior Bass – MB Quart Formula speakers use butyl rubber surrounds to provide durability and deeper mid-bass impact with clean, undistorted power to create the high quality sound system your vehicle needs.

Cooling System – The over-coil air exchange allows air to pass over the voice coil through the spider, and Kapton voice coil former material is lightweight and efficiently dissipates heat making for a long lasting, high quality sound system.

Replace dull factory highs with CS-Series Tweeters.

Neodymium magnets and titanium domes reveal every detail of your music – even with a factory audio system.

A 6dB/octave inline crossover ensures only the proper frequencies are sent to the drivers, and a built-in poly-switch protector gives you peace of mind at higher volume.

TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look.

POWER YOU CAN COUNT ON - GTX1 ferrite tweeter delivers out-of-this-world power, at 160 watts RMS and 360 watts Max at 4 ohms with build in capacitor filter.

HIGH-QUALITY ALUMINUM FRAME AND DIAPHRAGM - If you like your highs crisp, bright, and loud, aluminum tweeters are exactly what you need. It's light, strong, and produces a bright sound at high frequencies.

2" COMPETITION COMPRESSION DRIVER - These are the epitome of competition-quality compression drivers. Titanium diaphragm, mylar capacitor crossover, and an aluminum horn included make these the best drivers available.

PEAK POWER HANDLING - At 640W Max and 320W Program Power Handling the PRO-DKH1 titanium compression (horn) driver boasts out-of-this-world power handling for a Pro audio sound you will love.

HIGH-QUALITY MAGNETS - Settle for nothing but the best with a 35 oz Ferrite magnet that produces a wider range of tones and can handle tremendous power at high volumes.

Dynamic balance technology provides rich, clean, and full-range sound by eliminating distortion and resonant frequencies; Premium audio upgrade for total sonic accuracy, studio quality

Ultramarine certified design includes fiberglass reinforced ABS basket, epoxy coated crossovers, waterproof inner and outer surrounds, weep holes for proper drainage, and titanium-plated cones for ultimate waterproof audio

Meticulously conceived, designed, and engineered for advanced high-quality sound; Full range mounting depth (top mount): 2.36 inches; Full range mounting depth (bottom mount): 2.56 inches

High Quality Sound – The Neo-Mylar soft dome tweeters utilize impact resistant tweeter elements that produce incredible sound quality and increased reliability in your speaker system.

Lightweight & Durable – The Hifonics Zeus car speaker series are made with durable, lightweight material that minimizes distortions and produces musical midrange and bass tones for a high-powered music experience that fits your style.

Designed to Fit – Vehicle speakers designed to save space and fit nearly any application. Included grills provide protection against accidental damage and take up minimal room to fit the needs of your vehicle of choice.

CONE: Made From Polyurethane, The CH6920 6 x 9 Inch Car Speakers Provide a Resilient And Durable Material That Can Offer Great Sound With The Advantage Of Long Lasting Speakers

VOICE COIL: Our Voice Coils Are Able To Withstand High Temperatures Yet Maintain Its Strength And Fatigue Properties Giving Them The Advantage Of Longer Play Times With Lower Weights

SURROUND: We Use Rubber In A Lot Of Our Speakers. It Has The Ability To Endure Much Punishment Without Any Sign Of Damage. It Compliments The Whole Structure Of The Speaker By Allowing Constant Abuse Where It Is Most Needed, Without The Wear And Tear

The heritage of VEGA SERIES SPEAKERS lives on with its iconic red rubber surround, signature midbass response and crystal clear highs.

VEGA SERIES SPEAKERS has provided the VEGA NATION many years of listening enjoyment since 1954.

6” X 9” 2-Way Coaxial Speaker Set, 100W RMS / 500W MAX Power Handling

300 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style

2 kHz - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferrofluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction

4-8 OHM IMPEDANCE: This car tweeter has 96 dB SPL and 4/8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound

SOLD AS PAIR | BEST CAR SPEAKERS IN THE MARKET | Looking for new car speakers? Look no further as our great speakers are the best replacement for your factory speakers! These high quality black car speakers has a shallow depth of 1.59 inches and churn out great sound quality with its high powered Flux Y30 Strontium Ferrite Magnets contained in a custom tooled heavy gauge powder coated steel baskets. These awesome speakers are guaranteed to sound much better than your stock speakers!

GREAT SOUND QUALITY | These Car Audio Speakers blow out other coaxial audio speakers in the market! These great sounding 6.5 Inch coaxial speakers have 2 Way Tweeter Plates and High-Energy Y30 Magnets ensuring sufficient magnetic force needed for high sensitivity and accurate sound reproduction! Additional features are: 60W RMS / 250W Peak @ 4 Ohm, 90dB, 60Hz - 20kHz, 12dB crossover, 2.48” Mounting Depth, Paper Cone, and 13mm dome tweeters!

GUARANTEED TO LAST | Are you frustrated with those poor quality factory car door speakers and those from other brands that blow out over time? These heavy duty, cool car speakers are guaranteed to last and is made of 1 inch High Temperature KSV Voice Coil, High Quality Cloth Spider with Polyester Fiber, Custom Laminated Paper Cone With Butyl Rubber Surround, and Rugged Construction to withstand the harshest mobile environment!

BULLET TWEETER: 1-inch aluminum/titanium tweeter hits those high frequencies producing great all-around sound.

POWERFUL PERFORMANCE: Pumps 1000 watts peak power handling and 500 watts RMS for full, powerful performance

BUMPING BEATS: Features Kapton high-temperature, 1-inch voice coil for bumping beats you'll love.

Includes: (2) 6.5” speakers, (2) tweeters, (2) Crossovers, (2) Grills, Flush, and surface Mounting accessories Speaker wire

Rockville RV65.2C 6.5"/6" Component car speakers (pair). Peak Power Rating: 750 Watts per Pair / 375 Watts Each. Injection Molded Polypropylene woofer cone gives amazing bass and mids. Flex Motion Butyl Rubber Surround.

1.2” PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover, 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality basket. Rubber magnet boot cover.

360 WATT POWER: Pyle offers a pair of car speakers with a power of 180 Watt RMS to 360 Watt peak with 4 ohm impedance that will produce high-quality sound resonance. Play your favorite tracks as loud as you want and with style

6.5 INCH SPEAKERS: A clean-cut automotive speaker that boasts the size of 6.5” x 6.5” x 2.52” black high-quality poly injection speaker cone. Enhances car stereo by producing powerful audio sound. Also has 25oz high-density rubber magnet boot

¾ INCH PIEZO TWEETERS: These speakers for the car are made entirely of massive butyl rubber surround for durability. The two-way speaker system introduces ¾” piezo tweeters, and 0.5” neodymium PEI dome midrange in each speaker

6-1/2" 2-way component speaker set (4 Bass, 4 Tweeters, 4 Crossovers)

170 watt RMS with 500-watt peak power for the Pair

Aluminum Voice Coil: 1" / Imp: 4 Ohm / Freq Resp: 32Hz-22kHz

400 Watts, 4 Ohm Mini Tweeter Piezo Electric Super high frequency

Stereo Piezo Electric Tweeters Frequency Range of 94dB/W/M

Frequency response: 4500 – 30000Hz / 4.5KHz - 30KHz

What's in the Box: (1) HT120 Tweeter pre-Installed in an aluminum horn, Mounting Screws, Warranty Card, Owner's Manual

Rockville HT120 360w Aluminum Horn Titanium Tweeter with 2" Voice Coil, Top of the line Rockville high frequency driver pre installed in an aluminum horn, Titanium diaphragm tweeter, Bolt-on style system, Type: Compression driver

RMS Power: 120W, MAX Power: 360W, Sensitivity: 105dB @ 1w / 1m, 34 oz Magnet, 2” High Temperature Die Cast Kapton Voice Coil

Pair KICKER 46KST2004 3/4" 0.75" 125 Watt Car Audio Tweeters 4-Ohm KST200. Silk-dome tweeters for a smooth, natural sound. Four tweeter mounting options (hardware included). Extended frequency response for ultimate listening. Lightweight neodymium magnets provide efficient highs

In-line 12dB crossover included. Poly-switch protection. Grilles included. Dimension (L x W x H): 3 inch x 3 inch x 3 inch. Weight: 2 lbs. Tweeter: 3/4 in. (20 mm). Tweeter Dome Material: Silk. Rated Impedance: 4 Ohm. Peak Power Handling: 125 Watts. Continuous Power Handling: 65 Watts RMS

Sensitivity: 92 / 1W, 1m. Frequency Response: 4500 Hz-21KHz. Flush Mount Tweeter Depth: 9/16 in. (14 mm). Flush Mount Tweeter Hole Diameter: 1-9/16 in. (40 mm). High Pass [dB], at Frequency: 12 dB, 4500 Hz. Advantages of purchasing from an authorized seller:

Speaker type: 4-inch aluminum super tweeters, Impedance per speaker: 4 Ohm, Power per tweeter set: 90W RMS | 180W MAX, Frequency Response: 2 kHz - 20 kHz

Professional-grade 4-in super tweeters designed to handle high frequencies with ease

Built-in mounted capacitors act as a crossover and protect the bullet tweeters from low-end frequencies

Power RMS/MAX: 300W / 600W. Excellent Transient Response and Low Distortion.

Offers a Frequency Response of 2KHz-25KHz with 4 or 8 Ohms of Impedance and 106dB of Sensitivity.

Ferro fluid enhanced voice coil for a long lasting durability. Overall Dimensions: 4"x 4"x2.5”

Frequency response: 40-21,000 Hz

Midrange Mounting Depth: 3.07"

Tweeter Size: 0.75"

IT'S NOT JUST LOUD,IT'S CLEAN! Utilizing a spun and CNC aluminum construction, chambered Neodymium motor with integrated heatsink fins cast and milled into the motor housing we were able to produce a compact yet large output super tweeter.

POWER YOU CAN COUNT ON.Neodymium tweeter at 100 watts RMS and 200 watts Max at 4 ohms with build in capacitor filter.

HIGH-QUALITY CNC ALUMINUM FRAME WITH AN ULTRA-LIGHT TITANIUM DIAPHRAGM FOR MININAL BREAKUP AT EXTREMELY HIGH SPL. The faceplate, mounting flange and horn assembly are sculpted for minimal acoustic diffraction and with aesthetics in mind. Combined together these create outstanding accuracy and output.

Package Includes: (1) Pair of MB QUART FSB216 6.5" 280 Watt Car Audio Component Speakers. (1) Pair of MB QUART FKB169 6x9" 300 Watt Car Stereo Coaxial Speakers. Features: Pair MB Quart FSB216 6.5" 280 Watt Component Car Speakers. RMS Power Handling: 70 Watts (Per Speaker) / 140 Watts (Per Pair). Peak Power Handling: 140 Watts (Per Speaker) / 280 Watts (Per Pair). Speaker Impedance: 4 Ohms. Frequency Response: 55 Hz - 20 kHz. Sensitivity: 88 dB. Crossover Point: 2 kHz. Crossover Slope: 12 dB

Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability. Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat. Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process

Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response. Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface. Tinsel Leads: Highly conductive while remaining flexible during high power applications

Infinity’s glass fiber woofer cones are lighter and stiffer with more cone-area than the competition , delivering increased low-frequency output and higher efficiency.

Edge-driven textile dome tweeters - These are not commonly used W-domes, but edge-driven textile dome speakers that will deliver broader and smoother high frequency response.

Features: Three-way system, 6.5in MSP woofer, 1.1in soft-dome tweeter, 3in MSP midrange, Frequency response: 40Hz – 20kHz, and System impedance: 4-ohm.

MF172 Woofer: Nominal Impedance: 4-Ohm, Recommended Frequency Range: 40-4000Hz, Power Handling: 120W RMS | 1000W Transient. Total Diameter: 6.85", Mounting Diameter: 5.31", Mounting Depth: 2.63".

MF171 Midrange: Nominal Impedance: 4-Ohm, Recommended Frequency Range: 160-14000Hz, Power Handling: 120W RMS | 1000W Transient. Total Diameter: 3.93", Mounting Diameter: 2.97", and Mounting Depth: 1.69".